Skip to content

Latest commit

 

History

History
283 lines (216 loc) · 11.4 KB

images.md

File metadata and controls

283 lines (216 loc) · 11.4 KB
Raw

WARNING WARNING WARNING WARNING WARNING

PLEASE NOTE: This document applies to the HEAD of the source tree

If you are using a released version of Kubernetes, you should refer to the docs that go with that version.

The latest 1.0.x release of this document can be found [here](http://releases.k8s.io/release-1.0/docs/user-guide/images.md).

Documentation for other releases can be found at releases.k8s.io.

Images

Each container in a pod has its own image. Currently, the only type of image supported is a Docker Image.

You create your Docker image and push it to a registry before referring to it in a Kubernetes pod.

The image property of a container supports the same syntax as the docker command does, including private registries and tags.

Table of Contents

Updating Images

The default pull policy is PullIfNotPresent which causes the Kubelet to not pull an image if it already exists. If you would like to always force a pull you must set a pull image policy of PullAlways or specify a :latest tag on your image.

Using a Private Registry

Private registries may require keys to read images from them. Credentials can be provided in several ways:

  • Using Google Container Registry
    • Per-cluster
    • automatically configured on Google Compute Engine or Google Container Engine
    • all pods can read the project's private registry
  • Configuring Nodes to Authenticate to a Private Registry
    • all pods can read any configured private registries
    • requires node configuration by cluster administrator
  • Pre-pulling Images
    • all pods can use any images cached on a node
    • requires root access to all nodes to setup
  • Specifying ImagePullSecrets on a Pod
    • only pods which provide own keys can access the private registry Each option is described in more detail below.

Using Google Container Registry

Kubernetes has native support for the Google Container Registry (GCR), when running on Google Compute Engine (GCE). If you are running your cluster on GCE or Google Container Engine (GKE), simply use the full image name (e.g. gcr.io/my_project/image:tag).

All pods in a cluster will have read access to images in this registry.

The kubelet kubelet will authenticate to GCR using the instance's Google service account. The service account on the instance will have a https://www.googleapis.com/auth/devstorage.read_only, so it can pull from the project's GCR, but not push.

Configuring Nodes to Authenticate to a Private Repository

Note: if you are running on Google Container Engine (GKE), there will already be a .dockercfg on each node with credentials for Google Container Registry. You cannot use this approach.

Note: this approach is suitable if you can control node configuration. It will not work reliably on GCE, and any other cloud provider that does automatic node replacement.

Docker stores keys for private registries in the $HOME/.dockercfg file. If you put this in the $HOME of root on a kubelet, then docker will use it.

Here are the recommended steps to configuring your nodes to use a private registry. In this example, run these on your desktop/laptop:

  1. run docker login [server] for each set of credentials you want to use.
  2. view $HOME/.dockercfg in an editor to ensure it contains just the credentials you want to use.
  3. get a list of your nodes
    • for example: nodes=$(kubectl get nodes -o template --template='{{range.items}}{{.metadata.name}} {{end}}')
  4. copy your local .dockercfg to the home directory of root on each node.
    • for example: for n in $nodes; do scp ~/.dockercfg root@$n:/root/.dockercfg; done

Verify by creating a pod that uses a private image, e.g.:

$ cat <<EOF > /tmp/private-image-test-1.yaml
apiVersion: v1
kind: Pod
metadata:
  name: private-image-test-1
spec:
  containers:
    - name: uses-private-image
      image: $PRIVATE_IMAGE_NAME
      command: [ "echo", "SUCCESS" ]
  imagePullPolicy: Always
EOF
$ kubectl create -f /tmp/private-image-test-1.yaml
pods/private-image-test-1
$

If everything is working, then, after a few moments, you should see:

$ kubectl logs private-image-test-1
SUCCESS

If it failed, then you will see:

$ kubectl describe pods/private-image-test-1 | grep "Failed"
  Fri, 26 Jun 2015 15:36:13 -0700	Fri, 26 Jun 2015 15:39:13 -0700	19	{kubelet node-i2hq}	spec.containers{uses-private-image}	failed		Failed to pull image "user/privaterepo:v1": Error: image user/privaterepo:v1 not found

You must ensure all nodes in the cluster have the same .dockercfg. Otherwise, pods will run on some nodes and fail to run on others. For example, if you use node autoscaling, then each instance template needs to include the .dockercfg or mount a drive that contains it.

All pods will have read access to images in any private registry once private registry keys are added to the .dockercfg.

This was tested with a private docker repository as of 26 June with Kubernetes version v0.19.3. It should also work for a private registry such as quay.io, but that has not been tested.

Pre-pulling Images

Note: if you are running on Google Container Engine (GKE), there will already be a .dockercfg on each node with credentials for Google Container Registry. You cannot use this approach.

Note: this approach is suitable if you can control node configuration. It will not work reliably on GCE, and any other cloud provider that does automatic node replacement.

Be default, the kubelet will try to pull each image from the specified registry. However, if the imagePullPolicy property of the container is set to IfNotPresent or Never, then a local image is used (preferentially or exclusively, respectively).

If you want to rely on pre-pulled images as a substitute for registry authentication, you must ensure all nodes in the cluster have the same pre-pulled images.

This can be used to preload certain images for speed or as an alternative to authenticating to a private registry.

All pods will have read access to any pre-pulled images.

Specifying ImagePullSecrets on a Pod

Note: This approach is currently the recommended approach for GKE, GCE, and any cloud-providers where node creation is automated.

Kubernetes supports specifying registry keys on a pod.

First, create a .dockercfg, such as running docker login <registry.domain>. Then put the resulting .dockercfg file into a secret resource. For example:

$ docker login
Username: janedoe
Password: ●●●●●●●●●●●
Email: [email protected]
WARNING: login credentials saved in /Users/jdoe/.dockercfg.
Login Succeeded

$ echo $(cat ~/.dockercfg)
{ "https://index.docker.io/v1/": { "auth": "ZmFrZXBhc3N3b3JkMTIK", "email": "[email protected]" } }

$ cat ~/.dockercfg | base64
eyAiaHR0cHM6Ly9pbmRleC5kb2NrZXIuaW8vdjEvIjogeyAiYXV0aCI6ICJabUZyWlhCaGMzTjNiM0prTVRJSyIsICJlbWFpbCI6ICJqZG9lQGV4YW1wbGUuY29tIiB9IH0K

$ cat > /tmp/image-pull-secret.yaml <<EOF
apiVersion: v1
kind: Secret
metadata:
  name: myregistrykey
data:
  .dockercfg: eyAiaHR0cHM6Ly9pbmRleC5kb2NrZXIuaW8vdjEvIjogeyAiYXV0aCI6ICJabUZyWlhCaGMzTjNiM0prTVRJSyIsICJlbWFpbCI6ICJqZG9lQGV4YW1wbGUuY29tIiB9IH0K
type: kubernetes.io/dockercfg
EOF

$ kubectl create -f /tmp/image-pull-secret.yaml
secrets/myregistrykey
$

If you get the error message error: no objects passed to create, it may mean the base64 encoded string is invalid. If you get an error message like Secret "myregistrykey" is invalid: data[.dockercfg]: invalid value ... it means the data was successfully un-base64 encoded, but could not be parsed as a dockercfg file.

This process only needs to be done one time (per namespace).

Now, you can create pods which reference that secret by adding an imagePullSecrets section to a pod definition.

apiVersion: v1
kind: Pod
metadata:
  name: foo
spec:
  containers:
    - name: foo
      image: janedoe/awesomeapp:v1
  imagePullSecrets:
    - name: myregistrykey

This needs to be done for each pod that is using a private registry. However, setting of this field can be automated by setting the imagePullSecrets in a serviceAccount resource.

Currently, all pods will potentially have read access to any images which were pulled using imagePullSecrets. That is, imagePullSecrets does NOT protect your images from being seen by other users in the cluster. Our intent is to fix that.

You can use this in conjunction with a per-node .dockerfile. The credentials will be merged. This approach will work on Google Container Engine (GKE).

Use Cases

There are a number of solutions for configuring private registries. Here are some common use cases and suggested solutions.

  1. Cluster running only non-proprietary (e.g open-source) images. No need to hide images.
  • Use public images on the Docker hub.
    • no configuration required
    • on GCE/GKE, a local mirror is automatically used for improved speed and availability
  1. Cluster running some proprietary images which should be hidden to those outside the company, but visible to all cluster users.
  • Use a hosted private Docker registry
    • may be hosted on the Docker Hub, or elsewhere.
    • manually configure .dockercfg on each node as described above
  • Or, run an internal private registry behind your firewall with open read access.
    • no Kubernetes configuration required
  • Or, when on GCE/GKE, use the project's Google Container Registry.
    • will work better with cluster autoscaling than manual node configuration
  • Or, on a cluster where changing the node configuration is inconvenient, use imagePullSecrets.
  1. Cluster with a proprietary images, a few of which require stricter access control
    • Move sensitive data into a "Secret" resource, instead of packaging it in an image.
    • DO NOT use imagePullSecrets for this use case yet.
  2. A multi-tenant cluster where each tenant needs own private registry
    • NOT supported yet.

Analytics