This contains some customizations I have done for my own use (Xiaomi Dafang camera):
- hostname is automatically set based on MAC address
- hostname is used as the device name for MQTT
- swap enabled by default
- camera performs motor calibration on boot
- alarm functionality controllable via MQTT
This repository contains custom firmwares for the following devices:
| Name | Picture |
|---|---|
| Xiaomi Dafang |  |
| Xiaomi Xiaofang 1S |  |
| Wyzecam Pan | |
| Wyzecam V2 | |
| Neos SmartCam (NB The original firmware is not yet available, proceed with caution!) | |
| Sannce I21AG, MixSight HX-I2110T2, WanScam HW0036, Escam G02, Digoo BB-M2 |  |
| Any other Device with Ingenic T10/T20 Device |  |
If you have a classic XiaoFang with a ARM-Processor, consider using https://github.com/samtap/fang-hacks
Attentention: Do not install the latest Firmware on your Device. It will disable the support of this hack.
Further information about this topic can be found here: EliasKotlyar#669
Before you try to install it, please read the FAQ
After that, continue to the Installation
If you encounter a problem, please see first if you find similiar open/closed issues. Or ask in our Gitter channel for help.
If you don't find anything related, feel free to open a new issue. If you/we solve your issue, please condense your gained insights into a pull request for continuous self-improvement.
We are really excited to announce that we have now a open source partner community, which provides a lot of content about the T10/T20/T30 Devices
Start here for more informations: http://bbs.ebaina.com/thread-53811-1-1.html
欢迎来到这个存储库亲爱的朋友们。 从这里开始，获取关于在您的设备上获取此hack的教程：开始
Start here
It is possible to run your own scripts on motion detection. See here
Any contribution to the development is highly welcome. Simply open a pull request on GitHub.