Khadas vims 4.9.y #15
Open
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
numbqq
pushed a commit
that referenced
this pull request
Aug 20, 2020
…up_skb [ Upstream commit 394de11 ] The packets from tunnel devices (eg bareudp) may have only metadata in the dst pointer of skb. Hence a pointer check of neigh_lookup is needed in dst_neigh_lookup_skb Kernel crashes when packets from bareudp device is processed in the kernel neighbour subsytem. [ 133.384484] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 133.385240] #PF: supervisor instruction fetch in kernel mode [ 133.385828] #PF: error_code(0x0010) - not-present page [ 133.386603] PGD 0 P4D 0 [ 133.386875] Oops: 0010 [#1] SMP PTI [ 133.387275] CPU: 0 PID: 5045 Comm: ping Tainted: G W 5.8.0-rc2+ #15 [ 133.388052] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 133.391076] RIP: 0010:0x0 [ 133.392401] Code: Bad RIP value. [ 133.394029] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.396656] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.399018] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.399685] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.400350] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.401010] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.401667] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.402412] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.402948] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.403611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.404270] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.404933] Call Trace: [ 133.405169] <IRQ> [ 133.405367] __neigh_update+0x5a4/0x8f0 [ 133.405734] arp_process+0x294/0x820 [ 133.406076] ? __netif_receive_skb_core+0x866/0xe70 [ 133.406557] arp_rcv+0x129/0x1c0 [ 133.406882] __netif_receive_skb_one_core+0x95/0xb0 [ 133.407340] process_backlog+0xa7/0x150 [ 133.407705] net_rx_action+0x2af/0x420 [ 133.408457] __do_softirq+0xda/0x2a8 [ 133.408813] asm_call_on_stack+0x12/0x20 [ 133.409290] </IRQ> [ 133.409519] do_softirq_own_stack+0x39/0x50 [ 133.410036] do_softirq+0x50/0x60 [ 133.410401] __local_bh_enable_ip+0x50/0x60 [ 133.410871] ip_finish_output2+0x195/0x530 [ 133.411288] ip_output+0x72/0xf0 [ 133.411673] ? __ip_finish_output+0x1f0/0x1f0 [ 133.412122] ip_send_skb+0x15/0x40 [ 133.412471] raw_sendmsg+0x853/0xab0 [ 133.412855] ? insert_pfn+0xfe/0x270 [ 133.413827] ? vvar_fault+0xec/0x190 [ 133.414772] sock_sendmsg+0x57/0x80 [ 133.415685] __sys_sendto+0xdc/0x160 [ 133.416605] ? syscall_trace_enter+0x1d4/0x2b0 [ 133.417679] ? __audit_syscall_exit+0x1d9/0x280 [ 133.418753] ? __prepare_exit_to_usermode+0x5d/0x1a0 [ 133.419819] __x64_sys_sendto+0x24/0x30 [ 133.420848] do_syscall_64+0x4d/0x90 [ 133.421768] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 133.422833] RIP: 0033:0x7fe013689c03 [ 133.423749] Code: Bad RIP value. [ 133.424624] RSP: 002b:00007ffc7288f418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 133.425940] RAX: ffffffffffffffda RBX: 000056151fc63720 RCX: 00007fe013689c03 [ 133.427225] RDX: 0000000000000040 RSI: 000056151fc63720 RDI: 0000000000000003 [ 133.428481] RBP: 00007ffc72890b30 R08: 000056151fc60500 R09: 0000000000000010 [ 133.429757] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 [ 133.431041] R13: 000056151fc636e0 R14: 000056151fc616bc R15: 0000000000000080 [ 133.432481] Modules linked in: mpls_iptunnel act_mirred act_tunnel_key cls_flower sch_ingress veth mpls_router ip_tunnel bareudp ip6_udp_tunnel udp_tunnel macsec udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc xt_MASQUERADE iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc ebtable_filter ebtables overlay ip6table_filter ip6_tables iptable_filter sunrpc ext4 mbcache jbd2 pcspkr i2c_piix4 virtio_balloon joydev ip_tables xfs libcrc32c ata_generic qxl pata_acpi drm_ttm_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ata_piix libata virtio_net net_failover virtio_console failover virtio_blk i2c_core virtio_pci virtio_ring serio_raw floppy virtio dm_mirror dm_region_hash dm_log dm_mod [ 133.444045] CR2: 0000000000000000 [ 133.445082] ---[ end trace f4aeee1958fd1638 ]--- [ 133.446236] RIP: 0010:0x0 [ 133.447180] Code: Bad RIP value. [ 133.448152] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.449363] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.450835] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.452237] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.453722] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.455149] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.456520] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.458046] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.459342] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.460782] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.462240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.463697] Kernel panic - not syncing: Fatal exception in interrupt [ 133.465226] Kernel Offset: 0xfa00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 133.467025] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: aaa0c23 ("Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug") Signed-off-by: Martin Varghese <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit d367cb9 upstream. The "end" pointer is either NULL or it points to the next byte to parse. If there isn't a next byte then dereferencing "end" is an off-by-one out of bounds error. And, of course, if it's NULL that leads to an Oops. Printing "*end" doesn't seem very useful so let's delete this code. Also for the last debug statement, I noticed that it should be printing "sequence_end" instead of "end" so fix that as well. Reported-by: Dominik Maier <[email protected]> Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
…pages commit e895056 upstream. Call kvm_mmu_commit_zap_page() after exiting the "prepare zap" loop in kvm_recover_nx_lpages() to finish zapping pages in the unlikely event that the loop exited due to lpage_disallowed_mmu_pages being empty. Because the recovery thread drops mmu_lock() when rescheduling, it's possible that lpage_disallowed_mmu_pages could be emptied by a different thread without to_zap reaching zero despite to_zap being derived from the number of disallowed lpages. Fixes: 1aa9b95 ("kvm: x86: mmu: Recovery of shattered NX large pages") Cc: Junaid Shahid <[email protected]> Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 60386b8 upstream. Errors returned by crypto_shash_update() are not checked in ima_calc_boot_aggregate_tfm() and thus can be overwritten at the next iteration of the loop. This patch adds a check after calling crypto_shash_update() and returns immediately if the result is not zero. Cc: [email protected] Fixes: 3323eec ("integrity: IMA as an integrity service provider") Signed-off-by: Roberto Sassu <[email protected]> Signed-off-by: Mimi Zohar <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit cbdad1f upstream. The async path cannot use MAY_BACKLOG because it is not meant to block, which is what MAY_BACKLOG does. On the other hand, both the sync and async paths can make use of MAY_SLEEP. Fixes: 83094e5 ("crypto: af_alg - add async support to...") Cc: <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 857a313 ] When pci_get_device_func() fails, the driver doesn't need to execute pci_dev_put(). mci should still be freed, though, to prevent a memory leak. When pci_enable_device() fails, the error injection PCI device "einj" doesn't need to be disabled either. [ bp: Massage commit message, rename label to "bail_mc_free". ] Fixes: 52608ba ("i5100_edac: probe for device 19 function 0") Signed-off-by: Dinghao Liu <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit f7ade9a ] Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()', in 'setup_crypt_desc()'. Fixes: 81bef01 ("crypto: ixp4xx - Hardware crypto support for IXP4xx CPUs") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
…_state()" [ Upstream commit 00d21f3 ] The "idle" pinctrl state is optional as documented in the DT binding. The change introduced by the commit being reverted makes that pinctrl state mandatory and breaks initialization of the whole media driver, since the "idle" state is not specified in any mainline dts. This reverts commit 18ffec7 ("media: exynos4-is: Add missed check for pinctrl_lookup_state()") to fix the regression. Fixes: 18ffec7 ("media: exynos4-is: Add missed check for pinctrl_lookup_state()") Signed-off-by: Sylwester Nawrocki <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 52438c4 ] clang static analysis reports this error m5mols_core.c:767:4: warning: Called function pointer is null (null dereference) [core.CallAndMessage] info->set_power(&client->dev, 0); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In other places, the set_power ptr is checked. So add a check. Fixes: bc12510 ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP") Signed-off-by: Tom Rix <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d8fc21c ] When devm_ioremap_resource() fails, isp should be freed just like other error paths in isp_probe. Fixes: 8644cdf ("[media] omap3isp: Replace many MMIO regions by two") Signed-off-by: Dinghao Liu <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 3faf757 ] Running export/import for hashes in peculiar order (mostly done by openssl) can mess up the internal book keeping of the OMAP SHA core. Fix by forcibly writing the correct DIGCNT back to hardware. This issue was noticed while transitioning to openssl 1.1 support. Fixes: 0d373d6 ("crypto: omap-sham - Add OMAP4/AM33XX SHAM Support") Signed-off-by: Tero Kristo <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 274cf92 ] clang static analysis flags this error tc358743.c:1468:9: warning: Branch condition evaluates to a garbage value return handled ? IRQ_HANDLED : IRQ_NONE; ^~~~~~~ handled should be initialized to false. Fixes: d747b80 ("[media] tc358743: add direct interrupt handling") Signed-off-by: Tom Rix <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 63e36a3 ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails. Fixes: 6eaafbd ("[media] v4l: rcar-fcp: Keep the coding style consistent") Signed-off-by: Qiushi Wu <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 7dae2aa ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. And also, when the call of function vpe_runtime_get() failed, we won't call vpe_runtime_put(). Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails inside vpe_runtime_get(). Fixes: 4571912 ("[media] v4l: ti-vpe: Add VPE mem to mem driver") Signed-off-by: Qiushi Wu <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit aea6cb9 ] When creating a new regulator its supply cannot create the sysfs link because the device is not yet published. Remove early supply resolving since it will be done later anyway. This makes the following error disappear and the symlinks get created instead. DCDC_REG1: supplied by VSYS VSYS: could not add device link regulator.3 err -2 Note: It doesn't fix the problem for bypassed regulators, though. Fixes: 45389c4 ("regulator: core: Add early supply resolution for regulators") Signed-off-by: Michał Mirosław <[email protected]> Link: https://lore.kernel.org/r/ba09e0a8617ffeeb25cb4affffe6f3149319cef8.1601155770.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 720e5c0 ] It is expected that the returned counters by .get_survey are monotonic increasing. But the data from ath10k gets reset to zero regularly. Channel active/busy time are then showing incorrect values (less than previous or sometimes zero) for the currently active channel during successive survey dump commands. example: $ iw dev wlan0 survey dump Survey data from wlan0 frequency: 5180 MHz [in use] channel active time: 54995 ms channel busy time: 432 ms channel receive time: 0 ms channel transmit time: 59 ms ... $ iw dev wlan0 survey dump Survey data from wlan0 frequency: 5180 MHz [in use] channel active time: 32592 ms channel busy time: 254 ms channel receive time: 0 ms channel transmit time: 0 ms ... The correct way to handle this is to use the non-clearing WMI_BSS_SURVEY_REQ_TYPE_READ wmi_bss_survey_req_type. The firmware will then accumulate the survey data and handle wrap arounds. Tested-on: QCA9984 hw1.0 10.4-3.5.3-00057 Tested-on: QCA988X hw2.0 10.2.4-1.0-00047 Tested-on: QCA9888 hw2.0 10.4-3.9.0.2-00024 Tested-on: QCA4019 hw1.0 10.4-3.6-00140 Fixes: fa7937e ("ath10k: update bss channel survey information") Signed-off-by: Venkateswara Naralasetty <[email protected]> Tested-by: Markus Theil <[email protected]> Tested-by: John Deere <[email protected]> [[email protected]: adjust commit message] Signed-off-by: Sven Eckelmann <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 54f9ab7 ] The value for "aid" comes from skb->data so Smatch marks it as untrusted. If it's invalid then it can result in an out of bounds array access in ath6kl_add_new_sta(). Fixes: 572e27c ("ath6kl: Fix AP mode connect event parsing and TIM updates") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/20200813141315.GB457408@mwanda Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 2705cd7 ] The value of "htc_hdr->endpoint_id" comes from skb->data so Smatch marks it as untrusted so we have to check it before using it as an array offset. This is similar to a bug that syzkaller found in commit e4ff08a ("ath9k: Fix use-after-free Write in ath9k_htc_rx_msg") so it is probably a real issue. Fixes: fb9987d ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/20200813141253.GA457408@mwanda Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 3b9fb67 ] Qualcomm's document "80-WL007-1 Rev. J" states that the highest rx rate for the WCN3660 and WCN3680 on MCS 7 is 150 Mbps not the 72 Mbps stated here. This patch fixes the data-rate declared in the 5GHz table. Fixes: 8e84c25 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware") Signed-off-by: Bryan O'Donoghue <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 5fd1882 ] lpass_pcm_data is never freed. Free it in close ops to avoid memory leak. Fixes: 022d00e ("ASoC: lpass-platform: Fix broken pcm data usage") Signed-off-by: Rohit kumar <[email protected]> Reviewed-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d2ab7f0 ] A possible call chain is as follow: mwifiex_sdio_interrupt (sdio.c) --> mwifiex_main_process (main.c) --> mwifiex_process_cmdresp (cmdevt.c) --> mwifiex_process_sta_cmdresp (sta_cmdresp.c) --> mwifiex_ret_802_11_scan (scan.c) --> mwifiex_parse_single_response_buf (scan.c) 'mwifiex_sdio_interrupt()' is an interrupt function. Also note that 'mwifiex_ret_802_11_scan()' already uses GFP_ATOMIC. So use GFP_ATOMIC instead of GFP_KERNEL when memory is allocated in 'mwifiex_parse_single_response_buf()'. Fixes: 7c6fa2a ("mwifiex: use cfg80211 dynamic scan table and cfg80211_get_bss API") or Fixes: 601216e ("mwifiex: process RX packets in SDIO IRQ thread directly") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit cdd296c ] Reviewing this block of code in cdv_intel_dp_init() ret = cdv_intel_dp_aux_native_read(gma_encoder, DP_DPCD_REV, ... cdv_intel_edp_panel_vdd_off(gma_encoder); if (ret == 0) { /* if this fails, presume the device is a ghost */ DRM_INFO("failed to retrieve link info, disabling eDP\n"); drm_encoder_cleanup(encoder); cdv_intel_dp_destroy(connector); goto err_priv; } else { The (ret == 0) is not strict enough. cdv_intel_dp_aux_native_read() returns > 0 on success otherwise it is failure. So change to <= Fixes: d112a81 ("gma500/cdv: Add eDP support") Signed-off-by: Tom Rix <[email protected]> Signed-off-by: Patrik Jakobsson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 574918e ] Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()'. Link: https://lore.kernel.org/r/[email protected] Fixes: 4161cee ("[SCSI] qla4xxx: Add host statistics support") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 44f4daf ] On an error exit path, a negative error code should be returned instead of a positive return value. Link: https://lore.kernel.org/r/[email protected] Fixes: f40e74f ("csiostor:firmware upgrade fix") Cc: Praveen Madhavan <[email protected]> Signed-off-by: Tianjia Zhang <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit b7a4f80 ] When of_property_read_u32_array() returns an error code, a pairing refcount decrement is needed to keep np's refcount balanced. Fixes: f705806 ("backlight: Add support Skyworks SKY81452 backlight driver") Signed-off-by: Dinghao Liu <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 90ca633 ] In a couple of places in qp_host_get_user_memory(), get_user_pages_fast() is called without properly checking for errors. If e.g. -EFAULT is returned, this negative value will then be passed on to qp_release_pages(), which expects a u64 as input. Fix this by only calling qp_release_pages() when we have a positive number returned. Fixes: 06164d2 ("VMCI: queue pairs implementation.") Signed-off-by: Alex Dewar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 0fb9342 ] parse_options() in drivers/tty/serial/earlycon.c calls uart_parse_earlycon in drivers/tty/serial/serial_core.c therefore selecting SERIAL_EARLYCON should automatically select SERIAL_CORE, otherwise will result in symbol not found error during linking if SERIAL_CORE is not configured as builtin Fixes: 9aac588 ("tty/serial: add generic serial earlycon") Signed-off-by: Tong Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 63ffcbd ] The code currently NULLs tty->driver_data in hvcs_close() with the intent of informing the next call to hvcs_open() that device needs to be reconfigured. However, when hvcs_cleanup() is called we copy hvcsd from tty->driver_data which was previoulsy NULLed by hvcs_close() and our call to tty_port_put(&hvcsd->port) doesn't actually do anything since &hvcsd->port ends up translating to NULL by chance. This has the side effect that when hvcs_remove() is called we have one too many port references preventing hvcs_destuct_port() from ever being called. This also prevents us from reusing the /dev/hvcsX node in a future hvcs_probe() and we can eventually run out of /dev/hvcsX devices. Fix this by waiting to NULL tty->driver_data in hvcs_cleanup(). Fixes: 27bf7c4 ("TTY: hvcs, add tty install") Signed-off-by: Tyrel Datwyler <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 71a174b ] b6da31b "tty: Fix data race in tty_insert_flip_string_fixed_flag" puts tty_flip_buffer_push under port->lock introducing the following possible circular locking dependency: [30129.876566] ====================================================== [30129.876566] WARNING: possible circular locking dependency detected [30129.876567] 5.9.0-rc2+ #3 Tainted: G S W [30129.876568] ------------------------------------------------------ [30129.876568] sysrq.sh/1222 is trying to acquire lock: [30129.876569] ffffffff92c39480 (console_owner){....}-{0:0}, at: console_unlock+0x3fe/0xa90 [30129.876572] but task is already holding lock: [30129.876572] ffff888107cb9018 (&pool->lock/1){-.-.}-{2:2}, at: show_workqueue_state.cold.55+0x15b/0x6ca [30129.876576] which lock already depends on the new lock. [30129.876577] the existing dependency chain (in reverse order) is: [30129.876578] -> #3 (&pool->lock/1){-.-.}-{2:2}: [30129.876581] _raw_spin_lock+0x30/0x70 [30129.876581] __queue_work+0x1a3/0x10f0 [30129.876582] queue_work_on+0x78/0x80 [30129.876582] pty_write+0x165/0x1e0 [30129.876583] n_tty_write+0x47f/0xf00 [30129.876583] tty_write+0x3d6/0x8d0 [30129.876584] vfs_write+0x1a8/0x650 [30129.876588] -> #2 (&port->lock#2){-.-.}-{2:2}: [30129.876590] _raw_spin_lock_irqsave+0x3b/0x80 [30129.876591] tty_port_tty_get+0x1d/0xb0 [30129.876592] tty_port_default_wakeup+0xb/0x30 [30129.876592] serial8250_tx_chars+0x3d6/0x970 [30129.876593] serial8250_handle_irq.part.12+0x216/0x380 [30129.876593] serial8250_default_handle_irq+0x82/0xe0 [30129.876594] serial8250_interrupt+0xdd/0x1b0 [30129.876595] __handle_irq_event_percpu+0xfc/0x850 [30129.876602] -> #1 (&port->lock){-.-.}-{2:2}: [30129.876605] _raw_spin_lock_irqsave+0x3b/0x80 [30129.876605] serial8250_console_write+0x12d/0x900 [30129.876606] console_unlock+0x679/0xa90 [30129.876606] register_console+0x371/0x6e0 [30129.876607] univ8250_console_init+0x24/0x27 [30129.876607] console_init+0x2f9/0x45e [30129.876609] -> #0 (console_owner){....}-{0:0}: [30129.876611] __lock_acquire+0x2f70/0x4e90 [30129.876612] lock_acquire+0x1ac/0xad0 [30129.876612] console_unlock+0x460/0xa90 [30129.876613] vprintk_emit+0x130/0x420 [30129.876613] printk+0x9f/0xc5 [30129.876614] show_pwq+0x154/0x618 [30129.876615] show_workqueue_state.cold.55+0x193/0x6ca [30129.876615] __handle_sysrq+0x244/0x460 [30129.876616] write_sysrq_trigger+0x48/0x4a [30129.876616] proc_reg_write+0x1a6/0x240 [30129.876617] vfs_write+0x1a8/0x650 [30129.876619] other info that might help us debug this: [30129.876620] Chain exists of: [30129.876621] console_owner --> &port->lock#2 --> &pool->lock/1 [30129.876625] Possible unsafe locking scenario: [30129.876626] CPU0 CPU1 [30129.876626] ---- ---- [30129.876627] lock(&pool->lock/1); [30129.876628] lock(&port->lock#2); [30129.876630] lock(&pool->lock/1); [30129.876631] lock(console_owner); [30129.876633] *** DEADLOCK *** [30129.876634] 5 locks held by sysrq.sh/1222: [30129.876634] #0: ffff8881d3ce0470 (sb_writers#3){.+.+}-{0:0}, at: vfs_write+0x359/0x650 [30129.876637] #1: ffffffff92c612c0 (rcu_read_lock){....}-{1:2}, at: __handle_sysrq+0x4d/0x460 [30129.876640] #2: ffffffff92c612c0 (rcu_read_lock){....}-{1:2}, at: show_workqueue_state+0x5/0xf0 [30129.876642] #3: ffff888107cb9018 (&pool->lock/1){-.-.}-{2:2}, at: show_workqueue_state.cold.55+0x15b/0x6ca [30129.876645] #4: ffffffff92c39980 (console_lock){+.+.}-{0:0}, at: vprintk_emit+0x123/0x420 [30129.876648] stack backtrace: [30129.876649] CPU: 3 PID: 1222 Comm: sysrq.sh Tainted: G S W 5.9.0-rc2+ #3 [30129.876649] Hardware name: Intel Corporation 2012 Client Platform/Emerald Lake 2, BIOS ACRVMBY1.86C.0078.P00.1201161002 01/16/2012 [30129.876650] Call Trace: [30129.876650] dump_stack+0x9d/0xe0 [30129.876651] check_noncircular+0x34f/0x410 [30129.876653] __lock_acquire+0x2f70/0x4e90 [30129.876656] lock_acquire+0x1ac/0xad0 [30129.876658] console_unlock+0x460/0xa90 [30129.876660] vprintk_emit+0x130/0x420 [30129.876660] printk+0x9f/0xc5 [30129.876661] show_pwq+0x154/0x618 [30129.876662] show_workqueue_state.cold.55+0x193/0x6ca [30129.876664] __handle_sysrq+0x244/0x460 [30129.876665] write_sysrq_trigger+0x48/0x4a [30129.876665] proc_reg_write+0x1a6/0x240 [30129.876666] vfs_write+0x1a8/0x650 It looks like the commit was aimed to protect tty_insert_flip_string and there is no need for tty_flip_buffer_push to be under this lock. Fixes: b6da31b ("tty: Fix data race in tty_insert_flip_string_fixed_flag") Signed-off-by: Artem Savkov <[email protected]> Acked-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 7f360be ] First, when memory allocation for sg_list_unaligned failed, there is a bug of calling put_pages() as we haven't pinned any pages. Second, if get_user_pages_fast() failed we should unpin num_pinned pages. This will address both. As part of these changes, minor update in documentation. Fixes: 6db7199 ("drivers/virt: introduce Freescale hypervisor management driver") Signed-off-by: Souptick Joarder <[email protected]> Reviewed-by: Dan Carpenter <[email protected]> Reviewed-by: John Hubbard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Ivan Li <[email protected]> Change-Id: I13a60faa33a4db1bddfb04d0b807259d54c70ae1
arm64: dts: VIM1/VIM2/VIM3/VIM3L: add cdc_mbin module
Khadas vims 4.9.y
Signed-off-by: Yan Wang <[email protected]> Change-Id: I71bec0f9a67e89d7bf9edcc4de14b5fad6698e01
Signed-off-by: Yan Wang <[email protected]> Change-Id: Id81ac68004e3c37babd5648263512cee7799de40
Khadas vims 4.9.y
Signed-off-by: Nick Xie <[email protected]> Change-Id: I4acaa347f4186e0c194cb425ac4df12eca51ca1d
Signed-off-by: Ivan Li <[email protected]> Change-Id: I950ba3d67d1331e55fa69a4494bbce5b8318b296
Signed-off-by: Ivan Li <[email protected]> Change-Id: Ia479f2aeb062a8439d54f2479b318a7cb4a85cd9
Khadas vims 4.9.y
Enable TUN in kernel image
This reverts commit 7ce6fe3.
This reverts commit 6cfa8a7.
Signed-off-by: Nick Xie <[email protected]> Change-Id: If353d13bb45871ce8a28222c5f7c565f20122f3a
Signed-off-by: Nick Xie <[email protected]> Change-Id: I1943de683c2789962d608f6a86807ec56accbb0c
Signed-off-by: Ivan.li <[email protected]> Change-Id: I9e0d90456c1940e67cdead1af1623fd350c1a887
arm64: dts: VIM3L: Fix DT overlays to enable spi
Signed-off-by: Ivan.li <[email protected]> Change-Id: I7ca911ab6e310b77bace3c8a68fbc41917685c51
Signed-off-by: Ivan.li <[email protected]> Change-Id: Ib88f813d17429b3fe830f6c54c77b430d6f087d6
Signed-off-by: Ivan.li <[email protected]> Change-Id: I05599bc2f43b0674580e778c8c6a407014a4818b
Khadas vims 4.9.y
Signed-off-by: Ivan.li <[email protected]> Change-Id: If9e81eefc2a1493189129127a050ca91711c230e
Signed-off-by: Ivan.li <[email protected]> Change-Id: Ibfc40943cefb838a8fdc7079e9222e0fb8d9704f
Khadas vims 4.9.y
Signed-off-by: Nick Xie <[email protected]> Change-Id: Ib68a086df4d375093e2e41575ecb060e76a8c0e3
JacobZang
pushed a commit
to JacobZang/linux
that referenced
this pull request
Jun 25, 2024
We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [khadas#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 khadas#6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) khadas#1 btrfs_drop_extents (fs/btrfs/file.c:411:4) khadas#2 log_one_extent (fs/btrfs/tree-log.c:4732:9) khadas#3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) khadas#4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) khadas#5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) khadas#6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) khadas#7 btrfs_sync_file (fs/btrfs/file.c:1933:8) khadas#8 vfs_fsync_range (fs/sync.c:188:9) khadas#9 vfs_fsync (fs/sync.c:202:9) khadas#10 do_fsync (fs/sync.c:212:9) khadas#11 __do_sys_fdatasync (fs/sync.c:225:9) khadas#12 __se_sys_fdatasync (fs/sync.c:223:1) khadas#13 __x64_sys_fdatasync (fs/sync.c:223:1) khadas#14 do_syscall_x64 (arch/x86/entry/common.c:52:14) khadas#15 do_syscall_64 (arch/x86/entry/common.c:83:7) khadas#16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: David Sterba <[email protected]>
JacobZang
pushed a commit
to JacobZang/linux
that referenced
this pull request
Jul 19, 2024
The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 khadas#1 __crash_kexec at ffffffff8c1338fa khadas#2 panic at ffffffff8c1d69b9 khadas#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] khadas#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] khadas#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] khadas#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] khadas#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] khadas#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] khadas#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] khadas#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] khadas#11 dio_complete at ffffffff8c2b9fa7 khadas#12 do_blockdev_direct_IO at ffffffff8c2bc09f khadas#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] khadas#14 generic_file_direct_write at ffffffff8c1dcf14 khadas#15 __generic_file_write_iter at ffffffff8c1dd07b khadas#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] khadas#17 aio_write at ffffffff8c2cc72e khadas#18 kmem_cache_alloc at ffffffff8c248dde khadas#19 do_io_submit at ffffffff8c2ccada khadas#20 do_syscall_64 at ffffffff8c004984 khadas#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
viraniac
pushed a commit
to viraniac/khadas_linux
that referenced
this pull request
Aug 21, 2024
…s_del_by_dev() [ Upstream commit 01a564b ] I got the below warning trace: WARNING: CPU: 4 PID: 4056 at net/core/dev.c:11066 unregister_netdevice_many_notify CPU: 4 PID: 4056 Comm: ip Not tainted 6.7.0-rc4+ khadas#15 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:unregister_netdevice_many_notify+0x9a4/0x9b0 Call Trace: rtnl_dellink rtnetlink_rcv_msg netlink_rcv_skb netlink_unicast netlink_sendmsg __sock_sendmsg ____sys_sendmsg ___sys_sendmsg __sys_sendmsg do_syscall_64 entry_SYSCALL_64_after_hwframe It can be repoduced via: ip netns add ns1 ip netns exec ns1 ip link add bond0 type bond mode 0 ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2 ip netns exec ns1 ip link set bond_slave_1 master bond0 [1] ip netns exec ns1 ethtool -K bond0 rx-vlan-filter off [2] ip netns exec ns1 ip link add link bond_slave_1 name bond_slave_1.0 type vlan id 0 [3] ip netns exec ns1 ip link add link bond0 name bond0.0 type vlan id 0 [4] ip netns exec ns1 ip link set bond_slave_1 nomaster [5] ip netns exec ns1 ip link del veth2 ip netns del ns1 This is all caused by command [1] turning off the rx-vlan-filter function of bond0. The reason is the same as commit 01f4fd2 ("bonding: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves"). Commands [2] [3] add the same vid to slave and master respectively, causing command [4] to empty slave->vlan_info. The following command [5] triggers this problem. To fix this problem, we should add VLAN_FILTER feature checks in vlan_vids_add_by_dev() and vlan_vids_del_by_dev() to prevent incorrect addition or deletion of vlan_vid information. Fixes: 348a144 ("vlan: introduce functions to do mass addition/deletion of vids by another device") Signed-off-by: Liu Jian <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
123Xiong-Zhang
pushed a commit
that referenced
this pull request
Nov 7, 2024
When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.
[ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called
[ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called
...
[ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280
crash> bt
...
PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd"
...
#9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
[exception RIP: dma_pool_alloc+0x1ab]
RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046
RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000
RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090
RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00
R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0
R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
#11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
#12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
#13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
#14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
#15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
#16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
#17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
#18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
#19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
#20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
#21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
#22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
#23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
#24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
#25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
#26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92
crash> net_device.state ffff89443b0c0000
state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER)
To prevent this scenario, we also make sure that the netdevice is present.
Signed-off-by: suresh kumar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
SPIB verifcation. Need to try connecting one device to SPI_B in VIM3L