Unable to reach every 15 Minutes

[hohmannc85]

I am not sure since when there error exists, but today I regonized, that my Lupusec is not reachable every ca. 15 min for 5 minutes.
There is no reboot in this time (actually I can not see anything in the protocol of Lupusec).
meanwhile I tested to ping the lupus like under troubleshooting. when the adapter is not able to connect neither iobroker nor the Mac can ping lupus. its not possible to load lupus in the browser.

when I stop the adapter and ping all the time lupus no error appears!

I got a Lupus XT2. latest adapter.

lupusec.0	42256	2022-03-28 15:46:17.992	error	Poll rythmus chnaged to 15 seconds because of error!
lupusec.0	42256	2022-03-28 15:46:17.990	error	Error: Error in deviceGenericGet (/action/deviceListPSSGet) : RequestError: Error: connect EHOSTUNREACH 192.168.188.21:443
lupusec.0	42256	2022-03-28 15:40:18.281	info	Changing properties of object devices.RF:00427967
lupusec.0	42256	2022-03-28 15:40:18.201	info	Changing properties of object devices.RF:00427965
lupusec.0	42256	2022-03-28 15:40:18.112	info	Changing properties of object devices.RF:00427964
lupusec.0	42256	2022-03-28 15:40:18.049	info	Changing properties of object devices.RF:00427963
lupusec.0	42256	2022-03-28 15:40:17.987	info	Changing properties of object devices.RF:00427962
lupusec.0	42256	2022-03-28 15:40:17.924	info	Changing properties of object devices.RF:00427961

I already increased polling intervals!

[schmupu]

Which lupusec adapter version do you use?

[hohmannc85]

v1.3.6

I found out, that the does not appear as soon I deactivated yahka!

So this seem no be the reason!

[hohmannc85]

hmm as soon I start yahka even without any links to lupusec I get this error...

[schmupu]

Did you change something in the configuration of the yahka or lupusec adapter?
Please check, if both adapter do not use the same ip addresses, hostnames or ports on which they are listening.

[hohmannc85]

I switched my system to a 64 bit raspOS.
I did not change anything else in the config.
lupus adapter is working with the ip of lupusec and port 443
yahka not,

[schmupu]

I changed a lot in version 2.0.0. Ich hope it will work with this version.