This repository contains CLI service for HARDWARIO USB Gateway.
The service connects to a serial port where HARDWARIO USB Gateway is connected.
It converts messages from serial port to MQTT broker and vice versa.
Run with --help
parameter to see the available options.
It works with Python 2.7+ and Python 3.5+ environments and it has been tested under Linux, macOS and Windows.
pip3 install -U bcg
Install as a system-wide local Python package.
git clone https://github.com/bigclownlabs/bch-gateway.git
cd bch-gateway
sudo pip3 install -e .
Note: Parameter
-e
instructs to install files as symlinks, so changes to the source files will be immediately available to other users of the package on the host.
-
Get info about all connected gateway
mosquitto_pub -t 'gateway/all/info/get' -n
response:
gateway/{name}/info {"id": "836d19839c3b", "firmware": "bcf-gateway-...."}
-
List of paired nodes
mosquitto_pub -t 'gateway/{name}/nodes/get' -n
response:
gateway/{name}/nodes ["{id-node-0}", "{id-node-id1}", "{id-node-id2}"]
-
Pairing mode
-
Start
mosquitto_pub -t 'gateway/{name}/pairing-mode/start' -n
LED on gateway start blink
response:
gateway/{name}/pairing-mode "start"
Gateway is waiting to pair node. To pare node, long press the button on Core Module.
response when the node is successfully added:
gateway/{name}/attach "{id-node-0}" gateway/{name}/attach "{id-node-1}" ...
Error response if there is not enough space:
gateway/{name}/attach-failure "{id-node-1}"
-
Stop
mosquitto_pub -t 'gateway/{name}/pairing-mode/stop' -n
LED on gateway turns off
response:
gateway/{name}/pairing-mode "stop"
-
-
Purge all nodes
mosquitto_pub -t 'gateway/{name}/nodes/purge' -n
response:
gateway/{name}/nodes []
-
Manual Add/Pair node
mosquitto_pub -t 'gateway/{name}/nodes/add' -m '"{id-node}"'
response:
gateway/{name}/attach "{id-node}"
Error response if there is not enough space:
gateway/{name}/attach-failure "{id-node-1}"
-
Manual Remove/Unpair node
mosquitto_pub -t 'gateway/{name}/nodes/remove' -m '"{id-node}"'
response:
gateway/{name}/detach "{id-node}"
-
Set node alias
mosquitto_pub -t 'gateway/usb-dongle/alias/set' -m '{"id": "id-node", "alias": "new-alias"}'
respose:
gateway/usb-dongle/alias/set/ok {"id": "id-node", "alias": "new-alias"}
-
Remove node alias
mosquitto_pub -t 'gateway/usb-dongle/alias/remove' -m '"{id-node}"'
mosquitto_pub -t 'gateway/usb-dongle/alias/set' -m '{"id": "id-node", "alias": null}'
-
Scan Start
-
Start
mosquitto_pub -t 'gateway/{name}/scan/start' -n
response:
gateway/{name}/scan "start"
response for unknown node
gateway/{name}/found "{id-node-0}" gateway/{name}/found "{id-node-1}" gateway/{name}/found "{id-node-2}" ...
-
Stop
mosquitto_pub -t 'gateway/{name}/scan/stop' -n
response:
gateway/{name}/scan "stop"
-
-
Automatic pairing of all visible nodes
!!! This is experimental features do not all work
-
Start
mosquitto_pub -t 'gateway/{name}/automatic-pairing/start' -n
LED on gateway start blink
response:
gateway/{name}/automatic-pairing "start"
response when the node is successfully added:
gateway/{name}/attach "{id-node-0}" gateway/{name}/attach "{id-node-1}" ...
-
Stop
mosquitto_pub -t 'gateway/{name}/automatic-pairing/stop' -n
LED on gateway turns off response: ``` gateway/{name}/automatic-pairing "stop" ```
-
Configuration file is in yaml format
-
device: string
example: /dev/ttyUSB0
-
name: string
support variables:
- {ip} - ip address
- {id} - the id of the connected usb-dongle or core-module
default: null - automatic detect name from gateway firmware
example: "{ip}-ttyUSB0"
-
mqtt: object
-
host: string
default: 127.0.0.1
-
port: int
defualt: 1883
-
username: string
-
password: string
-
cafile: string
-
certfile: string
-
keyfile: string
-
-
retain_node_messages: bool
default: False
-
qos_node_messages: int
default: 1
-
base_topic_prefix: string
example: home-
-
automatic_remove_kit_from_names: bool
default: True
-
automatic_rename_kit_nodes: bool
default: True
-
automatic_rename_generic_nodes: bool
default: True
-
automatic_rename_nodes: bool
default: True
-
rename: object
If you use Node-Red, you can import text below to create buttons in your flow. You can list, pair and delete nodes with a click of the mouse.
-
For bcf-gateway-usb-dongle
[{"id":"83c6c60c.209d78","type":"mqtt in","z":"97027127.a55f7","name":"","topic":"#","qos":"2","broker":"de273190.7f6f2","x":610,"y":80,"wires":[["454a64bc.50f77c"]]},{"id":"454a64bc.50f77c","type":"debug","z":"97027127.a55f7","name":"","active":true,"console":"false","complete":"false","x":790,"y":80,"wires":[]},{"id":"9e87ab30.a50be8","type":"inject","z":"97027127.a55f7","name":"All gateway info","topic":"gateway/all/info/get","payload":"","payloadType":"str","repeat":"","crontab":"","once":false,"x":639,"y":172,"wires":[["504dd396.bb5b4c"]]},{"id":"504dd396.bb5b4c","type":"mqtt out","z":"97027127.a55f7","name":"","topic":"","qos":"","retain":"","broker":"de273190.7f6f2","x":824,"y":173,"wires":[]},{"id":"f447966d.ed0cb8","type":"inject","z":"97027127.a55f7","name":"Pairing mode start","topic":"gateway/usb-dongle/pairing-mode/start","payload":"","payloadType":"str","repeat":"","crontab":"","once":false,"x":660,"y":280,"wires":[["ae043e16.df77c"]]},{"id":"ae043e16.df77c","type":"mqtt out","z":"97027127.a55f7","name":"","topic":"","qos":"","retain":"","broker":"de273190.7f6f2","x":825,"y":281,"wires":[]},{"id":"80092576.c83998","type":"inject","z":"97027127.a55f7","name":"Pairing mode stop","topic":"gateway/usb-dongle/pairing-mode/stop","payload":"","payloadType":"str","repeat":"","crontab":"","once":false,"x":660,"y":320,"wires":[["86c93689.7d0e58"]]},{"id":"86c93689.7d0e58","type":"mqtt out","z":"97027127.a55f7","name":"","topic":"","qos":"","retain":"","broker":"de273190.7f6f2","x":825,"y":321,"wires":[]},{"id":"8f7b14c7.898c38","type":"inject","z":"97027127.a55f7","name":"List of paired nodes","topic":"gateway/usb-dongle/nodes/get","payload":"","payloadType":"str","repeat":"","crontab":"","once":false,"x":650,"y":220,"wires":[["75f5e8db.ed19a8"]]},{"id":"75f5e8db.ed19a8","type":"mqtt out","z":"97027127.a55f7","name":"","topic":"","qos":"","retain":"","broker":"de273190.7f6f2","x":825,"y":221,"wires":[]},{"id":"ed3cfe08.3321b","type":"inject","z":"97027127.a55f7","name":"purge all nodes","topic":"gateway/usb-dongle/nodes/purge","payload":"","payloadType":"str","repeat":"","crontab":"","once":false,"x":640,"y":380,"wires":[["2acde0de.0d9de"]]},{"id":"2acde0de.0d9de","type":"mqtt out","z":"97027127.a55f7","name":"","topic":"","qos":"","retain":"","broker":"de273190.7f6f2","x":825,"y":381,"wires":[]},{"id":"de273190.7f6f2","type":"mqtt-broker","z":"","broker":"localhost","port":"1883","clientid":"","usetls":false,"compatmode":true,"keepalive":"60","cleansession":true,"willTopic":"","willQos":"0","willPayload":"","birthTopic":"","birthQos":"0","birthPayload":""}]
-
For bcf-gateway-core-module
[{"id":"47ab49a8.0a88f8","type":"mqtt in","z":"97027127.a55f7","name":"","topic":"#","qos":"2","broker":"deefb40d.51f818","x":370,"y":100,"wires":[["7208a9c6.a8d3e8"]]},{"id":"7208a9c6.a8d3e8","type":"debug","z":"97027127.a55f7","name":"","active":true,"console":"false","complete":"false","x":550,"y":100,"wires":[]},{"id":"3e634a0c.8e15e6","type":"inject","z":"97027127.a55f7","name":"All gateway info","topic":"gateway/all/info/get","payload":"","payloadType":"str","repeat":"","crontab":"","once":false,"x":399,"y":192,"wires":[["84e9ef97.a81d5"]]},{"id":"84e9ef97.a81d5","type":"mqtt out","z":"97027127.a55f7","name":"","topic":"","qos":"","retain":"","broker":"deefb40d.51f818","x":584,"y":193,"wires":[]},{"id":"6d1a6395.7b49ac","type":"inject","z":"97027127.a55f7","name":"Pairing mode start","topic":"gateway/core-module/pairing-mode/start","payload":"","payloadType":"str","repeat":"","crontab":"","once":false,"x":400,"y":320,"wires":[["6bb142ef.da565c"]]},{"id":"6bb142ef.da565c","type":"mqtt out","z":"97027127.a55f7","name":"","topic":"","qos":"","retain":"","broker":"deefb40d.51f818","x":585,"y":321,"wires":[]},{"id":"191cf80e.901568","type":"inject","z":"97027127.a55f7","name":"Pairing mode stop","topic":"gateway/core-module/pairing-mode/stop","payload":"","payloadType":"str","repeat":"","crontab":"","once":false,"x":400,"y":360,"wires":[["11669b55.138775"]]},{"id":"11669b55.138775","type":"mqtt out","z":"97027127.a55f7","name":"","topic":"","qos":"","retain":"","broker":"deefb40d.51f818","x":585,"y":361,"wires":[]},{"id":"de1bca38.1214f8","type":"inject","z":"97027127.a55f7","name":"List of paired nodes","topic":"gateway/core-module/nodes/get","payload":"","payloadType":"str","repeat":"","crontab":"","once":false,"x":410,"y":240,"wires":[["7cb77d25.465514"]]},{"id":"7cb77d25.465514","type":"mqtt out","z":"97027127.a55f7","name":"","topic":"","qos":"","retain":"","broker":"deefb40d.51f818","x":585,"y":241,"wires":[]},{"id":"ec929b66.dddbb8","type":"inject","z":"97027127.a55f7","name":"purge all nodes","topic":"gateway/core-module/nodes/purge","payload":"","payloadType":"str","repeat":"","crontab":"","once":false,"x":400,"y":420,"wires":[["afe70282.f5ead"]]},{"id":"afe70282.f5ead","type":"mqtt out","z":"97027127.a55f7","name":"","topic":"","qos":"","retain":"","broker":"deefb40d.51f818","x":585,"y":421,"wires":[]},{"id":"deefb40d.51f818","type":"mqtt-broker","z":"","broker":"localhost","port":"1883","clientid":"","usetls":false,"compatmode":true,"keepalive":"60","cleansession":true,"willTopic":"","willQos":"0","willPayload":"","birthTopic":"","birthQos":"0","birthPayload":""}]
This project is licensed under the MIT License - see the LICENSE file for details.
Made with ❤ by HARDWARIO a.s. in the heart of Europe.