Update 'identical hostname' tests since the behavior has changed

Signed-off-by: Tomas Repel <[email protected]>

testsuite/tests/singlecluster/identical_hostnames/auth/conftest.py

@@ -0,0 +1,18 @@
+"""Conftest for "identical hostname" tests"""
+
+import pytest
+
+
+@pytest.fixture(scope="module")
+def authorization(authorization):
+    """1st 'allow-all' Authorization object"""
+    authorization.authorization.add_opa_policy("rego", "allow = true")
+    return authorization
+
+
+@pytest.fixture(scope="module")
+def rate_limit():
+    """
+    For these tests RateLimitPolicy is not required
+    """
+    return None

testsuite/tests/singlecluster/identical_hostnames/auth/test_identical_hostnames_auth_on_gw_and_route.py

@@ -0,0 +1,78 @@
+"""
+There used to be a limitation if using one HTTPRoute declaring the same hostname as parent Gateway related to AuthPolicy
+https://github.com/Kuadrant/kuadrant-operator/blob/c8d083808daff46772254e223407c849b55020a7/doc/auth.md#limitation-multiple-network-resources-with-identical-hostnames
+(second topology mentioned there)
+This test validates that it has been properly fixed, i.e. both AuthPolicies are fully and successfully enforced.
+"""
+
+import pytest
+
+from testsuite.kuadrant.policy import has_condition
+from testsuite.kuadrant.policy.authorization.auth_policy import AuthPolicy
+
+pytestmark = [pytest.mark.kuadrant_only]
+
+
+@pytest.fixture(scope="module")
+def authorization2(gateway, blame, cluster, label):
+    """2nd 'deny-all' Authorization object"""
+    auth_policy = AuthPolicy.create_instance(cluster, blame("authz2"), gateway, labels={"testRun": label})
+    auth_policy.authorization.add_opa_policy("rego", "allow = false")
+    return auth_policy
+
+
+@pytest.fixture(scope="module", autouse=True)
+def commit(request, authorization, authorization2):
+    """Ensure Authorizations are created"""
+    for auth in [authorization, authorization2]:
+        if auth is not None:
+            request.addfinalizer(auth.delete)
+            auth.commit()
+            auth.wait_for_accepted()
+
+    authorization.wait_for_ready()
+
+    # At this point the 'route2' has not been created yet so authorization2 is completely overridden by authorization1
+    authorization2.wait_until(has_condition("Enforced", "False", "Overridden")), (
+        f"'deny-all' AuthPolicy did not reach expected record status, instead it was: "
+        f"{authorization2.model.status.recordConditions}"
+    )
+
+
+def test_identical_hostnames_auth_on_gw_and_route(client, authorization, authorization2):
+    """
+    Tests that Gateway-attached AuthPolicy affects on 'route2' even if both 'route' and 'route2' declare identical
+    hostname and there is another AuthPolicy already successfully enforced on 'route'.
+    Setup:
+        - Two HTTPRoutes declaring identical hostnames but different paths: '/anything/route1' and '/anything/route2'
+        - 'allow-all' AuthPolicy enforced on the '/anything/route1' HTTPRoute
+        - 'deny-all' AuthPolicy (created after 'allow-all' AuthPolicy) enforced on the Gateway
+    Test:
+        - Send a request via 'route' and assert that response status code is 200 OK
+        - Send a request via 'route2' and assert that response status code is 403 Forbidden
+        - Delete the 'allow-all' AuthPolicy
+        - Send a request via both routes
+        - Assert that both response status codes are 403 (Forbidden)
+    """
+
+    # Verify that the GW-level 'deny-all' AuthPolicy is now only partially enforced ('route2' only). It is overridden
+    # for 'route1' by HTTPRoute-level 'allow-all' AuthPolicy
+    authorization2.wait_for_partial_enforced()
+
+    # Access via 'route' is allowed due to 'allow-all' AuthPolicy
+    response = client.get("/anything/route1/get")
+    assert response.status_code == 200
+
+    # 'deny-all' Gateway AuthPolicy affects route2
+    response = client.get("/anything/route2/get")
+    assert response.status_code == 403
+
+    # Deletion of 'allow-all' AuthPolicy should make the 'deny-all' Gateway AuthPolicy enforced on both routes
+    authorization.delete()
+    authorization2.wait_for_ready()
+
+    response = client.get("/anything/route2/get")
+    assert response.status_code == 403
+
+    response = client.get("/anything/route2/get")
+    assert response.status_code == 403

testsuite/tests/singlecluster/identical_hostnames/auth/test_identical_hostnames_auth_on_routes.py

@@ -0,0 +1,65 @@
+"""
+There used to be a limitation if using two HTTPRoutes declaring the same hostname related to AuthPolicy:
+https://github.com/Kuadrant/kuadrant-operator/blob/c8d083808daff46772254e223407c849b55020a7/doc/auth.md#limitation-multiple-network-resources-with-identical-hostnames
+(the first topology mentioned there)
+This test validates that it has been properly fixed, i.e. both AuthPolicies are fully and successfully enforced.
+"""
+
+import pytest
+
+from testsuite.kuadrant.policy.authorization.auth_policy import AuthPolicy
+
+pytestmark = [pytest.mark.kuadrant_only]
+
+
+@pytest.fixture(scope="module")
+def authorization2(route2, blame, cluster, label):
+    """2nd 'deny-all' Authorization object"""
+    auth_policy = AuthPolicy.create_instance(cluster, blame("authz2"), route2, labels={"testRun": label})
+    auth_policy.authorization.add_opa_policy("rego", "allow = false")
+    return auth_policy
+
+
+@pytest.fixture(scope="module", autouse=True)
+def commit(request, authorization, authorization2):
+    """Ensure Authorizations are created"""
+    for auth in [authorization, authorization2]:
+        if auth is not None:
+            request.addfinalizer(auth.delete)
+            auth.commit()
+            auth.wait_for_ready()
+
+
+def test_identical_hostnames_auth_on_routes(client, authorization):
+    """
+    Validate that 2nd AuthPolicy is fully enforced on 'route2' declaring identical hostname as 'route' when another
+    AuthPolicy already successfully enforced on 'route'.
+    Setup:
+        - Two HTTPRoutes declaring identical hostnames but different paths: '/anything/route1' and '/anything/route2'
+        - 'allow-all' AuthPolicy enforced on the '/anything/route1' HTTPRoute
+        - 'deny-all' AuthPolicy (created after 'allow-all' AuthPolicy) enforced on the '/anything/route2' HTTPRoute
+    Test:
+        - Send a request via 'route' and assert that response status code is 200 OK
+        - Send a request via 'route2' and assert that response status code is 403 Forbidden
+        - Delete the 'allow-all' AuthPolicy
+        - Send a request via both routes
+        - Assert that access via 'route' is still 200 (OK), deletion of 'allow-all' Authpolicy should have no effect
+        - Assert that access via 'route2' is still 403 (Forbidden)
+    """
+
+    response = client.get("/anything/route1/get")
+    assert response.status_code == 200
+
+    response = client.get("/anything/route2/get")
+    assert response.status_code == 403
+
+    # Deletion of 'allow-all' AuthPolicy
+    authorization.delete()
+
+    # Access via 'route' is still allowed because 'deny-all' AuthPolicy is not enforced on this route
+    response = client.get("/anything/route1/get")
+    assert response.status_code == 200
+
+    # Access via 'route2' is still not allowed due to 'deny-all' AuthPolicy being enforced on 'route2'
+    response = client.get("/anything/route2/get")
+    assert response.status_code == 403

testsuite/tests/singlecluster/identical_hostnames/rlp/conftest.py

@@ -0,0 +1,12 @@
+"""Conftest for "identical hostname" tests"""
+
+import pytest
+
+from testsuite.kuadrant.policy.rate_limit import Limit
+
+
+@pytest.fixture(scope="module")
+def rate_limit(rate_limit):
+    """Add limit to 1st RateLimitPolicy allowing 1 request per 10 seconds (a.k.a. '1rp10s' RateLimitPolicy)"""
+    rate_limit.add_limit("1rp10s", [Limit(1, "10s")])
+    return rate_limit

testsuite/tests/singlecluster/identical_hostnames/rlp/test_identical_hostnames_rlp_on_gw_and_route.py

@@ -0,0 +1,90 @@
+"""
+There used to be a limitation if using one HTTPRoute declaring the same hostname as parent Gateway related to RLP.
+https://github.com/Kuadrant/kuadrant-operator/blob/3b8e313d552090c52d8aadca95f6952f42a03192/doc/rate-limiting.md#limitation-multiple-network-resources-with-identical-hostnames
+(second topology mentioned there)
+This test validates that it has been properly fixed, i.e. both RateLimitPolicies (RLPs) are successfully enforced.
+"""
+
+from time import sleep
+import pytest
+
+from testsuite.kuadrant.policy import has_condition
+from testsuite.kuadrant.policy.rate_limit import RateLimitPolicy, Limit
+
+pytestmark = [pytest.mark.kuadrant_only]
+
+LIMIT = Limit(2, "10s")
+
+
+@pytest.fixture(scope="module")
+def rate_limit2(gateway, blame, cluster, label):
+    """2nd RateLimitPolicy object allowing 2 requests per 10 seconds (a.k.a. '2rp10s')"""
+    rlp = RateLimitPolicy.create_instance(cluster, blame("2rp10s"), gateway, labels={"testRun": label})
+    rlp.add_limit("2rp10s", [LIMIT])
+    return rlp
+
+
+@pytest.fixture(scope="module", autouse=True)
+def commit(request, rate_limit, rate_limit2):
+    """Ensure RLPs are created"""
+    for rlp in [rate_limit, rate_limit2]:
+        if rlp is not None:
+            request.addfinalizer(rlp.delete)
+            rlp.commit()
+            rlp.wait_for_accepted()
+
+    rate_limit.wait_for_ready()
+
+    # At this point the 'route2' has not been created yet so rate_limit2 is completely overridden by rate_limit
+    rate_limit2.wait_until(
+        has_condition("Enforced", "False", "Overridden")
+    ), f"'2pr10s' RLP did not reach expected record status, instead it was: {rate_limit2.model.status.recordConditions}"
+
+
+def test_identical_hostnames_rlp_on_gw_and_route(client, rate_limit, rate_limit2):
+    """
+    Tests that Gateway-attached RateLimitPolicy is enforced on 'route2' if both 'route' and 'route2' declare
+    identical hostname and there is another RateLimitPolicy already successfully enforced on 'route'.
+    Setup:
+        - Two HTTPRoutes declaring identical hostnames but different paths: '/anything/route1' and '/anything/route2'
+        - '1rp10s' RateLimitPolicy enforced on the '/anything/route1' HTTPRoute
+        - '2rp10s' RateLimitPolicy (created after '1pr10s' RateLimitPolicy) enforced on the Gateway
+    Test:
+        - Send requests via 'route' and assert that 429 is returned after one 200 OK
+        - Send a request via 'route2' and assert that 429 is returned after two 200s
+        - Delete the '1rp10s' RateLimitPolicy
+        - Send a request via both routes
+        - Assert that on both routes the 429s are returned after two 200s
+    """
+    # At this point route2 exists so the '2rp10s' RLP should not be overridden, should be partially enforced instead
+    rate_limit2.wait_for_partial_enforced()
+
+    # Access via 'route' is limited due to '1rp10s' RateLimitPolicy
+    response = client.get("/anything/route1/get")
+    assert response.status_code == 200
+    response = client.get("/anything/route1/get")
+    assert response.status_code == 429
+
+    # Access via 'route2' is limited due to '2rp10s' Gateway RateLimitPolicy
+    responses = client.get_many("/anything/route2/get", LIMIT.limit)
+    responses.assert_all(status_code=200)
+    response = client.get("/anything/route2/get")
+    assert response.status_code == 429
+
+    # Deletion of '1rp10s' RateLimitPolicy should make both routes rate-limited by '2pr10s' RLP.
+    # '2pr10s' RLP should get fully enforced (was: partially enforced)
+    rate_limit.delete()
+    rate_limit2.wait_for_ready()
+
+    # Wait for 15 seconds to make sure counter is reset
+    sleep(15)
+
+    responses = client.get_many("/anything/route1/get", LIMIT.limit)
+    responses.assert_all(status_code=200)
+    response = client.get("/anything/route1/get")
+    assert response.status_code == 429
+
+    responses = client.get_many("/anything/route2/get", LIMIT.limit)
+    responses.assert_all(status_code=200)
+    response = client.get("/anything/route2/get")
+    assert response.status_code == 429

testsuite/tests/singlecluster/identical_hostnames/rlp/test_identical_hostnames_rlp_on_routes.py

@@ -0,0 +1,79 @@
+"""
+There used to be a limitation if using one HTTPRoute declaring the same hostname as parent Gateway related to RLP.
+https://github.com/Kuadrant/kuadrant-operator/blob/3b8e313d552090c52d8aadca95f6952f42a03192/doc/rate-limiting.md#limitation-multiple-network-resources-with-identical-hostnames
+(the first topology mentioned there)
+This test validates that it has been properly fixed, i.e. both RateLimitPolicies (RLPs) are successfully enforced.
+"""
+
+from time import sleep
+import pytest
+
+from testsuite.kuadrant.policy.rate_limit import RateLimitPolicy, Limit
+
+
+pytestmark = [pytest.mark.kuadrant_only]
+
+LIMIT = Limit(2, "10s")
+
+
+@pytest.fixture(scope="module")
+def rate_limit2(route2, blame, cluster, label):
+    """2nd RateLimitPolicy allowing 2 requests per 10 seconds (a.k.a. '2rp10s' RateLimitPolicy)"""
+    rlp = RateLimitPolicy.create_instance(cluster, blame("2rp10s"), route2, labels={"testRun": label})
+    rlp.add_limit("2rp10m", [LIMIT])
+    return rlp
+
+
+@pytest.fixture(scope="module", autouse=True)
+def commit(request, rate_limit, rate_limit2):
+    """Ensure Authorizations are created"""
+    for rlp in [rate_limit, rate_limit2]:
+        if rlp is not None:
+            request.addfinalizer(rlp.delete)
+            rlp.commit()
+            rlp.wait_for_ready()
+
+
+def test_identical_hostnames_rlp_on_routes(client, rate_limit2):
+    """
+    Validates that 1st RateLimitPolicy is still enforced on 'route' declaring identical hostname as 'route2' if another
+    RateLimitPolicy got successfully enforced on 'route2' in the interim.
+    Setup:
+        - Two HTTPRoutes declaring identical hostnames but different paths: '/anything/route1' and '/anything/route2'
+        - '1rp10m' RateLimitPolicy enforced on the '/anything/route1' HTTPRoute
+        - '2rp10m' RateLimitPolicy (created after '1rp10s' RateLimitPolicy) enforced on the '/anything/route2' HTTPRoute
+    Test:
+        - Send a request via 'route' and assert that no 429s (Too Many Requests) are returned
+        - Send a request via 'route2' and assert that no 429s (Too Many Requests) are returned
+        - Delete the '2rp10s' RateLimitPolicy
+        - Send a request via both routes
+        - Assert that 429 is returned after single 200 (OK) for route1
+        - Assert that there are no 429s for 'route2'
+    """
+    # Access via 'route' is limited due to '1rp10s' RateLimitPolicy
+    # despite it reporting being successfully enforced
+    response = client.get("/anything/route1/get")
+    assert response.status_code == 200
+    response = client.get("/anything/route1/get")
+    assert response.status_code == 429
+
+    # Access via 'route2' is limited due to '2rp10s' RateLimitPolicy
+    responses = client.get_many("/anything/route2/get", LIMIT.limit)
+    responses.assert_all(status_code=200)
+    response = client.get("/anything/route2/get")
+    assert response.status_code == 429
+
+    # Deletion of '2rp10m' RateLimitPolicy
+    rate_limit2.delete()
+
+    # Access via 'route' should now be still limited via '1rp10s' RateLimitPolicy
+    # Wait for 15s to make sure the counter is reset
+    sleep(15)
+    response = client.get("/anything/route1/get")
+    assert response.status_code == 200
+    response = client.get("/anything/route1/get")
+    assert response.status_code == 429
+
+    # Access via 'route2' is now not limited at all
+    responses = client.get_many("/anything/route2/get", LIMIT.limit + 1)
+    responses.assert_all(status_code=200)