Merge pull request #6 from arduino-libraries/name-clash-fix

Fix name clash of Color class

examples/RGBLED/RGBLED.ino

@@ -24,11 +24,11 @@ void pulseColors(RGBLED &led) {
     led.setColor({255, 0, 0});  // Red
     pulseLED(led);
 
-    // Color can be set via Color struct or 3 separate uint8_t values
+    // Color can be set via LEDColor struct or 3 separate uint8_t values
     led.setColor(0, 255, 0);  // Green
     pulseLED(led);
 
-    Color blueColor = {0, 0, 255};
+    LEDColor blueColor = {0, 0, 255};
     led.setColor(blueColor);  // Blue
     pulseLED(led);
 

src/RGBLED.cpp

@@ -23,11 +23,11 @@ bool RGBLED::setColor(uint8_t r, uint8_t g, uint8_t b, bool persist) {
     return true;
 }
 
-bool RGBLED::setColor(Color color, bool persist) {
+bool RGBLED::setColor(LEDColor color, bool persist) {
     return setColor(color.red, color.green, color.blue, persist);
 }
 
-Color RGBLED::color() {
+LEDColor RGBLED::color() {
     uint8_t red = readFromRegister<uint8_t>(RGB_LED_RED_REGISTER_INFO);
     uint8_t green = readFromRegister<uint8_t>(RGB_LED_GREEN_REGISTER_INFO);
     uint8_t blue = readFromRegister<uint8_t>(RGB_LED_BLUE_REGISTER_INFO);

src/RGBLED.h

@@ -3,7 +3,7 @@
 /**
  * @brief Represents a color with red, green, and blue components.
  */
-struct Color {
+struct LEDColor {
     uint8_t red;    /**< The red component of the color. */
     uint8_t green;  /**< The green component of the color. */
     uint8_t blue;   /**< The blue component of the color. */
@@ -57,21 +57,21 @@ class RGBLED : public I2CDevice {
     bool setColor(uint8_t r, uint8_t g, uint8_t b, bool persist = false);
 
     /**
-     * @brief Sets the RGB color of the LED using a Color object.
-     * The Color object contains the red, green, and blue values that can be changed individually.
+     * @brief Sets the RGB color of the LED using a LEDColor object.
+     * The LEDColor object contains the red, green, and blue values that can be changed individually.
      * Note: A value of 0, 0, 0 will set the color based on the IAQ value from the Indoor Air Quality sensor.
      * @param color The RGB color to set.
      * @param persist If true, the change will be saved to flash memory.
      * @return True if the color was set successfully, false otherwise.
      */
-    bool setColor(Color color, bool persist = false);
+    bool setColor(LEDColor color, bool persist = false);
 
     /**
      * @brief Gets the current RGB color of the LED.
      * 
-     * @return The current RGB color as a Color object.
+     * @return The current RGB color as a LEDColor object.
      */
-    Color color();
+    LEDColor color();
 
     /**
      * @brief Get the brightness of the RGB LED (0-255)

src/registers.h

@@ -16,8 +16,15 @@ constexpr RegisterInfo SLAVE_ADDRESS_REGISTER_INFO{0x01, "uint8", 1};
 constexpr RegisterInfo CONTROL_REGISTER_INFO{0x02, "uint8", 1};
 constexpr RegisterInfo ORANGE_LED_REGISTER_INFO{0x03, "uint8", 1};
 constexpr RegisterInfo RGB_LED_RED_REGISTER_INFO{0x04, "uint8", 1};
-constexpr RegisterInfo RGB_LED_GREEN_REGISTER_INFO{0x05, "uint8", 1};
-constexpr RegisterInfo RGB_LED_BLUE_REGISTER_INFO{0x06, "uint8", 1};
+
+/*
+According to the firmware design speciation the Green LED register is at address 0x05 
+and the Blue LED register is at address 0x06. However due to a different LED
+being used in the final design the addresses are swapped.
+*/
+constexpr RegisterInfo RGB_LED_BLUE_REGISTER_INFO{0x05, "uint8", 1};
+constexpr RegisterInfo RGB_LED_GREEN_REGISTER_INFO{0x06, "uint8", 1};
+
 constexpr RegisterInfo INTENSITY_REGISTER_INFO{0x07, "uint8", 1};
 constexpr RegisterInfo UART_CONTROL_REGISTER_INFO{0x08, "uint8", 1};
 constexpr RegisterInfo CSV_DELIMITER_REGISTER_INFO{0x09, "uint8", 1};