Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Compiling LibreRouter os #6

Open
darkdrgn2k opened this issue Jul 3, 2018 · 3 comments
Open

Compiling LibreRouter os #6

darkdrgn2k opened this issue Jul 3, 2018 · 3 comments

Comments

@darkdrgn2k
Copy link
Contributor

darkdrgn2k commented Jul 3, 2018 •
edited
Loading

To compile the os currently follow these steps

wget http://blog.altermundi.net/media/uploads/lime-sdk-LR.tar.bz
mkdir -p  /home/nicolas/OS_projects/lime-sdk-LR
cd /home/nicolas/OS_projects
wget http://blog.altermundi.net/media/uploads/lime-sdk-LR.tar.bz
tar xvf lime-sdk-LR.tar.bz
cd lime-sdk-LR
./cooker --update-communities --update-feeds
./cooker -b ar71xx/generic
./cooker -c ar71xx/generic --flavor=lime_default --profile=librerouter-v1
@darkdrgn2k
Copy link
Contributor Author

After building the image(openwrt-lime-default-ar71xx-generic-librerouter-v1-squashfs-sysupgrade.bin) I tried flashing it with LUCI and got the following error

The uploaded image file does not contain a supported format. Make sure that you choose the generic image format for your platform.

Trying to do the same via sysupgrade gave me a similar error

Passing the force argument wrote the image but the device would no longer boot.

Attaching a serial connection i saw this:


U-Boot 1.1.4 (Apr 19 2014 - 00:17:22)

ap135 - Scorpion 1.0DRAM:
sri
Scorpion 1.0
ath_ddr_initial_config(200): (32bit) ddr2 init
tap = 0x00000003
Tap (low, high) = (0x5, 0x1e)
Tap values = (0x11, 0x11, 0x11, 0x11)
128 MB
Top of RAM usable for U-Boot at: 88000000
Reserving 207k for U-Boot at: 87fcc000
Reserving 192k for malloc() at: 87f9c000
Reserving 44 Bytes for Board Info at: 87f9bfd4
Reserving 36 Bytes for Global Data at: 87f9bfb0
Reserving 128k for boot params() at: 87f7bfb0
Stack Pointer at: 87f7bf98
Now running in RAM - U-Boot at: 87fcc000
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18
flash size 16MB, sector count = 256
Flash: 16 MB
*** Warning *** : PCIe WLAN Module not found !!!
In:    serial
Out:   serial
Err:   serial
Net:   ath_gmac_enet_initialize...
athrs_sgmii_res_cal: cal value = 0x1
Fetching MAC Address from 0x87feea5c
Fetching MAC Address from 0x87feea5c
ath_gmac_enet_initialize: reset mask:c02200
Scorpion  ----> S17 PHY *
Vlan config...
s17 phy0 register value 0x00004140
TEST: FINAL REG VAL after TX Calibration - 0x4a000000
TEST: FINAL XMII VAL after RX Calibration - 0x4a000000
TEST: FINAL ETH_CFG VAL after RX Calibration - 0x00000001
athrs17_reg_init: complete
: cfg1 0x80000000 cfg2 0x7335
eth0: 00:03:7f:11:2e:d8
eth0 up
athrs17_reg_init_wan done
SGMII in forced mode
athr_gmac_sgmii_setup SGMII done
: cfg1 0x800c0000 cfg2 0x7214
eth1: 00:03:7f:11:2e:d9
eth1 up
eth0, eth1
Setting 0x18116290 to 0x50a0214f
Hit any key to stop autoboot:  0
## Booting image at 9fe80000 ...
   Image Name:   MIPS LEDE Linux-4.4.74
   Created:      2017-07-26  22:37:05 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1329392 Bytes =  1.3 MB
   Load Address: 80060000
   Entry Point:  80060000
   Verifying Checksum at 0x9fe80040 ...OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80060000) ...
## Giving linux memsize in bytes, 134217728

Starting kernel ...

[    0.000000] Linux version 4.4.74 (root@debian) (gcc version 6.3.0 (LEDE GCC 6.3.0 r4619-d72371e) ) #0 Wed Jul 26 22:37:05 2017
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 10000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] No valid device tree found, continuing without
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line:  board=HP5801 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(config),14528k(rootfs),1472k(kernel),64k(art),16000k@0x50000(firmware) console=ttyS0,115200 mem=256M rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 255088K/262144K available (2973K kernel code, 151K rwdata, 756K rodata, 272K init, 200K bss, 7056K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
[    0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
[    0.008274] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
[    0.071185] pid_max: default: 32768 minimum: 301
[    0.076192] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.083238] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092742] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.103249] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.110286] NET: Registered protocol family 16
[    0.116206] MIPS: machine is OEM Duo Band Wireless EVAL Board
[    0.122714] ar724x-pci ar724x-pci.0: PCIe link is down
[    0.128218] registering PCI controller with io_map_base unset
[    0.134440] registering PCI controller with io_map_base unset
[    0.587443] PCI host bridge to bus 0000:00
[    0.591845] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
[    0.599155] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.605087] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.612309] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.620856] PCI host bridge to bus 0000:01
[    0.625214] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff]
[    0.632547] pci_bus 0000:01: root bus resource [io  0x0001]
[    0.638476] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
[    0.645699] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[    0.654561] pci 0000:01:00.0: BAR 0: assigned [mem 0x12000000-0x1201ffff 64bit]
[    0.662378] pci 0000:01:00.0: BAR 6: assigned [mem 0x12020000-0x1202ffff pref]
[    0.670066] pci 0000:01:00.0: using irq 41 for pin 1
[    0.675991] clocksource: Switched to clocksource MIPS
[    0.682390] NET: Registered protocol family 2
[    0.687707] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.695149] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.701963] TCP: Hash tables configured (established 2048 bind 2048)
[    0.708796] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.715015] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.721922] NET: Registered protocol family 1
[    0.730005] Crashlog allocated RAM at address 0x3f00000
[    0.746302] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.752518] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.764954] io scheduler noop registered
[    0.769167] io scheduler deadline registered (default)
[    0.774863] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.781984] console [ttyS0] disabled
[    0.805849] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[    0.815032] console [ttyS0] enabled
[    0.815032] console [ttyS0] enabled
[    0.822450] bootconsole [early0] disabled
[    0.822450] bootconsole [early0] disabled
[    0.833405] m25p80 spi0.0: found w25q128, expected m25p80
[    0.838940] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.843738] 7 cmdlinepart partitions found on MTD device spi0.0
[    0.849752] Creating 7 MTD partitions on "spi0.0":
[    0.854610] 0x000000000000-0x000000030000 : "u-boot"
[    0.861389] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.868064] 0x000000040000-0x000000050000 : "config"
[    0.874330] 0x000000050000-0x000000e80000 : "rootfs"
[    0.880629] mtd: device 3 (rootfs) set to be root filesystem
[    0.886463] mtdsplit: no squashfs found in "rootfs"
[    0.891423] 0x000000e80000-0x000000ff0000 : "kernel"
[    0.897709] 0x000000ff0000-0x000001000000 : "art"
[    0.903734] 0x000000050000-0x000000ff0000 : "firmware"
[    0.922105] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
[    1.544301] libphy: ag71xx_mdio: probed
[    2.137499] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[    2.148841] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[    2.737619] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:SGMII
[    2.745456] NET: Registered protocol family 10
[    2.752998] NET: Registered protocol family 17
[    2.757617] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.770531] 8021q: 802.1Q VLAN Support v1.8
[    2.863356] jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    2.878943] VFS: Mounted root (jffs2 filesystem) readonly on device 31:3.
[    2.886780] Freeing unused kernel memory: 272K (8042c000 - 80470000)
[    2.893276] Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[    2.907395] Rebooting in 1 seconds..▒

@benhylau
Copy link
Member

benhylau commented Jul 4, 2018

Posting @darkdrgn2k's built artifacts here for reference:

-rw-r--r-- 1 root root    5209 Jul  3 13:22 openwrt-lime-default-ar71xx-generic-device-librerouter-v1.manifest
-rw-r--r-- 1 root root 4915204 Jul  3 13:22 openwrt-lime-default-ar71xx-generic-librerouter-v1-squashfs-sysupgrade.bin
-rw-r--r-- 1 root root 3801088 Jul  3 13:22 openwrt-lime-default-ar71xx-generic-root.squashfs
-rw-r--r-- 1 root root 1415759 Jul  3 13:22 openwrt-lime-default-ar71xx-generic-uImage-lzma.bin
-rwxr-xr-x 1 root root 4631084 Jul  3 13:22 openwrt-lime-default-ar71xx-generic-vmlinux.bin
-rwxr-xr-x 1 root root 4636208 Jul  3 13:22 openwrt-lime-default-ar71xx-generic-vmlinux.elf
-rw-r--r-- 1 root root 1441792 Jul  3 13:22 openwrt-lime-default-ar71xx-generic-vmlinux.lzma
-rwxr-xr-x 1 root root 1487352 Jul  3 13:22 openwrt-lime-default-ar71xx-generic-vmlinux-lzma.elf
-rw-r--r-- 1 user user    5227 Mar 15 21:49 openwrt-quintanalibre.org.ar-librerouter-ar71xx-generic-device-librerouter-v1.manifest
-rw-r--r-- 1 user user 5177348 Mar 15 21:49 openwrt-quintanalibre.org.ar-librerouter-ar71xx-generic-librerouter-v1-squashfs-sysupgrade.bin
-rw-r--r-- 1 user user 4063232 Mar 15 21:49 openwrt-quintanalibre.org.ar-librerouter-ar71xx-generic-root.squashfs
-rw-r--r-- 1 user user 1415759 Mar 15 21:48 openwrt-quintanalibre.org.ar-librerouter-ar71xx-generic-uImage-lzma.bin
-rwxr-xr-x 1 user user 4631084 Mar 15 21:48 openwrt-quintanalibre.org.ar-librerouter-ar71xx-generic-vmlinux.bin
-rwxr-xr-x 1 user user 4636208 Mar 15 21:48 openwrt-quintanalibre.org.ar-librerouter-ar71xx-generic-vmlinux.elf
-rw-r--r-- 1 user user 1441792 Mar 15 21:48 openwrt-quintanalibre.org.ar-librerouter-ar71xx-generic-vmlinux.lzma
-rwxr-xr-x 1 user user 1487352 Mar 15 21:48 openwrt-quintanalibre.org.ar-librerouter-ar71xx-generic-vmlinux-lzma.elf
-rw-r--r-- 1 user user    2100 Jul  3 13:22 sha256sums

@darkdrgn2k
Copy link
Contributor Author

darkdrgn2k commented Jul 4, 2018 •
edited
Loading

To boot an LibreMesh image correctly you need to change a U-Boot parameter.

To get into U-Boot connect a serial console

Header J4
1 - VCC (optional)
2 - RX (TX on your dongle)
3 - TX (RX on your dongle)
4 - Ground

Baud 115200

Press any key when prompted to at the beginning of the boot (or just press a key repeatedly)
You will see the U-Boot prompt
ath>

Run the following to set the parameters needed to boot

setenv bootargs "board=LIBREROUTERV1 console=ttyS0,115200"
savenev

For documentation only the ORIGINAL line was
bootargs=console=ttyS0,115200 root=31:02 rootfstype=squashfs init=/sbin/init mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1408k(uImage),8256k(mib0),64k(ART)

Flashing from U-Boot
If you need to flash your device from U-Boot.

  1. Connect a computer with a tftpd server to the device
  2. Set the computer's ip address to 192.168.1.10
  3. Connect a serial console to the device (see above)
  4. Place the Kernel and the Filesystem files from the output directory into the tftpd server
  5. Run these commands (one at a time dont copy and paste them all)
tftp 0x80060000 openwrt-lime-default-ar71xx-generic-root.squashfs
erase 0x9f050000 +0xE30000
cp.b 0x80060000 0x9f050000 $filesize

tftp 0x80060000 openwrt-lime-default-ar71xx-generic-uImage-lzma.bin
erase 0x9fE80000 +0x170000
cp.b 0x80060000 0x9fE80000 $filesize
  1. reboot but powercycling or entering reset

TFTPd
Windows you can use http://tftpd32.jounin.net/

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@benhylau @darkdrgn2k