If you are interested in maintaining a fork of this project, please chime in in the dedicated issue.
This Helm chart installs Apache NiFi 1.23.2 in a Kubernetes cluster.
- Kubernetes cluster 1.10+
- Helm 3.0.0+
- Persistent Volumes (PV) provisioner support in the underlying infrastructure.
helm repo add cetic https://cetic.github.io/helm-charts
helm repo updateThe following items can be set via --set flag during installation or configured by editing the values.yaml file directly (need to download the chart first).
- Ingress: The ingress controller must be installed in the Kubernetes cluster.
- ClusterIP: Exposes the service on a cluster-internal IP. Choosing this value makes the service only reachable from within the cluster.
- NodePort: Exposes the service on each Node’s IP at a static port (the NodePort). You’ll be able to contact the NodePort service, from outside the cluster, by requesting
NodeIP:NodePort. - LoadBalancer: Exposes the service externally using a cloud provider’s load balancer.
- Disable(default): The data does not survive the termination of a pod.
- Persistent Volume Claim: Enable persistence so that data survives termination of the pod. There is the choice of using one large persistent volume (using subPath) or seven separate persistent volumes for config, data, logs, repos, etc.
A default
StorageClassis needed in the Kubernetes cluster to dynamically provision the volumes. Specify another StorageClass in thepersistence.storageClasssetting.
- By default, the authentication is a
Single-Userauthentication. You can optionally enableldaporoidcto provide an external authentication. See the configuration section or doc folder for more details.
To add custom processors, the values.yaml file nifi section should contain the following options, where CUSTOM_LIB_FOLDER should be replaced by the path where the libs are:
extraVolumeMounts:
- name: mycustomlibs
mountPath: /opt/configuration_resources/custom_lib
extraVolumes: # this will create the volume from the directory
- name: mycustomlibs
hostPath:
path: "CUSTOM_LIB_FOLDER"
properties:
customLibPath: "/opt/configuration_resources/custom_lib"- You first need monitoring to be enabled which can be accomplished by enabling the appropriate metrics flag (
metrics.prometheus.enabledto true). To enable the creation of prometheus metrics within Nifi we need to create a Reporting Task. Login to the Nifi UI and go to the Hamburger menu on the top right corner, click Controller Settings --> Reporting Tasks After that use the + icon to add a task. Click on the Reporting in the wordcloud on the left and select PrometheusReportingTask --> change Send JVM metrics totrueand click on the play button to enable this task.
If you plan to use Grafana for the visualization of the metrics data the following dashboard is compatible with the exposed metrics.
Install the nifi helm chart with a release name my-release:
helm install my-release cetic/nifiYou will find how to perform an installation from a local clone on this page.
To uninstall/delete the my-release deployment:
helm uninstall my-releaseThe following table lists the configurable parameters of the nifi chart and the default values.
| Parameter | Description | Default |
|---|---|---|
| ReplicaCount | ||
replicaCount |
Number of nifi nodes | 1 |
| Image | ||
image.repository |
nifi Image name | apache/nifi |
image.tag |
nifi Image tag | 1.23.2 |
image.pullPolicy |
nifi Image pull policy | IfNotPresent |
image.pullSecret |
nifi Image pull secret | nil |
| SecurityContext | ||
securityContext.runAsUser |
nifi Docker User | 1000 |
securityContext.fsGroup |
nifi Docker Group | 1000 |
| sts | ||
sts.useHostNetwork |
If true, use the host's network | nil |
sts.serviceAccount.create |
If true, a service account will be created and used by the statefulset | false |
sts.serviceAccount.name |
When set, the set name will be used as the service account name. If a value is not provided a name will be generated based on Chart options | nil |
sts.serviceAccount.annotations |
Service account annotations | {} |
sts.podManagementPolicy |
Parallel podManagementPolicy | Parallel |
sts.AntiAffinity |
Affinity for pod assignment | soft |
sts.pod.annotations |
Pod template annotations | security.alpha.kubernetes.io/sysctls: net.ipv4.ip_local_port_range=10000 65000 |
sts.hostAliases |
Add entries to Pod /etc/hosts | [] |
sts.startupProbe.enabled |
enable Startup Probe on Nifi server container | false |
sts.startupProbe.failureThreshold |
sets Startup Probe failureThreshold field value | 60 |
sts.startupProbe.periodSeconds |
sets Startup Probe periodSeconds field value | 10 |
| secrets | ||
secrets |
Pass any secrets to the nifi pods. The secret can also be mounted to a specific path if required. | nil |
| configmaps | ||
configmaps |
Pass any configmaps to the nifi pods. The configmap can also be mounted to a specific path if required. | nil |
| nifi properties | ||
properties.algorithm |
Encryption method | NIFI_PBKDF2_AES_GCM_256 |
properties.sensitiveKey |
Encryption password (at least 12 characters) | changeMechangeMe |
properties.sensitiveKeySetFile |
Update Sensitive Properties Key if this file does not exist, and then create it. | nil |
properties.sensitiveKeyPrior |
Prior sensitiveKey when updating via sensitiveKeySetFile mechanism |
nil |
properties.externalSecure |
externalSecure for when inbound SSL | false |
properties.isNode |
cluster node properties (only configure for cluster nodes) | false |
properties.httpPort |
web properties HTTP port | 8080 |
properties.httpsPort |
web properties HTTPS port | null |
properties.clusterPort |
cluster node port | 6007 |
properties.clusterNodeConnectionTimeout |
cluster node connection timeout | 5 sec |
properties.clusterNodeReadTimeout |
cluster node read timeout | 5 sec |
properties.zookeeperConnectTimeout |
zookeeper connect timeout | 3 secs |
properties.zookeeperSessionTimeout |
zookeeper session timeout | 3 secs |
properties.archiveMaxRetentionPeriod |
nifi content repository archive max retention period | 3 days |
properties.archiveMaxUsagePercentage |
nifi content repository archive max usage | 85% |
properties.provenanceStorage |
nifi provenance repository max storage size | 8 GB |
properties.provenanceMaxStorageTime |
nifi provenance repository max storage time | 10 days |
properties.flowArchiveMaxTime |
nifi flow archive max time | 30 days |
properties.flowArchiveMaxStorage |
nifi flow archive max storage | 500 MB |
properties.siteToSite.secure |
Site to Site properties Secure mode | false |
properties.siteToSite.port |
Site to Site properties Secure port | 10000 |
properties.safetyValve |
Map of explicit 'property: value' pairs that overwrite other configuration | nil |
properties.customLibPath |
Path of the custom libraries folder | nil |
properties.webProxyHost |
Proxy to access to Nifi through the cluster ip address | Port:30236 |
| Authentication | ||
| Single-user authentication | Automatically disabled if Client Certificate, OIDC, or LDAP enabled | |
auth. admin |
Default admin identity. It will overwrite the LDAP Bind DN for this purpose, when both is filled | CN=admin, OU=NIFI |
auth.singleUser.username |
Single user identity | username |
auth.singleUser.password |
Single user password | changemechangeme |
| Client Certificate authentication | ||
auth.clientAuth.enabled |
Enable User auth via Client Certificates | false |
| Ldap authentication | ||
auth.ldap.admin |
Default admin identity and LDAP Bind DN | |
auth.ldap.enabled |
Enable User auth via ldap | false |
auth.ldap.host |
ldap hostname | ldap://<hostname>:<port> |
auth.ldap.searchBase |
ldap searchBase | CN=Users,DC=example,DC=com |
auth.ldap.searchFilter |
ldap searchFilter | CN=john |
auth.ldap.userSearchScope |
ldap userSearchScope | ONE_LEVEL |
auth.ldap.groupSearchScope |
ldap groupSearchScope | ONE_LEVEL |
| Oidc authentication | ||
auth.oidc.enabled |
Enable User auth via oidc | false |
auth.oidc.discoveryUrl |
oidc discover url | https://<provider>/.well-known/openid-configuration |
auth.oidc.clientId |
oidc clientId | nil |
auth.oidc.clientSecret |
oidc clientSecret | nil |
auth.oidc.claimIdentifyingUser |
oidc claimIdentifyingUser | email |
auth.oidc.preferredJwsAlgorithm |
The preferred algorithm for validating identity tokens. If this value is blank, it will default to RS256 which is required to be supported by the OpenID Connect Provider according to the specification. If this value is HS256, HS384, or HS512, NiFi will attempt to validate HMAC protected tokens using the specified client secret. If this value is none, NiFi will attempt to validate unsecured/plain tokens. | nil |
auth.oidc.admin |
Default OIDC admin identity | [email protected] |
| Note that OIDC authentication to a multi-NiFi-node cluster requires Ingress sticky sessions | See background | Also how |
| postStart | ||
postStart |
Include additional libraries in the Nifi containers by using the postStart handler | nil |
| Headless Service | ||
headless.type |
Type of the headless service for nifi | ClusterIP |
headless.annotations |
Headless Service annotations | service.alpha.kubernetes.io/tolerate-unready-endpoints: "true" |
| UI Service | ||
service.type |
Type of the UI service for nifi | NodePort |
service.httpPort |
Port to expose service | 8080 |
service.httpsPort |
Port to expose service in tls | 443 |
service.annotations |
Service annotations | {} |
service.loadBalancerIP |
LoadBalancerIP if service type is LoadBalancer |
nil |
service.loadBalancerSourceRanges |
Address that are allowed when svc is LoadBalancer |
[] |
service.processors.enabled |
Enables additional port/ports to nifi service for internal processors | false |
service.processors.ports |
Specify "name/port/targetPort/nodePort" for processors sockets | [] |
| ContainerPorts | ||
containerPorts |
Additional containerPorts for the nifi-container. Example is given in values.yaml | [] |
| Ingress | ||
ingress.enabled |
Enables Ingress | false |
ingress.className |
Ingress controller Class | nginx |
ingress.annotations |
Ingress annotations | {} |
ingress.path |
Path to access frontend (See issue #22) | / |
ingress.hosts |
Ingress hosts | [] |
ingress.tls |
Ingress TLS configuration | [] |
| Persistence | ||
persistence.enabled |
Use persistent volume to store data | false |
persistence.storageClass |
Storage class name of PVCs (use the default type if unset) | nil |
persistence.accessMode |
ReadWriteOnce or ReadOnly | [ReadWriteOnce] |
persistence.subPath.enabled |
Use only one persistent volume with subPath instead of seven separate persistent volumes | false |
persistence.subPath.name |
Name of the one persistent volume claim when using subPath | data |
persistence.subPath.size |
Size of the one persistent volume claim when using subPath | 36Gi |
persistence.configStorage.size |
Size of persistent volume claim | 100Mi |
persistence.authconfStorage.size |
Size of persistent volume claim | 100Mi |
persistence.dataStorage.size |
Size of persistent volume claim | 1Gi |
persistence.flowfileRepoStorage.size |
Size of persistent volume claim | 10Gi |
persistence.contentRepoStorage.size |
Size of persistent volume claim | 10Gi |
persistence.provenanceRepoStorage.size |
Size of persistent volume claim | 10Gi |
persistence.logStorage.size |
Size of persistent volume claim | 5Gi |
| jvmMemory | ||
jvmMemory |
bootstrap jvm size | 2g |
| SideCar | ||
sidecar.image |
Separate image for tailing each log separately and checking zookeeper connectivity | busybox |
sidecar.tag |
Image tag | 1.32.0 |
sidecar.imagePullPolicy |
Image imagePullPolicy | IfNotPresent |
| Resources | ||
resources |
Pod resource requests and limits for logs | {} |
| logResources | ||
logresources. |
Pod resource requests and limits | {} |
| affinity | ||
affinity |
Pod affinity scheduling rules | {} |
| nodeSelector | ||
nodeSelector |
Node labels for pod assignment | {} |
| terminationGracePeriodSeconds | ||
terminationGracePeriodSeconds |
Number of seconds the pod needs to terminate gracefully. For clean scale down of the nifi-cluster the default is set to 60, opposed to k8s-default 30. | 60 |
| tolerations | ||
tolerations |
Tolerations for pod assignment | [] |
| initContainers | ||
initContainers |
Container definition that will be added to the pod as initContainers | [] |
| extraVolumes | ||
extraVolumes |
Additional Volumes available within the pod (see spec for format) | [] |
| extraVolumeMounts | ||
extraVolumeMounts |
VolumeMounts for the nifi-server container (see spec for details) | [] |
| env | ||
env |
Additional environment variables for the nifi-container (see spec for details) | [] |
envFrom |
Additional environment variables for the nifi-container from config-maps or secrets (see spec for details) | [] |
| extraOptions | ||
extraOptions |
Additional bootstrap.conf properties (see properties for details) | [] |
| extraContainers | ||
extraContainers |
Additional container-specifications that should run within the pod (see spec for details) | [] |
| extraLabels | ||
extraLabels |
Additional labels for the nifi pod | nil |
| openshift | ||
openshift.scc.enabled |
If true, a openshift security context will be created permitting to run the statefulset as AnyUID | false |
openshift.route.enabled |
If true, a openshift route will be created. This option cannot be used together with Ingress as a route object replaces the Ingress. The property properties.externalSecure will configure the route in edge termination mode, the default is passthrough. The property properties.httpsPort has to be set if the cluster is intended to work with SSL termination |
false |
openshift.route.host |
The hostname intended to be used in order to access NiFi web interface | nil |
openshift.route.path |
Path to access frontend, works the same way as the ingress path option | nil |
| zookeeper | ||
zookeeper.enabled |
If true, deploy Zookeeper | true |
zookeeper.url |
If the Zookeeper Chart is disabled a URL and port are required to connect | nil |
zookeeper.port |
If the Zookeeper Chart is disabled a URL and port are required to connect | 2181 |
| registry | ||
registry.enabled |
If true, deploy Nifi Registry | false |
registry.url |
If the Nifi Registry Chart is disabled a URL and port are required to connect | nil |
registry.port |
If the Nifi Registry Chart is disabled a URL and port are required to connect | 80 |
| ca | ||
ca.enabled |
If true, deploy Nifi Toolkit as CA | false |
ca.server |
CA server dns name | nil |
ca.port |
CA server port number | 9090 |
ca.token |
The token to use to prevent MITM | 80 |
ca.admin.cn |
CN for admin certificate | admin |
ca.serviceAccount.create |
If true, a service account will be created and used by the deployment | false |
ca.serviceAccount.name |
When set, the set name will be used as the service account name. If a value is not provided a name will be generated based on Chart options | nil |
ca.openshift.scc.enabled |
If true, an openshift security context will be created permitting to run the deployment as AnyUID | false |
| certManager | ||
certManager.enabled |
If true, use cert-manager to create and rotate intra-NiFi-cluster TLS keys (note that cert-manager is a Kubernetes cluster-wide resource, so is not installed automatically by this chart) | false |
certManager.clusterDomain |
Kubernetes cluster top level domain, to generate fully qualified domain names for certificate Common Names | cluster.local |
certManager.keystorePasswd |
Java Key Store password for NiFi keystore | changeme |
certManager.truststorePasswd |
Java Key Store password for NiFi truststore | changeme |
certManager.additionalDnsNames |
Additional DNS names to incorporate into TLS certificates (e.g. where users point browsers to access the NiFi UI) | [ localhost ] |
certManager.caSecrets |
Names of Kubernetes secrets containing ca.crt keys to add to the NiFi truststore |
[ ] |
certManager.refreshSeconds |
How often the sidecar refreshes the NiFi keystore (not truststore) from the cert-manager Kubernetes secrets | 300 |
certManager.resources |
Memory and CPU resources for the node certificate refresh sidecar | 100m CPU, 128MiB RAM |
certManager.replaceDefaultTrustStore |
Use the certManager truststore, not the default Java trusted CA collection (for [e.g.] private OIDC provider) | false |
certManager.certDuration |
NiFi node certificate lifetime (90 days) | 2160h |
certManager.caDuration |
Certificate Authority certificate lifetime (10 years) | 87660h |
| metrics | ||
metrics.prometheus.enabled |
Enable prometheus to access nifi metrics endpoint | false |
metrics.prometheus.port |
Port where Nifi server will expose Prometheus metrics | 9092 |
metrics.prometheus.serviceMonitor.enabled |
If true, creates a Prometheus Operator ServiceMonitor (also requires metrics.prometheus.enabled to be true) |
false |
metrics.prometheus.serviceMonitor.namespace |
In which namespace the ServiceMonitor should be created | |
metrics.prometheus.serviceMonitor.labels |
Additional labels for the ServiceMonitor | nil |
| customFlow | ||
customFlow |
Use this file (uncompressed XML; possibly from a configmap) as the Flow definition | nil |
Before filing a bug report, you may want to:
- check the FAQ
- check that persistent storage is configured on your cluster
- keep in mind that a first installation may take a significant amount of time on a home internet connection
- check if a pod is in error:
kubectl get pod
NAME READY STATUS RESTARTS AGE
myrelease-nifi-0 3/4 Failed 1 56m
myrelease-nifi-registry-0 1/1 Running 0 56m
myrelease-nifi-zookeeper-0 1/1 Running 0 56m
myrelease-nifi-zookeeper-1 1/1 Running 0 56m
myrelease-nifi-zookeeper-2 1/1 Running 0 56mInspect the pod, check the "Events" section at the end for anything suspicious.
kubectl describe pod myrelease-nifi-0Get logs on a failed container inside the pod (here the server one):
kubectl logs myrelease-nifi-0 serverInitially inspired from https://github.com/YolandaMDavis/apache-nifi.
TLS work/inspiration from https://github.com/sushilkm/nifi-chart.git.
Feel free to contribute by making a pull request.
Please read the official Helm Contribution Guide from Helm for more information on how you can contribute to this Chart.