[ACCTON][AS4630-54NPE] Add new platform #1006
Open
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
CPU: Intel C3558 2.2GHz 4 Core
DDR4 SDRAM: 8GB 2133MHz with ECC (SO-DIMM) DDR4 *2
SPI Flash (Boot): 128Mb *2
M.2 SSD: SATA 32GB/64GB SSD (2280)
CPLD: Altera MAX V 5M2210
TPM: ST33ZP24AR28PVSP, ST
Management
UART RS232 console port (RJ45),
88E1512, Marvell, Out-band Management Ethernet port (RJ45)
MAC
Broadcom Trident3 BCM56370 *1
560Gbs Enterprise switch with Multigigabit Ethernet Ports
PHY
BCM54998E*5
Octal-Port 2.5GBASE-T/1000BASET/100BASE-TX Transceiver
BCM84894 *3
10GBASE-T/5GBASE-T/2.5GBASET/1000BASE-T/100BASE-TX Transceiver
PoE
STM32F100C8T6BTR*1, PoE MCU
BCM59131 *12, PSE Controller
SATA CONN
M.2 connector
Ethernet Ports
36 x 2.5G Base-T + 12 x 10G Base-T + 4 x 25G SFP28+ 2 x 100G QSFP28
Power Supply
1200W/920W PSU, 3Y, 1+1 redundant load-sharing, hot-swappable
Cooling
F2B fan-tray modules with 3 pcs of 40mmx40mmx56mm 12V fans, hot-swappable