Converts HTTP URL query string parameters to MongoDB criteria, consisting of filter, sort, limit and skip parameters. The query string parameters follow a very easy-to-understand and easy-to-implement convention.
This can be used to handle REST API queries, or even regular GETs returning HTML pages that deal with a filtered and paginated display of the contents of a collection as a table.
A request of the form:
/api/v1/employees?name=John&age__lte=45&category__in=A,B&__limit=10&__sort=-age
Is translated to:
{
filter: {
name: 'John',
age: {$lte: 45},
category: {$in: ['A','B']},
},
sort: {
age: -1
},
limit: 10,
offset: 0
}Where the filter and sort can be directly used as a MongoDB query filter and sort specification.
$ npm install query-params-mongo
var qpm = require('query-params-mongo');
var mongodb = require('mongodb');
var processQuery = qpm({
autoDetect: [{ fieldPattern: /_id$/, dataType: 'objectId' }],
converters: {objectId: mongodb.ObjectID}
});
...
app.get('/api/v1/employees', function(req, res) {
try {
var query = processQuery(req.query,
{name: {dataType: 'string', required: false}},
true
);
} catch (errors) {
res.status(500).send(errors);
}
mongodb.MongoClient.connect('mongodb://localhost:27017/mydb', function(err, db) {
var cursor = db.collection('employees').find(query.filter)
.sort(query.sort).skip(query.offset).limit(query.limit);
...
});
});var qpm = require('query-params-mongo');
var processQuery = qpm(options)To start off, we need to create a processor (a function) that can process the request query. You can create as many processors as you like, but typically, your app will use only one. The behaviour of the processor can be controlled using the options supplied to the creator function.
-
autoDetect: An array of custom data-types that can be auto-detected, over and above the native data-types supported. Each auto-detect spec has the following properties:
- valuePattern: A regex pattern. If the value matches this pattern, it is detected as the given data-type.
- fieldPattern: A regex pattern. If the field name matches this pattern, it is detected as the given data-type.
- dataType: the data-type identifier, this can be a native data-type or a custom data-type.
At least one of fieldPattern and valuePattern must be specified. If both are specified, the valuePattern is tested first. To get the opposite behaviour, define it as two separate auto-detect specs, with the fieldPattern spec preceding the valuePattern one. The first spec in the array that matches will be used.
-
converters: A dictionary of non-native (custom) data-type converters.
- key: string identifier of the data-type
- value: a function to which a value string needing conversion is passed, returning the converted value, or undefined if the value could not be converted.
The auto-detect specs and the converters are added to a built-in set of auto-detect specs and
converters, which work on the native data types. Native data-types are
string, int, float, bool and date.
Whereas converters can be overridden (like using a custom converter to replace the built-in
converter for the data data-type), auto-detects cannot be overridden. Custom auto-detects
will take precendence over the built-in ones, though. The best way to assuredly specify the
data-type of a field is to specify it in the field specs.
var q = processQuery(query, fieldSpec, strict)- query: Request Query object. Note that this is not the query string, it is instead the parsed query object, the same that can be found in the req.query object of express. If you have only the query-string, you could parse it using node's built-in querystring.parse() function to get the parsed request query object.
- fieldSpec (Optional) Dictionary describing the fields, especially the data types of each field.
- key: field name
- value: An object with the following properties:
- dataType: the data type identifier.
- required: true/false
- strict (Optional) Boolean value to indicate whether to consider the fieldSpec as a complete spec, i.e., if field names not specified in the fieldSpec are encountered, it will be considered an error. Defaults to false.
In cases where the client is not a controlled one, e.g., you are publishing a REST API for someone else's consumption, you would typically specify the complete fieldSpec and set strict to true. This will ensure that the caller is notified of errors due to possible typos in their field names.
If the client is your own, e.g., your own application, you may be confident that there are no typos in the field names in the query string. In this case, you may prefer the convenience of auto-detect over formal fields specification. In this case, the field spec can contain only the fields that cannot be auto-detected. But be warned that adding a filter on a non-existant field (caused by typos) will typically match no records.
The query format is designed to be simple for simple use-cases, as well as completely readable in the browser's URL (i.e, contains no characters that will need URL encoding). If you have an HTML form, it is very likely that the query-string created out of this form's submission can be directly processed.
The query format follows these rules:
- All query parameters not starting with a double underscore ('__') are assumed to be field names
- Special query parameters __sort, __limit and __offset are treated specially, and these indicate the sort spec, the limit of the output and the offset (skip) criteria for the Mongo query.
- Any other query parameter that starts with a double underscore is ignored. You may use these for special handling that is not covered by this module.
In the most simplistic form, <field>=<value> in the query translates to an equals filter, for example name=John translates to a {name: 'John'} query filter specification.
To use other operators instead of the default equals operator, the operator specification is joined with the field name using double-underscores. For example, age__lt=50 translates to {age: {$lt: '50'}}. An eq operator can be forced as in name__eq=John in the previous example for clarity, but it adds no special value.
Supported operators which have the same meaning as the MongoDB Query operators are:
eq, ne, gt, gte, lt, lte, in, nin, all, exists
Other special operators supported are:
sw, swin, isw, iswin : starts-with, starts-with-in (multiple values), ignore-case variants of the same
co, coin, ico, icoin : contains, contains-in (multiple values), ignore-case variants
re, rein, ire, irein : regular-expression, regular-expression in (mutliple values), ignore-case variants
eqa: equals-array
The value is converted to an array by splitting it on a comma, if the operator
indicates that it requires mulitple values (all in operators, the all operator and
the eqa operator).
If multiple values are given for the same field, the value is considered an array, regardless of the operator type.
Values are parsed and converted to an appropriate data-type, which could be auto-detected or explicitly specified in the field spec.
In the examples below, the original query string is shown rather than the parsed query object. This is for readability, do ensure that the querystring is parsed before passing to processQuery.
name=John->{name: 'John'}Simple equality operator.age__lt=50&age__gt=10->{age: {$lt: 50, $gt: 10}}Multiple conditions on same field.
age__lt=50, {age: {dataType: 'string'}}->{age: {$lt: '50'}}Explicitly specified data-type overrides the auto-detected data-type.
priority=P1,P2->{priority: 'P1,P2'}This is probably not what you want.priority__in=P1,P2->{priority: {$in: ['P1','P2']}}The in operator caused the value to be split on comma.priority__in=P1&priority__in=P2->{priority: {$in: ['P1','P2']}}This is another way of specifying multiple values.priority=P1&priority=P2->{priority: ['P1','P2']}Probably not what you want, unless priority is an array field and you need an exact comparison.
Array fields are treated no different from regular fields, as the processor does not know about Array fields. The operator and/or explicitly specified multiple values affects the formation of the filter, so the following examples give you a hint of what you should be doing, assuming tags is an array field in the MongoDB collection.
tags=javascript->{tags: 'javascript'}One of the tags is 'javascript', that's how MongoDB interprets this filter.tags__in=javascript->{tags: {$in: ['javascript']}}, Same effect as the previous example, but a lot more explicit.tags__in=javascript,ecmascript->{tags: {$in: ['javascript', 'ecmascript']}}Matches if tags contains either of the values.tags=javascript,ecmascript->{tags: 'javascript,ecmascript'}This is not what is intended, which is why explicitly using__inis required, when comma separated multiple values are expected.tags=javascript&tags=ecmascript->{tags: ['javascript','ecmascript']}This is an exact array match, the value of tags must be exactly the two-element array.tags__eqa=javascript,ecmascript->{tags: ['javascript','ecmascript']}The eqa operator keeps the MongoDB operator as eq, but forces a comma-split on the value. This is another way of specifying an exact array match, but more convenient.tags__all=javascript,ecmascript->{tags: {$all: ['javascript','ecmascript']}}The value of tags must contain both the values.
The query format is designed in a manner such that there is no additional javascript processing required at the time of a form submission.
<form>
<label>Minimum age: </label>
<input name='age__gte' type='text' value='10'>
<label>Priority: </label>
<select name='priority'>
<option selected>P1</option>
<option>P2</option>
<option>P3</option>
</select>
<label>Status: </label>
<select name='status__in' multiple>
<option selected>New</option>
<option selected>Open</option>
<option>Closed</option>
</select>
<label>Severity: </label>
<select name='severity__in'>
<option>Critical</option>
<option selected value='Critical,High'>High and above</option>
<option value='Critical,High,Med'>Medium and above</option>
<option value='Critical,High,Med,Low'>Low and above</option>
</select>
<input type='submit' value='Submit'>
</form>When submitted, the above form will result in a query string like this:
age_gte=10&priority=P1&status__in=New&status__in=Open&severity__in=Critical,High
In AngularJS, it is customary to use two-way binding of form inputs to scope variables. In this case also, the processing required for generating the query string is very minimal.
HTML:
<form>
<label>Minimum age: </label>
<input ng-model='params.age__gte' type='text' value='10'>
<label>Priority: </label>
<select ng-model='params.priority'>
<option selected>P1</option>
<option>P2</option>
<option>P3</option>
</select>
<label>Status: </label>
<select ng-model='params.status__in' multiple>
<option selected>New</option>
<option selected>Open</option>
<option>Closed</option>
</select>
<label>Severity: </label>
<select ng-model='params.severity__in'>
<option>Critical</option>
<option selected value='Critical,High'>High and above</option>
<option value='Critical,High,Med'>Medium and above</option>
<option value='Critical,High,Med,Low'>Low and above</option>
</select>
<button ng-click='submit()'>Submit</submit>
</form>As compared to a conventional form, you can see that name is now replaced by ng-model.
Also, there is a params. prefix to the field names so that the form values are stored
as properties of a variable named params in the scope -- just for convenience, as you
will see below in a sample submit() function.
$scope.submit = function() {
$http.get("/api/v1/employees", {params: $scope.params}).then(function(response) {
$scope.employees = response.data;
// the rest is angular magic
});
}The filter is intended to be simplistic, and is an and combination of each individual query parameter filter. Or is indirectly supported via the in operator and variants, but a higher level or combination of comparisons of the form (age > 30 || num_years < 3) is not supported.
In most cases, this limitation is acceptable. In cases where this is not, a workaround is to call your API twice, once with each part of the or condition and combine the results in the client.
Future versions of the module may support this by adding a prefix/suffix to all fields that constitute one sub-clause of an or condition like so:
age__gt=30&age__lt=40&.1__num_years__gt=3&.1__num_years__lt=5, which will result in
(age > 30 && age < 40) || (num_years > 3 && num_years < 5)
The list of fields to be returned cannot be specified. The parameter __fields is reserved for this purpose, and future versions may use this as required.
Since the double-underscore is a special sequence used for separating the field name and the operator, we won't be able to handle field names that really have __ in them. Future versions may do some escaping to be able to handle this.