BlackIP

English | Español

BlackIP is a project that collects and unifies public blocklists of IP addresses, to make them compatible with Squid and IPSET (Iptables Netfilter).

DATA SHEET

ACL	Blocked IP	File Size
blackip.txt	438428	6,2 Mb

GIT CLONE

git clone --depth=1 https://github.com/maravento/blackip.git

HOW TO USE

blackip.txt is already optimized. Download it and unzip it in the path of your preference.

Download

wget -q -N https://raw.githubusercontent.com/maravento/blackip/master/blackip.tar.gz && cat blackip.tar.gz* | tar xzf -

Optional: Checksum

wget -q -N https://raw.githubusercontent.com/maravento/blackip/master/checksum.md5
md5sum blackip.txt | awk '{print $1}' && cat checksum.md5 | awk '{print $1}'

Important about BlackIP

Should not be used blackip.txt in IPSET and in Squid at the same time (double filtrate).
blackip.txt is a list IPv4. Does not include CIDR.

Ipset/Iptables Rules

Edit your Iptables bash script and add the following lines (run with root privileges):

#!/bin/bash
# https://linux.die.net/man/8/ipset
# variables
ipset=/sbin/ipset
iptables=/sbin/iptables

# Replace with your path to blackip.txt
ips=/path_to_lst/blackip.txt

# ipset rules
$ipset -L blackip >/dev/null 2>&1
if [ $? -ne 0 ]; then
        echo "set blackip does not exist. create set..."
        $ipset -! create blackip hash:net family inet hashsize 1024 maxelem 10000000
    else
        echo "set blackip exist. flush set..."
        $ipset -! flush blackip
fi
$ipset -! save > /tmp/ipset_blackip.txt
# read file and sort (v8.32 or later)
cat $ips | sort -V -u | while read line; do
    # optional: if there are commented lines
    if [ "${line:0:1}" = "#" ]; then
        continue
    fi
    # adding IPv4 addresses to the tmp list
    echo "add blackip $line" >> /tmp/ipset_blackip.txt
done
# adding the tmp list of IPv4 addresses to the blackip set of ipset
$ipset -! restore < /tmp/ipset_blackip.txt

# iptables rules
$iptables -t mangle -I PREROUTING -m set --match-set blackip src,dst -j DROP
$iptables -I INPUT -m set --match-set blackip src,dst -j DROP
$iptables -I FORWARD -m set --match-set blackip src,dst -j DROP
echo "done"

Ipset/Iptables Rules with IPDeny (Optional)

You can add the following lines to the bash above to include full country IP ranges with IPDeny adding the countries of your choice.

# Put these lines at the end of the "variables" section
# Replace with your path to zones folder
zones=/path_to_folder/zones
# download zones
if [ ! -d $zones ]; then mkdir -p $zones; fi
wget -q -N http://www.ipdeny.com/ipblocks/data/countries/all-zones.tar.gz
tar -C $zones -zxvf all-zones.tar.gz >/dev/null 2>&1
rm -f all-zones.tar.gz >/dev/null 2>&1

# replace the line:
cat $ips | sort -V -u | while read line; do
# with (e.g: Russia and China):
cat $zones/{cn,ru}.zone $ips | sort -V -u | while read line; do

About Ipset/Iptables Rules

Ipset allows mass filtering, at a much higher processing speed than other solutions (check benchmark).
Blackip is a list containing millions of IPv4 lines and to be supported by Ipset, we had to arbitrarily increase the parameter maxelem (for more information, check ipset's hashsize and maxelem parameters).
Ipset/iptables limitation: "When entries added by the SET target of iptables/ip6tables, then the hash size is fixed and the set won't be duplicated, even if the new entry cannot be added to the set" (for more information, check Man Ipset).
Heavy use of these rules can slow down your PC to the point of crashing. Use them at your own risk.
Tested on iptables v1.8.7, ipset v7.15, protocol version: 7.

Squid Rule

Edit:

/etc/squid/squid.conf

And add the following lines:

# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS

# Block Rule for BlackIP
acl blackip dst "/path_to/blackip.txt"
http_access deny blackip

About Squid Rule

blackip.txt has been tested in Squid v3.5.x and later.

Advanced Rules

BlackIP contains millions of IP addresses, therefore it is recommended:

Use blackcidr.txt to add IP/CIDR that are not included in blackip.txt (By default it contains some Block CIDR).
Use allowip.txt (a whitelist of IPv4 IP addresses such as Hotmail, Gmail, Yahoo. etc.).
Use aipextra.txt to add whitelists of IP/CIDRs that are not included in allowip.txt.
By default, blackip.txt excludes some private or reserved ranges RFC1918. Use IANA (iana.txt) to exclude them all.
By default, blackip.txt excludes some DNS servers included in dns.txt. You can use this list and expand it to deny or allow DNS servers.
To increase security, close Squid to any other request to IP addresses with ZTR.

### INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS ###

# Allow Rule for IP
acl allowip dst "/path_to/allowip.txt"
http_access allow allowip

# Allow Rule for IP/CIDR ACL (not included in allowip.txt)
acl aipextra dst "/path_to/aipextra.txt"
http_access allow aipextra

# Allow Rule for IANA ACL (not included in allowip.txt)
acl iana dst "/path_to/iana.txt"
http_access allow iana

# Allow Rule for DNS ACL (excluded from blackip.txt)
acl dnslst dst "/path_to/dns.txt"
http_access allow dnslst # or deny dnlst

# Block Rule for IP/CIDR ACL (not included in blackip.txt)
acl blackcidr dst "/path_to/blackcidr.txt"
http_access deny blackcidr

## Block Rule for BlackIP
acl blackip dst "/path_to/blackip.txt"
http_access deny blackip

## Zero Trust Rule (ZTR)
acl no_ip url_regex -i [0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}
http_access deny no_ip

BLACKIP UPDATE

⚠️ WARNING: BEFORE YOU CONTINUE

This section is only to explain how update and optimization process works. It is not necessary for user to run it. This process can take time and consume a lot of hardware and bandwidth resources, therefore it is recommended to use test equipment.

Bash Update

The update process of blackip.txt is executed in sequence by the script bipupdate.sh. The script will request privileges when required.

wget -q -N https://raw.githubusercontent.com/maravento/blackip/master/bipupdate/bipupdate.sh && chmod +x bipupdate.sh && ./bipupdate.sh

Dependencies

Update requires python 3x and bash 5x.

pkgs='wget git curl idn2 perl tar rar unrar unzip zip python-is-python3 ipset'
if ! dpkg -s $pkgs >/dev/null 2>&1; then
  apt -y install $pkgs
fi

Make sure your Squid is installed correctly. If you have any problems, run the following script: (sudo ./squid_install.sh):

#!/bin/bash

# kill old version
while pgrep squid > /dev/null; do
    echo "Waiting for Squid to stop..."
    killall -s SIGTERM squid &>/dev/null
    sleep 5
done

# squid remove (if exist)
apt purge -y squid- &>/dev/null
rm -rf /var/spool/squid- /var/log/squid- /etc/squid- /dev/shm/- &>/dev/null

# squid install (you can use 'squid-openssl' or 'squid')
apt install -y squid-openssl squid-langpack squid-common squidclient squid-purge

# create log
if [ ! -d /var/log/squid ]; then
    mkdir -p /var/log/squid
fi &>/dev/null
if [[ ! -f /var/log/squid/{access,cache,store,deny}.log ]]; then
    touch /var/log/squid/{access,cache,store,deny}.log
fi &>/dev/null

# permissions
chown -R proxy:proxy /var/log/squid

# enable service
systemctl enable squid.service
systemctl start squid.service
echo "Done"

Capture Public Blocklists

Capture IPv4 from downloaded public blocklists (see SOURCES) and unifies them in a single file.

DNS Loockup

Most of the SOURCES contain millions of invalid and nonexistent IP. Then, a double check of each IP is done (in 2 steps) via DNS and invalid and nonexistent are excluded from Blackip. This process may take. By default it processes in parallel ≈ 6k to 12k x min, depending on the hardware and bandwidth.

HIT 8.8.8.8
Host 8.8.8.8.in-addr.arpa domain name pointer dns.google
FAULT 0.0.9.1
Host 1.9.0.0.in-addr.arpa. not found: 3(NXDOMAIN)

Run Squid-Cache with BlackIP

Run Squid-Cache with BlackIP and any error sends it to SquidError.txt on your desktop.

Check execution (/var/log/syslog)

BlackIP: Done 02/02/2024 15:47:14

Important about BlackIP Update

tw.txt containing IPs of teamviewer servers. By default they are commented. To block or authorize them, activate them in bipupdate.sh. To update it use tw.sh.
You must activate the rules in Squid before using bipupdate.sh.
Some lists have download restrictions, so do not run bipupdate.sh more than once a day.
During the execution of bipupdate.sh it will request privileges when needed.
If you use aufs, temporarily change it to ufs during the upgrade, to avoid: ERROR: Can't change type of existing cache_dir aufs /var/spool/squid to ufs. Restart required.
If someone considers that a domain should not be on Blackip, they can create an Issue and notify it to remove it.

AllowIP Update

allowip.txt is already updated and optimized. The update process of allowip.txt is executed in sequence by the script aipupdate.sh.

wget -q -N https://raw.githubusercontent.com/maravento/blackip/master/bipupdate/wlst/aipupdate.sh && chmod +x aipupdate.sh && ./aipupdate.sh

SOURCES

BLOCKLISTS

Active

Inactive, Offline, Discontinued or Private

DEBUG LISTS

WORKTOOLS

STARGAZERS

CONTRIBUTIONS

We thank all those who contributed to this project. Those interested may contribute sending us new "Blocklist" links to be included in this project.

Special thanks to: Jhonatan Sneider

SPONSOR THIS PROJECT

LICENSES

DISCLAIMER

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

OBJECTION

Due to recent arbitrary changes in computer terminology, it is necessary to clarify the meaning and connotation of the term blacklist, associated with this project:

In computing, a blacklist, denylist or blocklist is a basic access control mechanism that allows through all elements (email addresses, users, passwords, URLs, IP addresses, domain names, file hashes, etc.), except those explicitly mentioned. Those items on the list are denied access. The opposite is a whitelist, which means only items on the list are let through whatever gate is being used. Source Wikipedia

Therefore, blacklist, blocklist, blackweb, blackip, whitelist and similar, are terms that have nothing to do with racial discrimination.

Name		Name	Last commit message	Last commit date
Latest commit History 152 Commits
bipupdate		bipupdate
README-es.md		README-es.md
README.md		README.md
blackip.tar.gz		blackip.tar.gz
checksum.md5		checksum.md5

maravento/blackip

Folders and files

Latest commit

History

Repository files navigation