Introduction

LidarView performs real-time reception, recording, visualization and processing of 3D LiDAR data.

LidarView's open source codebase developed by Kitware is used to display live LiDAR data from Velodyne, Ouster, Opsys, Lumotive, RoboSense, Hesai, LeiShen LS Lidar, and more.

Many of these LiDAR sensors sweep an array of lasers (often 8 to 128) 360° with a vertical field of view of tens of degrees at a 5-20Hz spinning frequency, capturing about a million points per second.

LidarView can display live sensors' streams or playback pre-recorded data stored in .pcap files.

LidarView displays the distance measurements from the LiDAR as point cloud data and custom color maps for multiple variables such as intensity-of-return, time, distance, azimuth, and laser id.

The processed data can be exported in multiple file formats (CSV, PLY, LAS, ...), and screenshots of the currently displayed point cloud can be easily exported with the help of a button.

As a Paraview based application, LidarView can effortlessly offer Paraview's features and plugins.

Lidar data processed by Kitware's SLAM within LidarView

Features

• Input from live sensor stream or recorded .pcap file
• Visualization of timestamped LiDAR returns in 3D
• Spreadsheet inspector for LiDAR attributes (timestamp, azimuth, laser id, etc)
• Record to .pcap from sensor
• Export to CSV, PLY, PCD, LAS or VTK formats
• Record and export GPS and IMU data
• Visualize GPS data paths
• Grid and Ruler tools
• Show or hide lasers subsets
• Show multiple frames of data simultaneously and aggregate them
• Apply 3D transforms to pointclouds
• Run SLAM to estimate the trajectory of the LiDAR in the scene and build a 3D map of the environment

How to get

Lidarview is maintained on the following platforms:

• Ubuntu 18, Ubuntu 20
• Windows x64
• MacOS 10.10

See detailed general installation instructions on the LVCore/Documentation/INSTALLATION.md page.

See the Detailed installation instructions for the current and older releases on the RELEASES.md page.

See associated download links in the Release page of this repository.

Build from source

Most of the LidarView common codebase lies within:

• LVCore repository.
• LidarView-superbuild repository.

Detailed Instructions to build and package LidarView are available under LVCore/Documentation/LidarView_Developer_Guide.md.

How to use

Sensor streaming

Specific network configuration is required for sensor livestream. The ethernet adapter connected to the sensor has to be switched from dynamic IP address assignment to static IP address selection and correct IP adress and gateway must be specified.

For example:

• Velodyne HDL-32E
  • IP address: 192.168.1.70 (70 as example, any number except 201 works)
  • Gateway: 255.255.255.0
• Velodyne HDL-64E
  • IP address: 192.168.3.70 (70 as example, any number except 43 works)
  • Gateway: 192.168.3.255

In order for sensor streaming to work properly, it is important to disable firewall restrictions for the chosen ethernet port and allow inbound traffic. Alternatively, completely disable the firewall for the ethernet device connected to the sensor (including both public and private networks).

When opening pre-recorded data or live sensor streaming data, one is prompted to choose a calibration file. This calibration can either be directly embedded in LidarView, or may be loaded from a custom location.

SLAM documentation

More instructions can be found on the LidarSlam repository.

Have a look also at the How to SLAM with LidarView webinar.

Sample data

LiDAR data samples for LidarView can be obtained from:

• MIDAS in the Velodyne LiDAR collection
• Kitware's demos shared drive

For Github users

Github is a mirror of the official repository. We do not actively monitor issues or pull request on Github. Please use the official repository to report issues or contributes fixes.

License

The source code for LidarView is made available under the Apache 2.0 license.

See LICENSE.