Unopened zones reported as open

[aboulfad]

Very strange issue, not sure if its related to some funky panel wiring panel/config or dscKeyInterface.
If I open (contact switch) in Zone n, other zones are reported as open. Example below, I open then close Zone2, but other zones are reported as open ???

Another observation, various zones are reported as open regardless if I trigger one or not, it seems the panel is constantly reporting zones as open, i can't figure out why yet. Any pointers to debug this would be appreciated.

• Panel: PC1832
• dscKeybusInterface ver: (master)

status logfile

DSC Keybus Interface is online.
Keybus connected
Zone open: 7
Zone restored: 7
Zone open: 1
Zone restored: 1
Zone open: 3
Zone restored: 3
Zone open: 2
Zone restored: 2
Zone open: 3
Zone restored: 3
Zone open: 1
Zone restored: 1
Zone open: 7
Zone restored: 7

KeybusReader logfile

>>>> OPEN & CLOSE PATIO DOOR ZONE2
DSC Keybus Interface is online.
  497.55: 00100111 0 10000001 00000001 00000000 11000111 01000000 10110000 [0x27] Partition 1: Ready Backlight - Partition ready | Partition 2: disabled | Zones 1-8 open: 7 
  497.63: 00000101 0 10000001 00000010 00000000 11000111 00000000 11000111 00000000 11000111 [0x05] Partition 1: Ready Backlight - Stay/away zones open | Partition 2-4: Disabled
  500.86: 00100111 0 10000001 00000010 00000000 11000111 00000000 01110001 [0x27] Partition 1: Ready Backlight - Stay/away zones open | Partition 2: disabled | Zones 1-8 open: none
  500.94: 00000101 0 10000001 00000001 00000000 11000111 00000000 11000111 00000000 11000111 [0x05] Partition 1: Ready Backlight - Partition ready | Partition 2-4: Disabled
  510.43: 00100111 0 10000001 00000001 00000000 11000111 00000001 01110001 [0x27] Partition 1: Ready Backlight - Partition ready | Partition 2: disabled | Zones 1-8 open: 1 
  510.51: 00000101 0 10000001 00000010 00000000 11000111 00000000 11000111 00000000 11000111 [0x05] Partition 1: Ready Backlight - Stay/away zones open | Partition 2-4: Disabled
  511.69: 00100111 0 10000001 00000010 00000000 11000111 00000000 01110001 [0x27] Partition 1: Ready Backlight - Stay/away zones open | Partition 2: disabled | Zones 1-8 open: none
  511.77: 00000101 0 10000001 00000001 00000000 11000111 00000000 11000111 00000000 11000111 [0x05] Partition 1: Ready Backlight - Partition ready | Partition 2-4: Disabled
  512.17: 00100111 0 10000001 00000001 00000000 11000111 00000100 01110100 [0x27] Partition 1: Ready Backlight - Partition ready | Partition 2: disabled | Zones 1-8 open: 3 
  512.25: 00000101 0 10000001 00000010 00000000 11000111 00000000 11000111 00000000 11000111 [0x05] Partition 1: Ready Backlight - Stay/away zones open | Partition 2-4: Disabled
  514.79: 00100111 0 10000001 00000010 00000000 11000111 00000000 01110001 [0x27] Partition 1: Ready Backlight - Stay/away zones open | Partition 2: disabled | Zones 1-8 open: none
  514.86: 00000101 0 10000001 00000001 00000000 11000111 00000000 11000111 00000000 11000111 [0x05] Partition 1: Ready Backlight - Partition ready | Partition 2-4: Disabled
  515.63: 01100100 0 00001100 01110000 [0x64] Partition 1 | Beep: 6 beeps
  515.69: 00100111 0 10000001 00000001 00000000 11000111 00000010 01110010 [0x27] Partition 1: Ready Backlight - Partition ready | Partition 2: disabled | Zones 1-8 open: 2 
  515.77: 00000101 0 10000000 00000011 00000000 11000111 00000000 11000111 00000000 11000111 [0x05] Partition 1: Backlight - Zones open | Partition 2-4: Disabled
  523.96: 01100100 0 00001100 01110000 [0x64] Partition 1 | Beep: 6 beeps
  524.03: 00100111 0 10000000 00000011 00000000 11000111 00000000 01110001 [0x27] Partition 1: Backlight - Zones open | Partition 2: disabled | Zones 1-8 open: none
  524.11: 00000101 0 10000001 00000001 00000000 11000111 00000000 11000111 00000000 11000111 [0x05] Partition 1: Ready Backlight - Partition ready | Partition 2-4: Disabled
  529.40: 00100111 0 10000001 00000001 00000000 11000111 00000100 01110100 [0x27] Partition 1: Ready Backlight - Partition ready | Partition 2: disabled | Zones 1-8 open: 3 
  529.47: 00000101 0 10000001 00000010 00000000 11000111 00000000 11000111 00000000 11000111 [0x05] Partition 1: Ready Backlight - Stay/away zones open | Partition 2-4: Disabled
  532.32: 00100111 0 10000001 00000010 00000000 11000111 00000000 01110001 [0x27] Partition 1: Ready Backlight - Stay/away zones open | Partition 2: disabled | Zones 1-8 open: none
  532.40: 00000101 0 10000001 00000001 00000000 11000111 00000000 11000111 00000000 11000111 [0x05] Partition 1: Ready Backlight - Partition ready | Partition 2-4: Disabled
  533.11: 00100111 0 10000001 00000001 00000000 11000111 00000001 01110001 [0x27] Partition 1: Ready Backlight - Partition ready | Partition 2: disabled | Zones 1-8 open: 1 
  533.19: 00000101 0 10000001 00000010 00000000 11000111 00000000 11000111 00000000 11000111 [0x05] Partition 1: Ready Backlight - Stay/away zones open | Partition 2-4: Disabled
  535.48: 00100111 0 10000001 00000010 00000000 11000111 00000000 01110001 [0x27] Partition 1: Ready Backlight - Stay/away zones open | Partition 2: disabled | Zones 1-8 open: none
  535.56: 00000101 0 10000001 00000001 00000000 11000111 00000000 11000111 00000000 11000111 [0x05] Partition 1: Ready Backlight - Partition ready | Partition 2-4: Disabled
  543.23: 00100111 0 10000001 00000001 00000000 11000111 01000000 10110000 [0x27] Partition 1: Ready Backlight - Partition ready | Partition 2: disabled | Zones 1-8 open: 7 
  543.30: 11100110 0 00101100 00001000 00000000 00000000 00000000 00000000 00011010 [0xE6] Partition 4 | Enabled zones 33-64: none
  543.30: 11111111 1 ........ ........ 11111111 11111111 11111111 11111111 ........ [Keypad] [Digit]
  543.38: 00000101 0 10000001 00000010 00000000 11000111 00000000 11000111 00000000 11000111 [0x05] Partition 1: Ready Backlight - Stay/away zones open | Partition 2-4: Disabled
  546.70: 00100111 0 10000001 00000010 00000000 11000111 00000000 01110001 [0x27] Partition 1: Ready Backlight - Stay/away zones open | Partition 2: disabled | Zones 1-8 open: none
  546.78: 00000101 0 10000001 00000001 00000000 11000111 00000000 11000111 00000000 11000111 [0x05] Partition 1: Ready Backlight - Partition ready | Partition 2-4: Disabled

[aboulfad]

Oh man this is so funny or silly rather! I just figured it out. I have motion detectors in different areas, even when the system is not armed, the panel reports those zones as open when they are triggered.

I was sitting and not moving in my den working on my laptop watching the output of the status modified example (using OTA/MQTT) and as soon I'd get up, I see the status script report Zone 3 open which is the den IR detector :-)

I guess I need to move to the MQTT example to see what is reported, when and how!
PS: I can create a PR to contribute the modified status example file ?