Project for animating and lighting up a scale model (Revell Shelby GT500 2010) with a raspberry pi
| Component | Voltage |
|---|---|
| Raspberry | 5V |
| Screen | 9V/12V |
| Electronic (with breadboard) | 9V |
| Button | Feature |
|---|---|
| POWER | Start/Stop the system |
| GALLERY | Display/Hide pictures gallery |
| AUDIO | Play GT500 engine sound samples |
| VIDEO | Play GT500 presentation video |
| LIGHT_01 | Head lights Tail lights Front position lights Side position lights Dashboard (+ License plate?) |
| LIGHT_02 | Fog lights |
| LIGHT_03 | Roof light Reverse lights |
| LIGHT_04 | Turn lights |
| LIGHT_04 | Turn lights |
|---|---|
| Fist press | Left front/tail turn indicator blinking (sequential light for rear lights) |
| Second press | Right front/tail turn indicator blinking (sequential light for rear lights) |
| Third press | Warning lights (all blinking at the same time) |
| Fourth press | All blinking off |
| POWER | Power lights |
|---|---|
| Lights up at boot | Plugged on serial port: TxD & RxD pins (GPIO 14 &15). Activation of UART mode needed (GPIO15 cannot be used as input/output anymore) |
| bit | Function of led | Nb of leds |
|---|---|---|
| 00 | Left head position/turn indicator | (x1) |
| 01 | Left tail turn indicator #1 | (x1) |
| 02 | Left tail turn indicator #2 | (x1) |
| 03 | Left tail turn indicator #3 | (x1) |
| 04 | Right head position/turn indicator | (x1) |
| 05 | Right tail turn indicator #1 | (x1) |
| 06 | Right tail turn indicator #2 | (x1) |
| 07 | Right tail turn indicator #3 | (x1) |
| 08 | Fog lights | (x2) |
| 09 | Head lights | (x2) |
| 10 | Tail light | (x6) |
| 11 | Side position lights | (x4) |
| 12 | License plate | (x2) |
| 13 | Dashboard | (x2) |
| 14 | Roof light | (x1) |
| 15 | Reverse lights | (x4) |
| BCM | Cobbler Pin | Function |
|---|---|---|
| gpio 02 (I2C : SDA) | SDA | I2C LCD screen |
| gpio 03 (I2C : SCL) | SCL | 'POWER' button "on" signal + I2C LCD screen |
| gpio 04 | P7 | 'POWER' button "off" signal |
| gpio 07 (SPI : CE1) | CE1 | 'LIGHT_2' button input signal |
| gpio 08 (SPI : CE0) | CE0 | 'LIGHT_1' button input signal |
| gpio 09 (SPI : MISO) | MISO | 'LIGHT_4' led output signal |
| gpio 10 (SPI : MOSI) | MOSI | 'LIGHT_4' button input signal |
| gpio 11 (SPI : CLK) | SCLK | 'LIGHT_3' button input signal |
| gpio 14 (UART : TXD) | TXD | 'POWER' led output signal |
| gpio 15 (UART : RXD) | RXD | NC (because of UART activated) |
| gpio 17 | P0 | Shift register SDI/SER |
| gpio 18 (PWM) | P1 | Shift register RCLK |
| gpio 22 | P3 | N/A |
| gpio 23 | P4 | 'AUDIO' button input signal |
| gpio 24 | P5 | 'VIDEO' button input signal |
| gpio 25 | P6 | 'GALLERY' button input signal |
| gpio 27 | P2 | Shift register SRCLK |
Power supply
GPIO input/output
Shift register
Led system
GPIO PCB
Shift register PCB
Smoke
Demo mode
Engine (phone vibrator)
Battery mode
Remote control (wifi/phone)