cura-build

This repository contains build scripts used to build Cura and all dependencies from scratch.

OS X

1. Install CMake (available via homebrew or cmake.org)
2. Install latest version of Xcode.
3. On Mac OS X > 10.10, execute command: brew link openssl --force
4. Because Fortran is necessary: brew install gcc
5. Run these commands:

git clone [email protected]:Ultimaker/cura-build.git
cd cura-build
mkdir build
cd build
cmake ..
make

Windows

On Windows, the following dependencies are needed for building:

• git for windows (https://git-for-windows.github.io/)
  • The git command should be available on your %PATH%. Make sure that the cmd directory in the git for windows installation directory is on the %PATH% and not its bin directory, otherwise mingw32 will complain about sh.exe being on the path.
• CMake (http://www.cmake.org/)
  • Once CMake is installed make sure it is available on your %PATH%. Check this by running cmake --version in the Windows console.
• MinGW-W64 >= 4.9.04 (https://wiki.qt.io/MinGW-64-bit)
  • Once installed, its bin directory should be available on your %PATH%. Test this by running mingw32-make --version in the Windows console.
  • MinGW can be installed on different ways, but these were tested (without guarentees):
    • MinGW w64 installer (32-/64bit): Install the correct target architecture and make sure you choose:
      • Version := 4.9.3
      • Architecture := i686 (here for 32bit)
      • Threads := posix
      • Exception := dwarf
      • Build revision := 1
    • Qt5 Installer (32bit only): You can install "MinGW 4.9.2" using their "Maintenance Tool" as a component from the category "Tools"
    • When looking for other resources, make sure you download the posix flavour of MinGW. It is the only version, which is C++11 compatible (for more info take a look at the Qt docs).
• Python 3.5 (http://python.org/)
  • NOTE: using Python 3.5 is currently untested on Windows
• NumPy (http://www.lfd.uci.edu/~gohlke/pythonlibs/#numpy)
  • NOTE: make sure to get the NON-MKL version!
• SciPy (http://www.lfd.uci.edu/~gohlke/pythonlibs/#scipy)
• Py2Exe (https://pypi.python.org/pypi/py2exe/0.9.2.0/#downloads)
  • The easiest way to install this is to run the command pip install py2exe. The executable build_exe.exe should now be in your <python dir>/Scripts directory. You may have to add <python dir>/Scripts to you %PATH%.
• Numpy-STL (https://pypi.python.org/pypi/numpy-stl)
  • Also the easiest way to install is via pip3 install stl.
• Numpy-STL (https://pypi.python.org/pypi/zeroconf)
  • Again the easiest way to install is via pip3 install zeroconf.
• Microsoft Visual Studio 2015 (community edition): Go to "custom installation" and choose:
  • Programming languages:
    • Visual c++ (all)
    • Python Tools for Visual Studio (Nov 2015)
  • Windows & Web Development:
    • Universal Windows App Development Tools:
      • Tools 1.2
      • Windows 10 SDK 10.0.10586
      • Windows 10 SDK 10.0.10240
• NSIS 3 (http://nsis.sourceforge.net/Main_Page)
  • This application is neeeded to create the installer

Make sure these dependencies are available from your path.

Additionally, for 32-bit builds:

• Perl (http://www.activestate.com/activeperl, Required to build Qt)
• Create in the user directory a file named pydistutils.cfg with the following contents:

[build]
compiler=mingw32

For 64-bit builds:

• PyQt 5.4 (https://riverbankcomputing.com/software/pyqt/download5, Building PyQt currently fails using MinGW 64-bit)
• Install protobuf.wheel found in cura-build-binaries (TODO: create cura-build-binaries repo)
• Create empty __init__.py in c:\Python34\Lib\site-packages\google (TODO: make it part of the proto.wheel installation)

REM 32-bit
git clone [email protected]:Ultimaker/cura-build.git
cd cura-build
mkdir build
cd build
..\env_win32.bat
cmake -G "MinGW Makefiles" ..
mingw32-make
mingw32-make package

REM 64-bit
git clone [email protected]:Ultimaker/cura-build.git
cd cura-build
mkdir build
cd build
..\env_win64.bat
cmake -G "MinGW Makefiles" -DBUILD_64BIT:BOOL=ON ..
mingw32-make
mingw32-make package

Before make package - copy arduino to cura-build/

Ubuntu/Linux

cura-build can build Ubuntu/Debian packages of Cura.

Dependencies:

• python3 (>= 3.5.0)
• python3-dev (>= 3.5.0)
• python3-pyqt5 (>= 5.6.0)
• python3-pyqt5.qtopengl (>= 5.6.0)
• python3-pyqt5.qtquick (>= 5.6.0)
• python3-pyqt5.qtsvg (>= 5.6.0)
• python3-numpy (>= 1.8.0)
• python3-serial (>= 2.6)
• python3-opengl (>= 3.0)
• python3-setuptools
• python3-dev
• qml-module-qtquick2 (>= 5.6.0)
• qml-module-qtquick-window2 (>= 5.6.0)
• qml-module-qtquick-layouts (>= 5.6.0)
• qml-module-qtquick-dialogs (>= 5.6.0)
• qml-module-qtquick-controls (>= 5.6.0)
• libxcb1-dev
• libx11-dev
• zlib1g
• build-essential
• pkg-config
• cmake
• gfortran

To build, make sure these dependencies are installed, then clone this repository and run the following commands from your clone:

sudo apt-get install gfortran python3 python3-dev python3-pyqt5 python3-pyqt5.qtopengl python3-pyqt5.qtquick python3-pyqt5.qtsvg python3-numpy python3-serial python3-opengl python3-setuptools qml-module-qtquick2 qml-module-qtquick-window2 qml-module-qtquick-layouts qml-module-qtquick-dialogs qml-module-qtquick-controls gfortran pkg-config libxcb1-dev libx11-dev
git clone http://github.com/Ultimaker/cura-build.git
cd cura-build

mkdir build
cd build
cmake ..
make
make package

CentOS/Linux

cura-build can build CentOS/RHEL packages of Cura.

Dependencies:

• gcc-gfortran
• python34.x86_64
• python34-devel.x86_64
• python34-numpy.x86_64
• pyserial.noarch
• PyOpenGL.noarch
• python34-setuptools.noarch
• wxPython.x86_64
• libstdc++-static.x86_64
• libstdc++-devel.x86_64
• openssl.x86_64
• openblas-devel.x86_64
• python34-numpy-f2py.x86_64

To build, make sure these dependencies are installed, then clone this repository and run the following commands from your clone:

sudo yum install gcc-gfortran python34.x86_64 python34-devel.x86_64 python34-numpy.x86_64 pyserial.noarch PyOpenGL.noarch python34-setuptools.noarch wxPython.x86_64 libstdc++-static.x86_64 libstdc++-devel.x86_64 openssl.x86_64 openblas-devel.x86_64 python34-numpy-f2py.x86_64

1. download and install scipy from https://github.com/scipy/scipy/releases be sure to use python 3.5, eg. using sudo python3 setup.py 2. install (version in repository is for python 2.7)
2. download and install CMake from https://cmake.org/download/ and configure CMake to use ssl
3. download and install Qt5 from https://www.qt.io/download/
4. download and install PyQt5 from https://www.riverbankcomputing.com/software/pyqt/download5
5. download and install sip from https://www.riverbankcomputing.com/software/sip/download make sure the verion is 4.18 or newer

Alternative method for installing python at: https://edwards.sdsu.edu/research/installing-python3-4-and-the-scipy-stack-on-centos/ . Make sure, that the PYTHONPATH can find dist-packages.

git clone http://github.com/Ultimaker/cura-build.git
cd cura-build

mkdir build
cd build
cmake ..
make
make package