docker-kf2

Dockerfile for running a Killing Floor 2 server

• GitHub: https://github.com/dwurf/docker-kf2
• Docker Hub: https://hub.docker.com/r/dwurf/docker-kf2/

Requirements

2GB RAM and 20GB free disk space are essential. SSD recommended, otherwise map changes will take a long time. Disk space requirements will keep going up as updates are released.

RHEL Host Nodes

A couple of amendments specific to RHEL and any offshoots:

To allow an IPv4 address to be shared with containers on a RHEL host, you need to ensure that net.ipv4.ip_forward is enabled. This can be set using sysctl -w net.ipv4.ip_forward=1. Afterwards, you must restart docker systemctl restart docker or service docker restart depending on if you are using init.d or systemd.

With docker -v mounts you can add :z to the end of the mount argument to add the relevant SELinux contexts to use the bind mount automatically. For example -v $HOME/kf2:/home/steam/kf2server becomes -v $HOME/kf2:/home/steam/kf2server:z.

Simple start

mkdir -p $HOME/{kf2,kf2_steamdir}
docker run -d -t --name kf2 -p 0.0.0.0:20560:20560/udp \
    -p 0.0.0.0:27015:27015/udp \
    -p 0.0.0.0:7777:7777/udp \
    -p 0.0.0.0:8080:8080 \
    -v $HOME/kf2:/home/steam/kf2server \
    -v $HOME/kf2_steamdir:/home/steam/steam \
    dwurf/docker-kf2:latest

Configuring the server

Initial server state configuration is done via environment variables. To run a long game on the hard setting, run the following:

docker run -d -t --name kf2 -p 0.0.0.0:20560:20560/udp \
    -p 0.0.0.0:27015:27015/udp \
    -p 0.0.0.0:7777:7777/udp \
    -p 0.0.0.0:8080:8080 \
    -v $HOME/kf2:/home/steam/kf2server \
    -v $HOME/kf2_steamdir:/home/steam/steam \
    -e KF_DIFFICULTY=1 \
    -e KF_GAME_LENGTH=2 \
    dwurf/docker-kf2:latest

Updating the server

Run the container with the command update

docker run -d -t --name kf2 -p 0.0.0.0:20560:20560/udp \
    -p 0.0.0.0:27015:27015/udp \
    -p 0.0.0.0:7777:7777/udp \
    -p 0.0.0.0:8080:8080 \
    -v $HOME/kf2:/home/steam/kf2server \
    -v $HOME/kf2_steamdir:/home/steam/steam \
    dwurf/docker-kf2:latest \
    update

Further arguments get passed to the update command, e.g.

docker run -d -t --name kf2 -p 0.0.0.0:20560:20560/udp \
    -p 0.0.0.0:27015:27015/udp \
    -p 0.0.0.0:7777:7777/udp \
    -p 0.0.0.0:8080:8080 \
    -v $HOME/kf2:/home/steam/kf2server \
    -v $HOME/kf2_steamdir:/home/steam/steam \
    dwurf/docker-kf2:latest \
    update -beta preview validate

Variables

Variable	Default	Description
KF_MAP	KF-BioticsLab	Starting map when the server is first loaded.
KF_DIFFICULTY	0	Game difficulty. * 0 - normal * 1 - hard * 2 - suicidal * 3 - hell on earth
KF_ADMIN_PASS	secret	Used for web console and in-game admin logins.
KF_GAME_PASS	''	The password used to access the game. Setting this will make the server "private".
KF_GAME_LENGTH	1	The length of the game. * 0 - 4 waves * 1 - 7 waves * 2 - 10 waves
KF_GAME_MODE	Survival	The gametype to use. * Survival * VersusSurvival * WeeklySurvival * Endless
KF_PORT	7777	The game port (UDP) used to accept incoming clients. This is the port entered in the ingame console's open command.
KF_QUERY_PORT	KF_PORT + 19238	The query port used to this server instance.
KF_MUTATORS	''	If the mutators are correctly installed on the server they can be used like this: mutator=ClassicScoreboard.ClassicSCMut,KFMutator.KFMutator_MaxPlayersV2 Multiple mutators must be seperated with a ,
KF_SERVER_NAME	KF2	The server name to display in the server browser.
KF_ENABLE_WEB	false	A boolean toggle for the web interface hosted on the KF_WEBADMIN_PORT (default 8080) If setting this to true, it's recommended you change the KF_ADMIN_PASS variable too.
KF_WEBADMIN_PORT	8080	The port used to access the web admin interface.
KF_DISABLE_TAKEOVER	false	Allows the server to be used by other players looking to create a private game when the server is uninhabited.
KF_BANNER_LINK	http:\/\/art.tripwirecdn.com\/TestItemIcons\/MOTDServer.png	A link to a PNG file to display on the server welcome page. You must escape special characters.
KF_MOTD	Welcome to our server. \n \n Have fun and good luck!	A MOTD message to show under the banner image on the welcome page. You must escape special characters.
KF_WEBSITE_LINK	http:\/\/killingfloor2.com	A website link shown at the bottom of the srver welcome page to allow the visitor to go to your site. You must escape special characters.
MULTIHOME_IP	''	Sets the IP to run the server on in cases where it has been assigned multiple public IPs.

NOTE: Special characters are anything that sed considers special, so /, ^, , * etc. To escape the character, prepend \ before it as in the examples provided in the compose files and above.

Running multiple servers

1. Ensure 'command' in docker-compose.yml is not present. Updates will be handled from the first server only.
2. Expose different ports (e.g. increment) in each case, set KF_PORT, KF_QUERY_PORT (can be left as normal if it's KF_PORT + 19238) and KF_WEBADMIN_PORT (if KF_ENABLE_WEB is true) environment variables to match.
3. Change server name (optional)

Update the volume mounts as follows:

Map the following read-only volume from server 1

• $HOME/kf2:/home/steam/kf2server:ro \

Map the following read-write volumes

• $HOME/kf2-server2/steam/:/home/steam/steam
• $HOME/kf2-server2/kf2server/KFGame/Logs:/home/steam/kf2server/KFGame/Logs
• $HOME/kf2-server2/kf2server/KFGame/Config:/home/steam/kf2server/KFGame/Config

These are only required for Steam Workshop maps (see below)

• $HOME/kf2-server2/kf2server/Binaries/Win64/steamapps:/home/steam/kf2server/Binaries/Win64/steamapps
• $HOME/kf2-server2/kf2server/KFGame/Cache:/home/steam/kf2server/KFGame/Cache

You must also copy the basic config files from server1

mkdir -p $HOME/kf2-server2/kf2server/KFGame/Config
cp -a $HOME/kf2/kf2server/KFGame/Config/* $HOME/kf2-server2/kf2server/KFGame/Config

Extra Configuration

The configurator functions can be used to regenerate the KF2 configuration files. This is done using a ~/game.yml file. If this exists, ~/configurator/GenerateConfig.rb is run which templates the configuration files KFGame and KFEngine. The intention here is to allow for the map lists to more easily include customized maps.

Custom Maps

Find the map you wish to use on the Steam workshop, for example [https://steamcommunity.com/sharedfiles/filedetails/?id=1551913612][]. Note the ID argument from the URL (1551913612) and the name of the map (KF-NachtDerUntoten_TraderPod) and add this to ~/game.yml:

custommaps:
  - name: "KF-NachtDerUntoten_TraderPod",
    steamworksids:
      - 1551913612

At runtime, the configuration files will be written and will include the map alongside the default maps (found in configurator/DefaultMaps.yml). A number of properties are possible to set for each map added via game.yml. These are listed below:

Property	Default	Description
name	N/A	Must be set otherwise the configuration will not be generated. The name of the map you're adding, per it's name in the Cache directory of the server. If you're unsure what this is, you can add it with any name and it will still be downloaded after the server starts but will not appear in the map rotation. The docker logs for the container will contain references to the map and the looking in the cache directory usually shows the map name quite clearly.
steamworksids	N/A	Must be set in order to download the map at runtime. An array of IDs provided to the KFEngine ini file to download the relevant map. This can be set to multiple things for accessibility.
mapfilename	name	The name of the file used for the KFMapSummary section mapname. Can be set differently for accessibility.
screenshot	UI_MapPreview_TEX.UI_MapPreview_Placeholder	The thumbnail image to use for the map.
playableInSurvival	true	Determines if the map can be played in survival mode.
playableInWeekly	true	Determines if the map can be played in weekly mode.
playableInEndless	true	Determines if the map can be played in endless mode.
playableInVsSurvival	true	Determines if the map can be played in vs survival mode.
playableInObjective	true	Determines if the map can be played in objective mode.
mapAssociation	1	Determines if the map is official (2) or custom (1). This should almost always be 1 but is settable for accessibility.

Building the image

docker build -t dwurf/docker-kf2:latest .

Similar projects

• KF1 server in Docker

TODO

• Add support for running multiple KF2 servers from the one directory
• Map logs and config to another volume(s)
• This is docker, we shouldn't need logs (use docker logs) and config should be done via env variables (i.e. move the config file outside of the volume but it doesn't need to be exposed)
• See also ConfigSubDir under https://wiki.tripwireinteractive.com/index.php?title=Dedicated_Server_(Killing_Floor_2)#Command_Line_Launch_Options
• Add support for custom map cycles https://wiki.tripwireinteractive.com/index.php?title=Dedicated_Server_(Killing_Floor_2)#Maps