Tarantool NginX upstream module

Key features:

Both nginx and Tarantool features accessible over HTTP(S).
Tarantool methods callable via JSON-RPC or REST.
Load balancing with elastic configuration.
Backup and fault tolerance.
Low overhead.

See more about:

Limitations

WebSockets are not supported until Tarantool supports out-of-band replies.
This module does not support Tarantool 1.6.x starting with 2.4.0. Since then it uses Tarantool 1.7 protocol features.

Docker images

Tarantool NginX upstream module: https://hub.docker.com/r/tarantool/tarantool-nginx

Tarantool: https://hub.docker.com/r/tarantool/tarantool

Status

v0.1.4 - Production ready.
v0.2.0 - Stable.
v0.2.1 - Production ready.
v0.2.2 - Stable.
v2.3.1 - Production ready.
v2.3.2 - production ready.
v2.3.7 - Production ready.
v2.4.0-beta - Beta.
v2.4.6-rc1 - Stable.
v2.5-rc{1,2} - Stable.
v2.5-stable - Stable.
v2.6-rc3 - Stable.

How to install

Build from source

git clone https://github.com/tarantool/nginx_upstream_module.git nginx_upstream_module
cd nginx_upstream_module
git submodule update --init --recursive
git clone https://github.com/nginx/nginx.git nginx

# Ubuntu
apt-get install libpcre++0 gcc unzip libpcre3-dev zlib1g-dev libssl-dev libxslt-dev

make build-all

Build via nginx 'configure'

Requirements (for details, see REPO_ROOT/Makefile)

libyajl >= 2.0(https://lloyd.github.io/yajl/)
libmsgpuck >= 2.0 (https://github.com/rtsisyk/msgpuck)

$ ./configure --add-module=REPO_ROOT && make

Install on Mac OS X

brew tap denji/nginx
brew install nginx-full --with-tarantool-module

Configure

    ## Typical configuration, for more see http://nginx.org/en/docs/http/ngx_http_upstream_module.html#upstream
    upstream backend {
        server 127.0.0.1:9999 max_fails=1 fail_timeout=30s;
        server 127.0.0.1:10000;

        # ...
        server 127.0.0.1:10001 backup;

        # ...
    }

    server {
      location = /tnt {
        tnt_pass backend;
      }
    }

Back to contents

Test run and notes for contributors

This paragraph is actual only if you choose build from source installation. So that, nginx git repository should be placed into nginx directory within the module repository. But now, you should use make configure-for-testing. It points the path to the necessary for testing configs, so it is needed to run tests.

To run all tests with different nginx versions use ./test/auto.sh. It will checkout several nginx versions, rebuild nginx with the module and run tests on each of those nginx versions.

For selective running, start:

nginx in other terminal with ./nginx/objs/nginx -c conf/nginx.conf,
Tarantool in another terminal with tarantool test/test.lua,
run separate test file, e.g. ./test/basic_features.py.

If you want to add new test, see examples: *_features.py files. Don't forget to include it to test/run_all.sh.

You can set VERBOSE environment variable to True to enable debug info.

Back to contents

REST

Note: since v0.2.0

With this module, you can call Tarantool stored procedures via HTTP REST methods (GET, POST, PUT, PATCH, DELETE).

Example:

    upstream backend {
      # Tarantool hosts
      server 127.0.0.1:9999;
    }

    server {
      # HTTP [GET | POST | PUT | PATCH | DELETE] /tnt_rest?q=1&q=2&q=3
      location /tnt_rest {
        # REST mode on
        tnt_http_rest_methods get post put patch delete; # or all

        # Pass http headers and uri
        tnt_pass_http_request on;

        # Module on
        tnt_pass backend;
      }
    }

-- Tarantool procedure
function tnt_rest(req)
 req.headers -- http headers
 req.uri -- uri
 return { 'ok' }
end

 $> wget NGX_HOST/tnt_rest?arg1=1&argN=N

Back to contents

JSON

Note: since v0.1.4

The module expects JSON posted with HTTP POST, PUT (since v0.2.0), or PATCH (since v2.3.8) and carried in request body.

Server HTTP statuses:

OK - response body contains a result or an error; the error may appear only if something wrong happened within Tarantool, for instance: 'method not found'.
INTERNAL SERVER ERROR - may appear in many cases, most of them being 'out of memory' error.
NOT ALLOWED - in response to anything but a POST request.
BAD REQUEST - JSON parse error, empty request body, etc.
BAD GATEWAY - lost connection to Tarantool server(s). Since both (i.e. json -> tp and tp -> json) parsers work asynchronously, this error may appear if 'params' or 'method' does not exists in the structure of the incoming JSON, please see the protocol description for more details.

Note: this behavior will change in the future.

Input JSON form

[ { "method": STR, "params":[arg0 ... argN], "id": UINT }, ...N ]

method - a string containing the name of the Tarantool method to be invoked (i.e. Tarantool "call")
params - a structured array. Each element is an argument of the Tarantool "call".
id - an identifier established by the Client. MUST contain an unsigned number not greater than unsigned int. May be 0.

These all are required fields.

Output JSON form

[ { "result": JSON_RESULT_OBJECT, "id":UINT, "error": { "message": STR, "code": INT } }, ...N ]

result - Tarantool execution result (a json object/array, etc). Version 2.4.0+ outputs a raw result, i.e. JSON_RESULT_OBJECT. May be null or undefined.
id - DEPRECATED in 2.4.0+ - request id. May be null or undefined.
error - a structured object which contains an internal error message. This field exists only if an internal error occurred, for instance: "too large request", "input json parse error", etc.

If this field exists, the input message was probably not passed to the Tarantool backend.

See "message"/"code" fields for details.

Example

For instance, Tarantool has a stored procedure echo:

function echo(a, b, c, d)
  return a, b, c, d
end

Syntax:

--> data sent to Server
<-- data sent to Client

rpc call 1:

--> { "method": "echo", "params": [42, 23], "id": 1 }
<-- { "id": 1, "result": [42, 23]

rpc call 2:

--> { "method": "echo", "params": [ [ {"hello": "world"} ], "!" ], "id": 2 }
<-- { "id": 2, "result": [ {"hello": "world"} ], "!" ]}

rpc call of a non-existent method:

--> { "method": "echo_2", "id": 1 }
<-- { "error": {"code": -32601, "message": "Method not found"}, "id": 1 }

rpc call with invalid JSON:

--> { "method": "echo", "params": [1, 2, 3, __wrong__ ] }
<-- { "error": { "code": -32700, "message": "Parse error" } }

rpc call Batch:

--> [
      { "method": "echo", "params": [42, 23], "id": 1 },
      { "method": "echo", "params": [ [ {"hello": "world"} ], "!" ], "id": 2 }
]
<-- [
      { "id": 1, "result": [42, 23]},
      { "id": 2, "result" : [{"hello": "world"} ], "!" ]},
]

rpc call Batch of a non-existent method:

--> [
      { "method": "echo_2", "params": [42, 23], "id": 1 },
      { "method": "echo", "params": [ [ {"hello": "world"} ], "!" ], "id": 2 }
]
<-- [
      { "error": {"code": -32601, "message": "Method not found"}, "id": 1 },
      {"id": 2, "result": [ {"hello": "world"} ], "!" ]}
]

rpc call Batch with invalid JSON:

--> [
      { "method": "echo", "params": [42, 23, __wrong__], "id": 1 },
      { "method": "echo", "params": [ [ {"hello": "world"} ], "!" ], "id": 2 }
]
<-- { "error": { "code": -32700, "message": "Parse error" } }

Back to contents

HTTP headers and status

Sometimes you have to set status or headers which came from Tarantool. For this purpose, you have to use something like ngx_lua or ngx_perl, etc.

With the methods, you can also transform the result from Tarantool into something else.

Here is an example with ngx_lua:

  -- Tarantool, stored procedure
  function foo(req, ...)
    local status = 200
    local headers = {
      ["X-Tarantool"] = "FROM_TNT",
    }
    local body = 'It works!'
    return status, headers, body
  end

  # Nginx, configuration

  # If you're experience an problem with lua-resty-core like
  # https://github.com/openresty/lua-nginx-module/issues/1509
  # it can be disabled by the following directive.
  #
  # lua_load_resty_core off;

  # If you're not using lua-resty-core you may need to manually specify a path
  # to cjson module. See the documentation:
  # https://github.com/openresty/lua-nginx-module#lua_package_cpath
  #
  # lua_package_cpath "/path/in/lua/cpath/format/?.so";

  upstream tnt_upstream {
     server 127.0.0.1:9999;
     keepalive 10000;
  }

  location /tnt_proxy {
    internal;
    tnt_method foo;
    tnt_buffer_size 100k;
    tnt_pass_http_request on parse_args;
    tnt_pass tnt_upstream;
  }

  location /api {
    default_type application/json;
    rewrite_by_lua '

       local cjson = require("cjson")

       local map = {
         GET = ngx.HTTP_GET,
         POST = ngx.HTTP_POST,
         PUT = ngx.HTTP_PUT,
         -- ...
       }
       -- hide `{"params": [...]}` from a user
       ngx.req.read_body()
       local body = ngx.req.get_body_data()
       if body then
            body = "{\\"params\\": [" .. body .. "]}"
       end
       local res = ngx.location.capture("/tnt_proxy", {
         args = ngx.var.args,
         method = map[ngx.var.request_method],
         body = body
       })

       if res.status == ngx.HTTP_OK then
         local answ = cjson.decode(res.body)

         -- Read reply
         local result = answ["result"]

         if result ~= nil then
           ngx.status = result[1]
           for k, v in pairs(result[2]) do
             ngx.header[k] = v
           end

           local body = result[3]
           if type(body) == "string" then
             ngx.header["content_type"] = "text/plain"
             ngx.print(body)
           elseif type(body) == "table" then
             local body = cjson.encode(body)
             ngx.say(body)
           else
             ngx.status = 502
             ngx.say("Unexpected response from Tarantool")
           end
         else
           ngx.status = 502
           ngx.say("Tarantool does not work")
         end

         -- Finalize execution
         ngx.exit(ngx.OK)
       else
         ngx.status = res.status
         ngx.say(res.body)
       end
       ';
    }

Back to contents

Directives

tnt_pass

syntax: tnt_pass UPSTREAM

default: no

context: location

Specify the Tarantool server backend.

  upstream tnt_upstream {
     127.0.0.1:9999
  };

  location = /tnt {
    tnt_pass 127.0.0.1:9999;
  }

  location = /tnt_next_location {
     tnt_pass tnt_upstream;
  }

Back to contents

tnt_http_methods

syntax: tnt_http_methods post, put, patch, delete, all

default: post, delete

context: location

Allow to accept one or many http methods. If a method is allowed, the module expects JSON carried in the request body. If tnt_method is not set, then the name of the Tarantool stored procedure is the protocol JSON.

Example:

  location tnt {
    tnt_http_methods delete;
    tnt_pass 127.0.0.1:9999;
  }

  # Call tarantool_stored_procedure_name()
  $> wget --method=delete --body-data='{"method":"lua_function", "params": [], "id": 0}' NGINX_HOST/tnt

Back to contents

tnt_http_rest_methods

syntax: tnt_http_rest_methods get, post, put, patch, delete, all

default: no

context: location

NOTICE: This does not restrict anything. The option just says to NGINX: use this methods for allowing REST requests.

If you have a wish to set some methods as not allowed methods, then please use "if" inside locations.

For example:

if ($request_method !~ ^(GET|POST|HEAD)$) {
    return 405 "Please use HEAD, PATCH and so on";
}

Allow to accept one or more REST methods. If tnt_method is not set, then the name of the Tarantool stored procedure is the first part of the URL path.

Example:

  location tnt {
    tnt_http_rest_methods get;
    tnt_pass 127.0.0.1:9999;
  }

  # Call tarantool_stored_procedure_name()
  $> wget NGINX_HOST/tarantool_stored_procedure_name/some/mega/path?q=1

Back to contents

tnt_pass_http_request

default: off

context: location, location if

Allow to pass HTTP headers and queries to Tarantool stored procedures.

Examples #1:

  location tnt {
    # Also, tnt_pass_http_request can be used together with JSON communication
    tnt_http_rest_methods get;

    # [on|of]
    tnt_pass_http_request on;
    tnt_pass 127.0.0.1:9999;
  }

  function tarantool_stored_procedure_name(req, ...)
    req.headers -- lua table
    req.query -- string
    return { 'OK' }
  end

  -- With parse_args
  function tarantool_stored_procedure_name_1(req, ...)
    req.headers -- lua table
    req.query -- string
    req.args -- query args as lua table
    return { 'OK' }
  end

  -- With pass_body
  function tarantool_stored_procedure_name_2(req, ...)
    req.body -- request body, type string
  end

Examples #2 (pass_headers_out):

  location @tnt {
    tnt_http_rest_methods get;
    tnt_pass_http_request on pass_headers_out;
    tnt_method tarantool_stored_procedure_name;
    tnt_pass 127.0.0.1:9999;
  }

  location / {
    add_header "X-Req-time" "$request_time";
    proxy_pass http://backend;
    post_action @tnt;
  }

  function tarantool_stored_procedure_name(req, ...)
    req.headers -- lua table
    req.headers['X-Req-time'] -- set by add_header
    req.query -- string
    return true
  end

Examples #3 (parse_urlencoded):

  location /tnt {
    tnt_http_rest_methods post;
    tnt_pass_http_request on parse_urlencoded;
    tnt_method tarantool_stored_procedure_name;
    tnt_pass 127.0.0.1:9999;
  }

  function tarantool_stored_procedure_name(req, ...)
    req.headers -- a lua table
    req.query -- a string
    req.args.q -- 1
    req.args_urlencoded.p -- 2
    return true
  end

  # Call tarantool_stored_procedure_name()
  $> wget NGINX_HOST/tarantool_stored_procedure_name/some/mega/path?q=1 --post-data='p=2'

Examples #4 (pass_subrequest_uri):

Origin (unparsed) uri

  location /web {
    # Backend processing /web/foo and replying with X-Accel-Redirect to
    # internal /tnt/bar
    proxy_pass http://x-accel-redirect-backend;
  }
  location /tnt {
    internal;
    tnt_pass_http_request on;
    tnt_method tarantool_xar_handler;
    tnt_pass 127.0.0.1:9999;
  }

  function tarantool_xar_handler(req, ...)
    print(req.uri) -- /web/foo
    return true
  end

Subrequest uri

  location /web {
    # Backend processing /web/foo and replying with X-Accel-Redirect to
    # internal /tnt/bar
    proxy_pass http://x-accel-redirect-backend;
  }
  location /tnt {
    internal;
    tnt_pass_http_request on pass_subrequest_uri;
    tnt_method tarantool_xar_handler;
    tnt_pass 127.0.0.1:9999;
  }

  function tarantool_xar_handler(req, ...)
    print(req.uri) -- /tnt/bar
    return true
  end

Back to contents

tnt_pass_http_request_buffer_size

syntax: tnt_pass_http_request_buffer_size SIZE

default: 4k, 8k

context: location

Specify the size of the buffer used for tnt_pass_http_request.

Back to contents

tnt_method

syntax: tnt_method STR

default: no

context: location, location if

Specify the Tarantool call method. It can take a nginx's variable.

Examples:

  location tnt {
    # Also tnt_pass_http_request can mix with JSON communication [[
    tnt_http_rest_methods get;
    tnt_method tarantool_stored_procedure_name;
    #]]

    # [on|of]
    tnt_pass_http_request on;
    tnt_pass 127.0.0.1:9999;
  }

  location ~ /api/([-_a-zA-Z0-9/]+)/ {
    # Also tnt_pass_http_request can mix with JSON communication [[
    tnt_http_rest_methods get;
    tnt_method $1;
    #]]

    # [on|of]
    tnt_pass_http_request on;
    tnt_pass 127.0.0.1:9999;
  }

  function tarantool_stored_procedure_name(req, ...)
    req.headers -- lua table
    req.query -- string
    return { 'OK' }
  end

  function call(req, ...)
    req.headers -- lua table
    req.query -- string
    return req, ...
  end

  # OK Call tarantool_stored_procedure_name()
  $> wget NGINX_HOST/tarantool_stored_procedure_name/some/mega/path?q=1

  # Error Call tarantool_stored_procedure_XXX()
  $> wget NGINX_HOST/tarantool_stored_procedure_XXX/some/mega/path?q=1

  # OK Call api_function
  $> wget NGINX_HOST/api/call/path?q=1

Back to contents

tnt_set_header

syntax: tnt_set_header STR STR

default: no

context: location, location if

Allows redefining or appending fields to the request header passed to the Tarantool proxied server. The value can contain text, variables, and their combinations.

Examples:

  location tnt {
    # Also tnt_pass_http_request can mix with JSON communication [[
    tnt_http_rest_methods get;
    tnt_method tarantool_stored_procedure_name;
    #]]

    tnt_set_header X-Host $host;
    tnt_set_header X-GEO-COUNTRY $geoip_country_code;

    # [on|of]
    tnt_pass_http_request on;
    tnt_pass 127.0.0.1:9999;
  }

  function tarantool_stored_procedure_name(req, ...)
    req.headers['X-Host'] -- a hostname
    req.headers['X-GEO-COUNTRY'] -- a geo country
    return { 'OK' }
  end

  # OK Call tarantool_stored_procedure_name()
  $> wget NGINX_HOST/tarantool_stored_procedure_name/some/mega/path?q=1

Back to contents

tnt_send_timeout

syntax: tnt_send_timeout TIME

default: 60s

context: http, server, location

The timeout for sending TCP requests to the Tarantool server, in seconds by default.

It's wise to always explicitly specify the time unit to avoid confusion. Time units supported are: s(seconds), ms(milliseconds), y(years), M(months), w(weeks), d(days), h(hours), and m(minutes).

Back to contents

tnt_read_timeout

syntax: tnt_read_timeout TIME

default: 60s

context: http, server, location

The timeout for reading TCP responses from the Tarantool server, in seconds by default.

It's wise to always explicitly specify the time unit to avoid confusion. Time units supported are: s(seconds), ms(milliseconds), y(years), M(months), w(weeks), d(days), h(hours), and m(minutes).

Back to contents

tnt_connect_timeout

syntax: tnt_connect_timeout TIME

default: 60s

context: http, server, location

The timeout for connecting to the Tarantool server, in seconds by default.

It's wise to always explicitly specify the time unit to avoid confusion. Time units supported are: s(seconds), ms(milliseconds), y(years), M(months), w(weeks), d(days), h(hours), and m(minutes). This time must be strictly less than 597 hours.

Back to contents

tnt_buffer_size

syntax: tnt_buffer_size SIZE

default: 4k, 8k

context: http, server, location

This buffer size is used for reading Tarantool replies, but it's not required to be as big as the largest possible Tarantool reply.

Back to contents

tnt_next_upstream

syntax: tnt_next_upstream [ error | timeout | invalid_response | off ]

default: error timeout

context: http, server, location

Specify which failure conditions should cause the request to be forwarded to another upstream server. Applies only when the value in tnt_pass is an upstream with two or more servers.

Back to contents

tnt_next_upstream_tries

syntax: tnt_next_upstream_tries SIZE

default: 0

context: http, server, location

Limit the number of possible tries for passing a request to the next server. The 0 value turns off this limitation.

Back to contents

tnt_next_upstream_timeout

syntax: tnt_next_upstream_timeout TIME

default: 0

context: http, server, location

Limit the time during which a request can be passed to the next server. The 0 value turns off this limitation.

Back to contents

tnt_pure_result

syntax: tnt_pure_result [on|off]

default: off

context: http, server, location

Whether to wrap Tarantool response or not.

When this option is off:

{"id":0, "result": [ 1 ]}

When this option is on:

[[1]]

Back to contents

tnt_multireturn_skip_count

DEPRECATED in 2.4.0+, RETURNED IN 2.5.0-rc2+

syntax: tnt_multireturn_skip_count [0|1|2]

default: 0

context: http, server, location

Note: Use this option wisely, it does not validate the outgoing JSON! For details you can check this issue: #102

The module will skip one or more multireturn parts when this option is > 0.

When it is set to 0:

{"id":0, "result": [[1]]}

When it is set to 1:

{"id":0, "result": [1]}

When it is set to 2:

{"id": 0, "result": 1}

Back to contents

Format

syntax: tnt_{OPT} [ARGS] [FMT]

Tarantool stores data in tuples. A tuple is a list of elements. Each element is a value or an object, and each element should have a strong type. The tuple format is called MsgPack, it's like JSON in a binary format.

The main goal of Format (see [FMT] above) is to enable conversion between a query string and MsgPack without losing type information or value.

The syntax is: {QUERY_ARG_NAME}=%{FMT_TYPE}

Please look carefully for yours url encoding!

A good example is (also see examples tnt_update and tnt_upsert):

HTTP GET ... /url?space_id=512&value=some+string
it could be matched by using the following format 'space_id=%%space_id,value=%s'

Also this works with HTTP forms, i.e. HTTP POST, HTTP PUT and so on.

Here is a full list of {FMT_TYPE} types:

TUPLES

%n - int64
%f - float
%d - double
%s - string
%b - boolean

Special types

%%space_id - space_id
%%idx_id - index_id
%%off - [select](#tnt_select) offset
%%lim - [select](#tnt_select) limit
%%it - [select](#tnt_select) iterator type, allowed values are:
                             eq,req,all,lt,le,ge,gt,all_set,any_set,
                             all_non_set,overlaps,neighbor

KEYS (for [tnt_update](#tnt_update))

%kn - int64
%kf - float
%kd - double
%ks - string
%kb - boolean

Operations (for [tnt_upsert](#tnt_upsert))

%on - int64
%of - float
%od - double
%os - string
%ob - boolean

Examples can be found at:

examples/simple_rest_client.py
examples/simple_rest_client.sh

Back to contents

tnt_insert

syntax: tnt_insert [SIZE or off] [FMT]

default: None

context: location, location if

HTTP methods GET, POST, PUT, PATCH, DELETE

Content-Typer default, application/x-www-form-urlencoded

This directive allows executing an insert query with Tarantool.

The first argument is a space id.
The second argument is a format string.

Returns HTTP code 4XX if client's request doesn't well formatted. It means, that this error raised if some of values missed or has wrong type.

Returns HTTP code 5XX if upstream is dead (no ping).

Also it can return an HTTP code 200 with an error formatted in JSON. It happens when Tarantool can't issue a query.

Here is a description:

 {"error": { "message": STR, "code": INT } }

error - a structured object which contains an internal error message. This field exists only if an internal error occurred, for instance: "too large request", "input json parse error", etc.

If this field exists, the input message was probably not passed to the Tarantool backend.

See "message"/"code" fields for details.

Examples can be found at:

simple_rest_client.py
simple_rest_client.sh

Back to contents

tnt_replace

syntax: tnt_replace [SIZE or off] [FMT]

default: None

context: location, location if

HTTP methods GET, POST, PUT, PATCH, DELETE

Content-Typer default, application/x-www-form-urlencoded

This directive allows executing a replace query with Tarantool.

The first argument is a space id.
The second argument is a format string.

Returns HTTP code 4XX if client's request doesn't well formatted. It means, that this error raised if some of values missed or has wrong type.

Returns HTTP code 5XX if upstream is dead (no ping).

Also it can return an HTTP code 200 with an error formatted in JSON. It happens when Tarantool can't issue a query.

Here is a description:

 {"error": { "message": STR, "code": INT } }

error - a structured object which contains an internal error message. This field exists only if an internal error occurred, for instance: "too large request", "input json parse error", etc.

If this field exists, the input message was probably not passed to the Tarantool backend.

See "message"/"code" fields for details.

Examples can be found at:

examples/simple_rest_client.py
examples/simple_rest_client.sh

Back to contents

tnt_delete

syntax: tnt_delete [SIZE or off] [SIZE or off] [FMT]

default: None

context: location, location if

HTTP methods GET, POST, PUT, PATCH, DELETE

Content-Typer default, application/x-www-form-urlencoded

This directive allows executing a delete query with Tarantool.

The first argument is a space id.
The second argument is an index id.
The third argument is a format string.

Returns HTTP code 4XX if client's request doesn't well formatted. It means, that this error raised if some of values missed or has wrong type.

Returns HTTP code 5XX if upstream is dead (no ping).

Also it can return an HTTP code 200 with an error formatted in JSON. It happens when Tarantool can't issue a query.

Here is a description:

 {"error": { "message": STR, "code": INT } }

error - a structured object which contains an internal error message. This field exists only if an internal error occurred, for instance: "too large request", "input json parse error", etc.

If this field exists, the input message was probably not passed to the Tarantool backend.

See "message"/"code" fields for details.

Examples can be found at:

examples/simple_rest_client.py
examples/simple_rest_client.sh

Back to contents

tnt_select

syntax: tnt_select [SIZE or off] [SIZE or off] [SIZE] [SIZE] [ENUM] [FMT]

default: None

context: location, location if

HTTP methods GET, POST, PUT, PATCH, DELETE

Content-Typer default, application/x-www-form-urlencoded

This directive allows executing a select query with Tarantool.

The first argument is a space id.
The second argument is an index id.
The third argument is an offset.
The fourth argument is an limit.
The fifth argument is an iterator type, allowed values are: eq, req, all, lt ,le,ge, gt, all_set, any_set, all_non_set, overlaps, neighbor.
The six argument is a format string.

Returns HTTP code 4XX if client's request doesn't well formatted. It means, that this error raised if some of values missed or has wrong type.

Returns HTTP code 5XX if upstream is dead (no ping).

Also it can return an HTTP code 200 with an error formatted in JSON. It happens when Tarantool can't issue a query.

Here is a description:

 {"error": { "message": STR, "code": INT } }

error - a structured object which contains an internal error message. This field exists only if an internal error occurred, for instance: "too large request", "input json parse error", etc.

If this field exists, the input message was probably not passed to the Tarantool backend.

See "message"/"code" fields for details.

Examples can be found at:

examples/simple_rest_client.py
examples/simple_rest_client.sh

Back to contents

tnt_select_limit_max

syntax: tnt_select_limit_max [SIZE]

default: 100

context: server, location, location if

HTTP methods GET, POST, PUT, PATCH, DELETE

Content-Typer default, application/x-www-form-urlencoded

This is a constraint to avoid large selects. This is the maximum number of returned tuples per select operation. If the client reaches this limit, then the client gets an error on its side.

Returns HTTP code 4XX if client's request doesn't well formatted. It means, that this error raised if some of values missed or has wrong type.

Returns HTTP code 5XX if upstream is dead (no ping).

Also it can return an HTTP code 200 with an error formatted in JSON. It happens when Tarantool can't issue a query.

Here is a description:

 {"error": { "message": STR, "code": INT } }

error - a structured object which contains an internal error message. This field exists only if an internal error occurred, for instance: "too large request", "input json parse error", etc.

If this field exists, the input message was probably not passed to the Tarantool backend.

See "message"/"code" fields for details.

Examples can be found at:

examples/simple_rest_client.py
examples/simple_rest_client.sh

Back to contents

tnt_allowed_spaces

syntax: tnt_allowed_spaces [STR]

default: **

context: server, location, location if

This is a constraint to prohibit access to some spaces. The directive takes an array of Tarantool space id-s (numbers), and each space in the list is allowed to access from the client side.

Example:

location {
  ...
  tnt_allowed_spaces 512,523;
  tnt_insert off "s=%%space_id,i=%%idx_id";
}

Back to contents

tnt_allowed_indexes

syntax: tnt_allowed_indexes [STR]

default: **

context: server, location, location if

This directive works like [tnt_allowed_spaces], but for indexes.

Back to contents

tnt_update

syntax: tnt_update [SIZE or off] [KEYS] [FMT]

default: None

context: location, location if

HTTP methods GET, POST, PUT, PATCH, DELETE

Content-Typer default, application/x-www-form-urlencoded

This directive allows executing an update query with Tarantool.

The first argument is a space id.
The second argument is a KEYS (for UPDATE) string. it has special request form: [OPERATION_TYPE],[FIELDNO],[VALUE]

Possible OPERATION_TYPE (char) are:
 + for addition (values must be numeric)
 - for subtraction (values must be numeric)
 & for bitwise AND (values must be unsigned numeric)
 | for bitwise OR (values must be unsigned numeric)
 ^ for bitwise XOR (values must be unsigned numeric)
 : for string splice
 ! for insertion
 # for deletion
 = for assignment

FIELDNO (number) -  what field the operation will apply to. The field number can
be negative, meaning the position from the end of tuple. (#tuple + negative field number + 1)

VALUE (int64, float, double, string, boolean) – what value will be applied

More details could be found here [tarantool.org] (https://tarantool.org/en/doc/1.7/book/box/box_space.html?highlight=update#lua-function.space_object.update)

Before go further and start use this feature please read an example for this section [1].

The third argument is a format string.

Examples can be found at:

examples/simple_rest_client.py
examples/simple_rest_client.sh

Returns HTTP code 4XX if client's request doesn't well formatted. It means, that this error raised if some of values missed or has wrong type.

Returns HTTP code 5XX if upstream is dead (no ping).

Also it can return an HTTP code 200 with an error formatted in JSON. It happens when Tarantool can't issue a query.

Here is a description:

 {"error": { "message": STR, "code": INT } }

error - a structured object which contains an internal error message. This field exists only if an internal error occurred, for instance: "too large request", "input json parse error", etc.

If this field exists, the input message was probably not passed to the Tarantool backend.

See "message"/"code" fields for details.

Back to contents

tnt_upsert

syntax: tnt_upsert [SIZE or off] [FMT] [OPERATIONS]

default: None

context: location, location if

HTTP methods GET, POST, PUT, PATCH, DELETE

Content-Typer default, application/x-www-form-urlencoded

This directive allows executing an upsert query with Tarantool.

The first argument is a space id.
The second argument is a format string.
The third argument is a OPERATIONS (for UPSERT) string. it has special request form: [OPERATION_TYPE],[FIELDNO],[VALUE]

Possible OPERATION_TYPE (char) are:
 + for addition (values must be numeric)
 - for subtraction (values must be numeric)
 & for bitwise AND (values must be unsigned numeric)
 | for bitwise OR (values must be unsigned numeric)
 ^ for bitwise XOR (values must be unsigned numeric)
 : for string splice
 ! for insertion
 # for deletion
 = for assignment

FIELDNO (number) -  what field the operation will apply to. The field number can
be negative, meaning the position from the end of tuple. (#tuple + negative field number + 1)

VALUE (int64, float, double, string, boolean) – what value will be applied

More details could be found here [tarantool.org] (https://tarantool.org/en/doc/1.7/book/box/box_space.html?highlight=update#box-space-upsert)

Before go further and start use this feature please read an example for this section [1].

[1] Example

Examples can be found at:

examples/simple_rest_client.py
examples/simple_rest_client.sh

Returns HTTP code 4XX if client's request doesn't well formatted. It means, that this error raised if some of values missed or has wrong type.

Returns HTTP code 5XX if upstream is dead (no ping).

Also it can return an HTTP code 200 with an error formatted in JSON. It happens when Tarantool can't issue a query.

Here is a description:

 {"error": { "message": STR, "code": INT } }

error - a structured object which contains an internal error message. This field exists only if an internal error occurred, for instance: "too large request", "input json parse error", etc.

If this field exists, the input message was probably not passed to the Tarantool backend.

See "message"/"code" fields for details.

Back to contents

Examples

Python test: test/basic_features.py, test/v20_feautres.py, nginx.dev.conf.

Client-side javascript example: example/echo.html, example/echo.lua.

Back to contents

Performance tuning

Use HttpUpstreamKeepaliveModule.
- Use keepalive.
- Use keepalive_requests.
Use multiple instances of Tarantool servers on your multi-core machines.
Turn off unnecessary logging in Tarantool and NginX.
Tune Linux network.
Tune nginx buffers.

Back to contents

Copyright & license

LICENSE

Back to contents

Contacts

Please report bugs at https://github.com/tarantool/nginx_upstream_module/issues.

We also warmly welcome your feedback in the discussion mailing list, [email protected]

Back to contents

Name		Name	Last commit message	Last commit date
Latest commit History 311 Commits
examples		examples
misc		misc
src		src
test		test
third_party		third_party
.gitignore		.gitignore
.gitmodules		.gitmodules
AUTHORS		AUTHORS
Dockerfile		Dockerfile
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
config		config
docker-compose.yml		docker-compose.yml
nginx.conf		nginx.conf
nginx.vh.default.conf		nginx.vh.default.conf
valgrind.suppress		valgrind.suppress

License

tarantool/nginx_upstream_module

Folders and files

Latest commit

History

Repository files navigation

Tarantool NginX upstream module

Limitations

Docker images

Status

Contents

How to install

Build from source

Build via nginx 'configure'

Install on Mac OS X

Configure

Test run and notes for contributors

REST

JSON

Input JSON form

Output JSON form

Example

HTTP headers and status

Directives

tnt_pass

tnt_http_methods

tnt_http_rest_methods

tnt_pass_http_request

tnt_pass_http_request_buffer_size

tnt_method

tnt_set_header

tnt_send_timeout

tnt_read_timeout

tnt_connect_timeout

tnt_buffer_size

tnt_next_upstream

tnt_next_upstream_tries

tnt_next_upstream_timeout

tnt_pure_result

tnt_multireturn_skip_count

Format

tnt_insert

tnt_replace

tnt_delete

tnt_select

tnt_select_limit_max

tnt_allowed_spaces

tnt_allowed_indexes

tnt_update

tnt_upsert

Examples

Performance tuning

Copyright & license

See also

Contacts

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 24

Packages 0

Contributors 15

Languages

Packages