FAQ

Why is my execution so slow?

Typically, it’s due to

• Instrumenting every instruction executed.
• Instrumenting every memory access.

Optimize your program with less instrumentation.

Why do I get a wrong PC after emulation stops?

PC is only guaranteed to be correct if you install UC_HOOK_CODE. This is due to the fact that updating PC is a big performance overhead during emulation.

I get an “Unhandled CPU Exception”, why?

Unicorn is a pure CPU emulator and usually it’s due to no handler registered for instructions like syscall and SVC. If you expect system emulation, you probably would like qiling framework.

I would like to instrument a specific instruction but get a UC_ERR_HOOK, why?

Currently, only a small subset of the instructions can be instrumented.

On x86, all available instructions are: in out syscall sysenter cpuid.

Emulating some instructions gives an error, what should I do?

1. Some instructions are not enabled by default on some architectures. For example, you have to setup CSR on RISC-V or VFP on ARM before emulating floating-point instructions. Refer to the corresponding manual to check if you leave out possible switches in special registers.
2. If you are on ARM, please check whether you are emulating a THUMB instruction. If so, please use UC_MODE_THUMB and make sure the starting address is odd.
3. If either is not the case, it might be some newer instruction sets that qemu5 doesn’t support.

If you are still using Unicorn1, please upgrade to Unicorn2 for better support.

I can't recover from unmapped read/write even I return true in the hook, why?

This is a minor change in memory hooks behavior between Unicorn1 and Unicorn2. To gracefully recover from memory read/write error, you have to map the invalid memory before you return true.

It is due to the fact that, if users return true without memory mapping set up correctly, we don't know what to do next. In Unicorn1, the behavior is undefined in this case but in Unicorn2 we would like to force users to set up memory mapping in the hook to continue execution.

See the sample for details.

KeyboardInterrupt is not raised during uc.emu_start

This is intended as python signal module states:

A long-running calculation implemented purely in C (such as regular expression matching on a large body of text) may run uninterrupted for an arbitrary amount of time, regardless of any signals received. The Python signal handlers will be called when the calculation finishes.

A workaround is to start emulation in another thread.

How to emulate interrupts (or ticks) with Unicorn?

As stated, Unicorn is a pure CPU emulator. For such emulation, you have two choices:

• Use the timeout parameter of uc_emu_start
• Use the count parameter of uc_emu_start

After emulation stops, you may check anything you feel interested and resume emulation accordingly.

Note that for cortex-m exec_return, Unicorn has a magic software exception with interrupt number 8. You may register a hook to handle that.

Why not keep up the upstream qemu?

To provide end users with simple API, Unicorn does lots of dirty hacks within qemu code which prevents it from sync painlessly.

Is there anyway to disable softmmu to speed up execution?

Yes, it’s possible but that is not Unicorn’s goal and there is no simple switch in qemu to disable softmmu.

I'd like to make contributions, where do I start?

See milestones and coding convention.

Be sure to send pull requests for our dev branch only.

Which qemu version is Unicorn based on?

Prior to 2.0.0, Unicorn is based on qemu 2.2.1. After that, Unicorn is based on qemu 5.0.1.