This project is closing its doors. With the advent of https://github.com/cgarwood/homeassistant-zwave_mqtt using https://github.com/OpenZWave/qt-openzwave a.k.a. ozwdaemon there is not much more I could wish for (let's say they stole, my idea if anyone is asking 😄). In good open-source fashion I'll better invest into these projects instead of re-inventing the wheel. It was a short, but fun ride...
to be an archive soon
- Maintain, troubleshoot, investigate the details of your Z-Wave network
- You are simply looking to (finally) replace ozwcp to maintain your network hassle-free? here you go!
- Access to your network from any automation with REST or publish your network as MQTT! (not yet available)
The current status:
-
Z-Wave backend / REST API: beta
-
Browser Frontend: alpha
-
exposing your Z-Wave network as MQTT client alpha, not for daily use, yet
- Activating
mqtt(within HA) and its discovery, allows full GUI based configuration - Within zwave-core just run start.py once the network is ready, visit: http://<my_zwave_core_ip>:8123/mqtt
- Activating
-
start somewhere, e.g.,
cd /tmp -
git clone [email protected]:daringer/zwave-core.git -
make sure you've python > 3.x installed
-
install venv using pip:
python -m pip install venv -
create a fresh virtual environment and activate it:
python -m venv /tmp/zwave_core_venv
source /tmp/zwave_core_venv/bin/activate- install the requirements:
cd /tmp/zwave-core
python -m pip install -r requirements.txt- locate your essential Z-Wave files and copy them into the zwave-core directory (this makes sure that you'll change nothing within your current Z-Wave using tool):
# for example for home-assistant
cd ~/.homeassistant
cp zwcfg_0xf5b17667.xml pyozw.sqlite zwscene.xml options.xml /tmp/zwave-core/-
locate (and determine) your openzwave installation (flavor), see at openzwave. For me, I prefer the system-wide as having open-zwave installed through my pacman-ager. So for me its:
/etc/openzwave -
check if your controller serial device (something like
/dev/ttyACM0) is writeable -
simply run:
cd /tmp/zwave-core
python zwave_core/start.py- start a browser and visit: 127.0.0.1:5000/frontend
Now to start the network, just make sure that the 4 input fields in the top left are correct.
Controller device /dev/ttyACM0, openzwave database directory /etc/openzwave, user-dir is our current workdir, where we copied the openzwave files to for safety: ..
Once done click "ON" in the top left corner and wait while watching the event-log being populated by the tasks the controller is executing...
ZWave-core shall---as the name suggests---be the core component for the interaction with Z-Wave devices and the network. Providing a highly transparent and accurate interface into the Z-Wave protocol and not hiding any detail. Using a REST API this transparency is delivered in a platform independent, easy accessible way.
A dynamic, web-based and reactive interface is exposing this REST API to the browser, serving as a clear window into the Z-Wave world. In order to transport the high dynamic of the Z-Wave network, websocket-based push is a must allowing the receiver side to not miss any information within the network with the smallest possible latency.
In contrast to this plain, bare-metal approach the major distinguishing feature will be the MQTT layer, which introduces a abstraction layer between any home-automation system and the Z-Wave network in order to seperate what does not belong together: physical and functional layers. While the former is deployable standalone, without prior knowledge of the surroundings despite the Z-Wave network itself, the latter has the freedom to not care about the physical layer at all and focus on the functional, end-user focussed challenges. So, in simple words zwave-core provides a Z-Wave to IP bridge allowing simplicity in Z-Wave management bridging the gap between WiFi and the ISM band.
| URL | Methods | Description |
|---|---|---|
| /net | GET | ... |
| /net/actions | GET | |
| /net/action/action | POST | |
| /net/ctrl/actions | GET | |
| /net/ctrl/action/action | POST | |
| /net/opts | GET,DELETE,PATCH,POST | |
| /net/signals | GET | |
| /nodes | GET | |
| /node/int:node_id | GET,PATCH | |
| /node/int:node_id/value/int:value_id | GET,POST | |
| /node/actions | GET | |
| /node/int:node_id/action/action | POST | |
| /toc | GET |
There are several ways to access the zwave nodes and entities.
zwave/raw/<node_id>/#will provide you an extensive list about all lan-devices, including c onfigs, read-only, ...homeassistant/<component type (e.g., sensor)>/<node_id>/state#'will be populated automaticly- there will later also be the option to change how a specific device/entity is exposed to the outer world (providing the means to realize fixes/abstraction, alredy within zwave-core to keep home-assistant free from unneeded clutter.
