CLI tool which enables you to login and retrieve AWS temporary credentials using with ADFS or PingFederate Identity Providers.
This is based on python code from How to Implement a General Solution for Federated API/CLI Access Using SAML 2.0.
The process goes something like this:
- Setup an account alias, either using the default or given a name
- Prompt user for credentials
- Log in to Identity Provider using form based authentication
- Build a SAML assertion containing AWS roles
- Exchange the role and SAML assertion with AWS STS service to get a temporary set of credentials
- Save these credentials to an aws profile named "saml"
- Table of Contents
- Requirements
- Caveats
- Install
- Dependency Setup
- Usage
- Example
- Advanced Configuration
- Building
- Environment vars
- Provider Specific Documentation
- One of the supported Identity Providers
- ADFS (2.x or 3.x)
- PingFederate + PingId
- Okta
- KeyCloak + (TOTP)
- Google Apps
- Shibboleth
- F5APM
- Akamai
- OneLogin
- AWS SAML Provider configured
Aside from Okta, most of the providers in this project are using screen scraping to log users into SAML, this isn't ideal and hopefully vendors make this easier in the future. In addition to this there are some things you need to know:
- AWS defaults to session tokens being issued with a duration of up to 3600 seconds (1 hour), this can now be configured as per Enable Federated API Access to your AWS Resources for up to 12 hours Using IAM Roles and
--session-durationflag. - Every SAML provider is different, the login process, MFA support is pluggable and therefore some work may be needed to integrate with your identity server
If you're on OSX you can install saml2aws using homebrew!
brew tap versent/homebrew-taps
brew install saml2aws
If you're on Windows you can install saml2aws using chocolatey!
choco install saml2aws
saml2aws --version
While brew is available for Linux you can also run the following without using a package manager.
$ CURRENT_VERSION=2.22.0
$ wget https://github.com/Versent/saml2aws/releases/download/v${CURRENT_VERSION}/saml2aws_${CURRENT_VERSION}_linux_amd64.tar.gz
$ tar -xzvf saml2aws_${CURRENT_VERSION}_linux_amd64.tar.gz -C ~/.local/bin
$ chmod u+x ~/.local/bin/saml2aws
Note: You will need to logout of your current user session or force a bash reload for saml2aws to be useable after following the above steps.
e.g. exec -l bash
If you are on Void Linux you can use xbps to install the saml2aws package!
xbps-install saml2aws
Install the AWS CLI see, in our case we are using homebrew on OSX.
brew install awscli
usage: saml2aws [<flags>] <command> [<args> ...]
A command line tool to help with SAML access to the AWS token service.
Flags:
--help Show context-sensitive help (also try --help-long and --help-man).
--version Show application version.
--verbose Enable verbose logging
-i, --provider=PROVIDER This flag is obsolete. See: https://github.com/Versent/saml2aws#configuring-idp-accounts
-a, --idp-account="default" The name of the configured IDP account. (env: SAML2AWS_IDP_ACCOUNT)
--idp-provider=IDP-PROVIDER
The configured IDP provider. (env: SAML2AWS_IDP_PROVIDER)
--mfa=MFA The name of the mfa. (env: SAML2AWS_MFA)
-s, --skip-verify Skip verification of server certificate. (env: SAML2AWS_SKIP_VERIFY)
--url=URL The URL of the SAML IDP server used to login. (env: SAML2AWS_URL)
--username=USERNAME The username used to login. (env: SAML2AWS_USERNAME)
--password=PASSWORD The password used to login. (env: SAML2AWS_PASSWORD)
--mfa-token=MFA-TOKEN The current MFA token (supported in Keycloak, ADFS, GoogleApps). (env: SAML2AWS_MFA_TOKEN)
--role=ROLE The ARN of the role to assume. (env: SAML2AWS_ROLE)
--aws-urn=AWS-URN The URN used by SAML when you login. (env: SAML2AWS_AWS_URN)
--skip-prompt Skip prompting for parameters during login.
--session-duration=SESSION-DURATION
The duration of your AWS Session. (env: SAML2AWS_SESSION_DURATION)
--disable-keychain Do not use keychain at all.
Commands:
help [<command>...]
Show help.
configure [<flags>]
Configure a new IDP account.
login [<flags>]
Login to a SAML 2.0 IDP and convert the SAML assertion to an STS token.
exec [<flags>] [<command>...]
Exec the supplied command with env vars from STS token.
console [<flags>]
Console will open the aws console after logging in.
list-roles
List available role ARNs.
script [<flags>]
Emit a script that will export environment variables.
If the script sub-command is called, saml2aws will output the following temporary security credentials:
export AWS_ACCESS_KEY_ID="ASIAI....UOCA"
export AWS_SECRET_ACCESS_KEY="DuH...G1d"
export AWS_SESSION_TOKEN="AQ...1BQ=="
export AWS_SECURITY_TOKEN="AQ...1BQ=="
SAML2AWS_PROFILE=saml
Powershell, and fish shells are supported as well.
If you use eval $(saml2aws script) frequently, you may want to create a alias for it:
zsh:
alias s2a="function(){eval $( $(command saml2aws) script --shell=bash --profile=$@);}"
bash:
function s2a { eval $( $(which saml2aws) script --shell=bash --profile=$@); }
If the exec sub-command is called, saml2aws will execute the command given as an argument:
By default saml2aws will execute the command with temp credentials generated via saml2aws login.
The --exec-profile flag allows for a command to execute using an aws profile which may have chained
"assume role" actions. (via 'source_profile' in ~/.aws/config)
options:
--exec-profile Execute the given command utilizing a specific profile from your ~/.aws/config file
This is the new way of adding IDP provider accounts, it enables you to have named accounts with whatever settings you like and supports having one default account which is used if you omit the account flag. This replaces the --provider flag and old configuration file in 1.x.
To add a default IdP account to saml2aws just run the following command and follow the prompts.
$ saml2aws configure
? Please choose a provider: Ping
? AWS Profile myaccount
? URL https://example.com
? Username [email protected]
? Password
No password supplied
account {
URL: https://example.com
Username: [email protected]
Provider: Ping
MFA: Auto
SkipVerify: false
AmazonWebservicesURN: urn:amazon:webservices
SessionDuration: 3600
Profile: myaccount
}
Configuration saved for IDP account: default
Then to login using this account.
saml2aws login
You can also add named accounts, below is an example where I am setting up an account under the wolfeidau alias, again just follow the prompts.
saml2aws configure -a wolfeidau
You can also configure the account alias without prompts.
saml2aws configure -a wolfeidau --idp-provider KeyCloak --username [email protected] \
--url https://keycloak.wolfe.id.au/auth/realms/master/protocol/saml/clients/amazon-aws --skip-prompt
Then your ready to use saml2aws.
Log into a service (without MFA).
$ saml2aws login
Using IDP Account default to access Ping https://id.example.com
To use saved password just hit enter.
Username [[email protected]]:
Password: ************
Authenticating as [email protected] ...
Selected role: arn:aws:iam::123123123123:role/AWS-Admin-CloudOPSNonProd
Requesting AWS credentials using SAML assertion
Saving credentials
Logged in as: arn:aws:sts::123123123123:assumed-role/AWS-Admin-CloudOPSNonProd/[email protected]
Your new access key pair has been stored in the AWS configuration
Note that it will expire at 2016-09-19 15:59:49 +1000 AEST
To use this credential, call the AWS CLI with the --profile option (e.g. aws --profile saml ec2 describe-instances).
Log into a service (with MFA).
$ saml2aws login
Using IDP Account default to access Ping https://id.example.com
To use saved password just hit enter.
Username [[email protected]]:
Password: ************
Authenticating as [email protected] ...
Enter passcode: 123456
Selected role: arn:aws:iam::123123123123:role/AWS-Admin-CloudOPSNonProd
Requesting AWS credentials using SAML assertion
Saving credentials
Logged in as: arn:aws:sts::123123123123:assumed-role/AWS-Admin-CloudOPSNonProd/[email protected]
Your new access key pair has been stored in the AWS configuration
Note that it will expire at 2016-09-19 15:59:49 +1000 AEST
To use this credential, call the AWS CLI with the --profile option (e.g. aws --profile saml ec2 describe-instances --region us-east-1).
Configuring multiple accounts with custom role and profile in ~/.aws/config with goal being isolation between infra code when deploying to these environments. This setup assumes you're using separate roles and probably AWS accounts for dev and test and is designed to help operations staff avoid accidentally deploying to the wrong AWS account in complex environments. Note that this method configures SAML authentication to each AWS account directly (in this case different AWS accounts). In the example below, separate authentication values are configured for AWS accounts 'profile=customer-dev/awsAccount=was 121234567890' and 'profile=customer-test/awsAccount=121234567891'
To setup the dev account run the following and enter URL, username and password, and assign a standard role to be automatically selected on login.
saml2aws configure -a customer-dev --role=arn:aws:iam::121234567890:role/customer-admin-role -p customer-dev
This will result in the following configuration in ~/.saml2aws.
[customer-dev]
url = https://id.customer.cloud
username = [email protected]
provider = Ping
mfa = Auto
skip_verify = false
timeout = 0
aws_urn = urn:amazon:webservices
aws_session_duration = 28800
aws_profile = customer-dev
role_arn = arn:aws:iam::121234567890:role/customer-admin-role
To use this you will need to export AWS_DEFAULT_PROFILE=customer-dev environment variable to target dev.
To setup the test account run the following and enter URL, username and password.
saml2aws configure -a customer-test --role=arn:aws:iam::121234567891:role/customer-admin-role -p customer-test
This results in the following configuration in ~/.saml2aws.
[customer-test]
url = https://id.customer.cloud
username = [email protected]
provider = Ping
mfa = Auto
skip_verify = false
timeout = 0
aws_urn = urn:amazon:webservices
aws_session_duration = 28800
aws_profile = customer-test
role_arn = arn:aws:iam::121234567891:role/customer-admin-role
To use this you will need to export AWS_DEFAULT_PROFILE=customer-test environment variable to target test.
Advanced Configuration (Multiple AWS account access but SAML authenticate against a single 'SSO' AWS account)
Example: (Authenticate to my 'SSO' AWS account. With this setup, there is no need to authenticate again. We can now rely on IAM to assume role cross account)
~/.aws/credentials: #(these are generated by saml2aws login. Sets up SAML authentication into my AWS 'SSO' account)
[saml]
aws_access_key_id = AAAAAAAAAAAAAAAAB
aws_secret_access_key = duqhdZPRjEdZPRjE=dZPRjEhKjfB
aws_session_token = #REMOVED#
aws_security_token = #REMOVED#
x_principal_arn = arn:aws:sts::000000000123:assumed-role/myInitialAccount
x_security_token_expires = 2019-08-19T15:00:56-06:00
(Use AWS profiles to assume an aws role cross-account) (Note that the "source_profile" is set to SAML which is my SSO AWS account since it is already authenticated)
~/.aws/config:
[profile roleIn2ndAwsAccount]
source_profile=saml
role_arn=arn:aws:iam::123456789012:role/OtherRoleInAnyFederatedAccount # Note the different account number here
role_session_name=myAccountName
[profile extraRroleIn2ndAwsAccount]
# this profile uses a _third_ level of role assumption
source_profile=roleIn2ndAwsAccount
role_arn=arn:aws:iam::123456789012:role/OtherRoleInAnyFederatedAccount
Running saml2aws without --exec-profile flag:
saml2aws exec aws sts get-caller-identity
{
"UserId": "AROAYAROAYAROAYOO:myInitialAccount",
"Account": "000000000123",
"Arn": "arn:aws:sts::000000000123:assumed-role/myInitialAccount" # This shows my 'SSO' account (SAML profile)
}
Running saml2aws with --exec-profile flag:
When using '--exec-profile' I can assume-role into a different AWS account without re-authenticating. Note that it does not re-authenticate since we are already authenticated via the SSO account.
saml2aws exec --exec-profile roleIn2ndAwsAccount aws sts get-caller-identity
{
"UserId": "YOOYOOYOOYOOYOOA:/myAccountName",
"Account": "123456789012",
"Arn": "arn:aws:sts::123456789012:assumed-role/myAccountName"
}
As an example
saml2aws login
aws s3 ls --profile saml
An error occurred (AccessDenied) when calling the ListBuckets operation: Access Denied
# This is denied in this example because there are no S3 buckets in the 'SSO' AWS account
saml2aws exec --exec-profile roleIn2ndAwsAccount aws s3 ls # Runs given CMD with environment configured from --exec-profile role
# If we check env variables we see that our environment is configured with temporary credentials for our 'assumed role'
env | grep AWS
AWS_SESSION_TTL=12h
AWS_FEDERATION_TOKEN_TTL=12h
AWS_ASSUME_ROLE_TTL=1h
AWS_ACCESS_KEY_ID=AAAAAAAASORTENED
AWS_SECRET_ACCESS_KEY=secretShortened+6jJ5SMqsM5CkYi3Gw7
AWS_SESSION_TOKEN=ShortenedTokenXXX=
AWS_SECURITY_TOKEN=ShortenedSecurityTokenXXX=
# If we desire to execute multiple commands utilizing our assumed profile, we can obtain a new shell with Env variables configured for access
saml2aws exec --exec-profile roleIn2ndAwsAccount $SHELL # Get a new shell with AWS env vars configured for 'assumed role' account access
# We are now able to execute AWS cli commands with our assume role permissions
# Note that we do not need a --profile flag because our environment variables were set up for this access when we obtained a new shell with the --exec-profile flag
aws s3 ls
2019-07-30 01:32:59 264998d7606497040-sampleBucket
aws iam list-groups
{
"Groups": [
{
"Path": "/",
"GroupName": "MyGroup",
"GroupId": "AGAGTENTENTENGOCQFK",
"Arn": "arn:aws:iam::123456789012:group/MyGroup",
"CreateDate": "2019-05-13T16:12:19Z"
]
}
}
To build this software on osx clone to the repo to $GOPATH/src/github.com/versent/saml2aws and ensure you have $GOPATH/bin in your $PATH.
make mod
Install the binary to $GOPATH/bin.
make install
Then to test the software just run.
make test
The exec sub command will export the following environment variables.
- AWS_ACCESS_KEY_ID
- AWS_SECRET_ACCESS_KEY
- AWS_SESSION_TOKEN
- AWS_SECURITY_TOKEN
- EC2_SECURITY_TOKEN
- AWS_PROFILE
- AWS_DEFAULT_PROFILE
Note: That profile environment variables enable you to use exec with a script or command which requires an explicit profile.
This tool would not be possible without some great opensource libraries.
- goquery html querying
- etree xpath selector
- kingpin command line flags
- aws-sdk-go AWS Go SDK
- go-ini INI file parser
- go-ntlmssp NTLM/Negotiate authentication
Install github-release.
go get github.com/buildkite/github-release
To release run.
make release
There are two levels of debugging, first emits debug information and the URL / Method / Status line of requests.
saml2aws login --verbose
The second emits the content of requests and responses, this includes authentication related information so don't copy and paste it into chat or tickets!
DUMP_CONTENT=true saml2aws login --verbose
This code is Copyright (c) 2018 Versent and released under the MIT license. All rights not explicitly granted in the MIT license are reserved. See the included LICENSE.md file for more details.