Docker Container with haproxy and certbot. Haproxy is setup to use a 0 downtime reload method that queses requests when the Haproxy service is bounced as new certificates are added or existing certificates refreshed.
First some terminology... HAProxy is a reverse proxy load balancer among other things. Let's Encrypt is a service that allows the creation and renewal of SSL certificates at no cost through an API and with automatic authentication. Certbot is a Linux CLI tool for interfacing with the Let's Encrypt API.
Certbot contains it's own http/https server and handles the authorization process from Let's Encrypt. This container is setup using HAProxy to redirect the Let's Encrypt callbacks (authentication) to the certbot http server while all other requests are directed to the backend server(s). This configuration of HAProxy is also setup todo all the SSL termination so that your backend server(s) do not require a SSL configuration or certificates to be installed.
In order to use this in your environment, you must point all your SSL enabled domains to the IP Address of this container. This means updating the A Records for these domains with your DNS Provider. This includes the website name and all alternate names (i.e. example.com and www.example.com). After this is setup, an inbound request for your website(s) is initially received by HA Proxy. If the request is part of the Let's Encrypt authentication process, it will redirect that traffic to the local instance of certbot which is running on internal container ports 8080 and 8443. Otherwise it will pass through the request to a backend server (or servers) as defined in the haproxy.cfg file. The details of HAProxy setup are out of the scope for this README, but some examples are included below to get you started.
This will create the haproxy-certbot container. Note that only the inbound ports for 80 and 443 are exposed.
docker run -d \
--restart=always \
--name haproxy-certbot \
--cap-add=NET_ADMIN \
-p 80:80 \
-p 443:443 \
-v /docker/haproxy/config:/config \
-v /docker/haproxy/letsencrypt:/etc/letsencrypt \
-v /docker/haproxy/certs.d:/usr/local/etc/haproxy/certs.d \
nmarus/haproxy-certbotIt is important to note the mapping of the 3 volumes in the above command. This ensures that all non-persistent variable data is not maintained in the container itself.
The description of the 3 mapped volumes are as follows:
/config- The configuration file location for haproxy.cfg/etc/letsencrypt- The directory that Let's Encrypt will store it's configuration, certificates and private keys. It is of significant importance that you maintain a backup of this folder in the event the data is lost or corrupted./usr/local/etc/haproxy/certs.d- The directory that this container will store the processed certs/keys from Let's Encrypt after they have been converted into a format that HAProxy can use. This is automatically done at each refresh and can also be manually initiated. This volume is not as important as the previous as the certs used by HAProxy can be regenerated again based on the contents of the letsencrypt folder.
There are a handful of helper scripts to ease the amount of configuration parameters needed to administer this container.
This will add a new cert using a certbot config that is compatible with the haproxy config template below. After creating the cert, you should run the refresh script referenced below to initialize haproxy to use it. After adding the cert and running the refresh script, no further action is needed.
This example assumes you named you haproxy-certbot container using the same name as above when it was created. If not, adjust appropriately.
# request certificate from let's encrypt
docker exec haproxy-certbot certbot-certonly \
--domain example.com \
--domain www.example.com \
--email [email protected] \
--dry-run
# create/update haproxy formatted certs in certs.d and then restart haproxy
docker exec haproxy-certbot haproxy-refreshAfter testing the setup, remove --dry-run to generate a live certificate
Renewing happens automatically but should you choose to renew manually, you can do the following.
This example assumes you named you haproxy-certbot container using the same name as above when it was created. If not, adjust appropriately.
docker exec haproxy-certbot certbot-renew \
--dry-runAfter testing the setup, remove --dry-run to refresh a live certificate
This will parse and individually concatenate all the certs found in
/etc/letsencrypt/live directory into the folder
/usr/local/etc/haproxy/certs.d. It additionally will restart the HAProxy
service so that the new certs are active.
When HAProxy is restarted, the system will queue requests using tc and libnl and minimal to 0 interruption of the HAProxy services is expected.
See this blog entry for more details.
Note: This process automatically happens whenever the cron job runs to refresh the certificates that have been registered.
docker exec haproxy-certbot haproxy-refreshThis example intercepts the Let's Encrypt validation and redirects to certbot. Normal traffic is passed to the backend servers. If the request arrives as a http request, it is redirected to https. If there is not a certificate installed for the requested website, haproxy will present a self signed default certificate. This behavior can be modified by adapting the haproxy config file if so desired.
This example also does not do any routing based on the URL. It assumes that all domains pointed to this haproxy instance exist on the same backend server(s). The backend setup in this example consists of 3 web server that haproxy will load balance against. If there is only a single server, or a different quantity this can be adjusted in the backend configuration block. This specific example would be a configuration that could be used in front of a PaaS cluster such as Flynn.io or Tsuru.io (both of which have their own http router in order to direct the traffic to the required application).
global
maxconn 1028
log 127.0.0.1 local0
log 127.0.0.1 local1 notice
ca-base /etc/ssl/certs
crt-base /etc/ssl/private
ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
ssl-default-bind-options no-sslv3
defaults
option forwardfor
log global
timeout connect 5000ms
timeout client 50000ms
timeout server 50000ms
stats enable
stats uri /stats
stats realm Haproxy\ Statistics
stats auth admin:haproxy
frontend http-in
bind *:80
mode http
reqadd X-Forwarded-Proto:\ http
acl letsencrypt_http_acl path_beg /.well-known/acme-challenge/
redirect scheme https if !letsencrypt_http_acl
use_backend letsencrypt_http if letsencrypt_http_acl
default_backend my_http_backend
frontend https_in
bind *:443 ssl crt /usr/local/etc/haproxy/default.pem crt /usr/local/etc/haproxy/certs.d ciphers ECDHE-RSA-AES256-SHA:RC4-SHA:RC4:HIGH:!MD5:!aNULL:!EDH:!AESGCM
mode http
reqadd X-Forwarded-Proto:\ https
default_backend my_http_backend
backend letsencrypt_http
mode http
server letsencrypt_http_srv 127.0.0.1:8080
backend my_http_backend
mode http
balance leastconn
option tcp-check
option log-health-checks
server server1 1.1.1.1:80 check port 80
server server2 2.2.2.2:80 check port 80
server server3 3.3.3.3:80 check port 80