NAME

nkf - Network Kanji Filter

SYNOPSIS

nkf [-butjnesliohrTVvwWJESZxXFfmMBOcdILg] [file ...]

DESCRIPTION

Nkf is a yet another kanji code converter among networks, hosts and terminals. It converts input kanji code to designated kanji code such as ISO-2022-JP, Shift_JIS, EUC-JP, UTF-8, UTF-16 or UTF-32.

One of the most unique faculty of nkf is the guess of the input kanji encodings. It currently recognizes ISO-2022-JP, Shift_JIS, EUC-JP, UTF-8, UTF-16 and UTF-32. So users needn't set the input kanji code explicitly.

By default, X0201 kana is converted into X0208 kana. For X0201 kana, SO/SI, SSO and ESC-(-I methods are supported. For automatic code detection, nkf assumes no X0201 kana in Shift_JIS. To accept X0201 in Shift_JIS, use -X, -x or -S.

OPTIONS

• -J -S -E -W -W16 -W32 -j -s -e -w -w16 -w32

Specify input and output encodings. Upper case is input. cf. --ic and --oc.

- __-J__

ISO-2022-JP (JIS code).

- __-S__

Shift_JIS and JIS X 0201 kana.
EUC-JP is recognized as X0201 kana. Without __-x__ flag,
JIS X 0201 Katakana (a.k.a.halfwidth kana) is converted into JIS X 0208.
If you use Windows, see Windows-31J (CP932).

- __-E__

EUC-JP.

- __-W__

UTF-8N.

- __-W16[BL][0]__

UTF-16.
B or L gives whether Big Endian or Little Endian.
0 gives whether put BOM or not.

- __-W32[BL][0]__

UTF-32.
B or L gives whether Big Endian or Little Endian.
0 gives whether put BOM or not.

• -b -u

Output is buffered (DEFAULT), Output is unbuffered.

• -t

No conversion.

• -i[@B]

Specify the escape sequence for JIS X 0208.

- __-i@__

Use ESC ( @. (JIS X 0208-1978)

- __-iB__

Use ESC ( B. (JIS X 0208-1983/1990 DEFAULT)

• -o[BJ]

Specify the escape sequence for US-ASCII/JIS X 0201 Roman. (DEFAULT B)

• -r

{de/en}crypt ROT13/47

- __-h[123] --hiragana --katakana --katakana-hiragana__
- __-h1 --hiragana__

Katakana to Hiragana conversion.

- __-h2 --katakana__

Hiragana to Katakana conversion.

- __-h3 --katakana-hiragana__

Katakana to Hiragana and Hiragana to Katakana conversion.

• -T

Text mode output (MS-DOS)

• -f[m [- n]]

Folding on m length with n margin in a line. Without this option, fold length is 60 and fold margin is 10.

• -F

New line preserving line folding.

• -Z[0-3]

Convert X0208 alphabet (Fullwidth Alphabets) to ASCII.

- __-Z -Z0__

Convert X0208 alphabet to ASCII.

- __-Z1__

Convert X0208 kankaku to single ASCII space.

- __-Z2__

Convert X0208 kankaku to double ASCII spaces.

- __-Z3__

Replacing fullwidth >, <, ", & into '&gt;', '&lt;', '&quot;', '&amp;' as in HTML.

• -X -x

With -X or without this option, X0201 is converted into X0208 Kana. With -x, try to preserve X0208 kana and do not convert X0201 kana to X0208. In JIS output, ESC-(-I is used. In EUC output, SS2 is used.

• -B[0-2]

Assume broken JIS-Kanji input, which lost ESC. Useful when your site is using old B-News Nihongo patch.

- __-B1__

allows any chars after ESC-( or ESC-$.

- __-B2__

force ASCII after NL.

• -I

Replacing non iso-2022-jp char into a geta character (substitute character in Japanese).

• -m[BQN0]

MIME ISO-2022-JP/ISO8859-1 decode. (DEFAULT) To see ISO8859-1 (Latin-1) -l is necessary.

- __-mB__

Decode MIME base64 encoded stream. Remove header or other part before
conversion. 

- __-mQ__

Decode MIME quoted stream. '_' in quoted stream is converted to space.

- __-mN__

Non-strict decoding.
It allows line break in the middle of the base64 encoding.

- __-m0__

No MIME decode.

• -M

MIME encode. Header style. All ASCII code and control characters are intact.

- __-MB__

MIME encode Base64 stream.
Kanji conversion is performed before encoding, so this cannot be used as a picture encoder.

- __-MQ__

Perform quoted encoding.

• -l

Input and output code is ISO8859-1 (Latin-1) and ISO-2022-JP. -s, -e and -x are not compatible with this option.

• -L[uwm] -d -c

Convert line breaks.

- __-Lu -d__

unix (LF)

- __-Lw -c__

windows (CRLF)

- __-Lm__

mac (CR)

Without this option, nkf doesn't convert line breaks.

• --fj --unix --mac --msdos --windows

Convert for these systems.

• --jis --euc --sjis --mime --base64

Convert to named code.

• --jis-input --euc-input --sjis-input --mime-input --base64-input

Assume input system

• --ic=input codeset --oc=output codeset

Set the input or output codeset. NKF supports following codesets and those codeset names are case insensitive.

- ISO-2022-JP

a.k.a. RFC1468, 7bit JIS, JUNET

- EUC-JP (eucJP-nkf)

a.k.a. AT&T JIS, Japanese EUC, UJIS

        - eucJP-ascii
    - eucJP-ms
- CP51932

Microsoft Version of EUC-JP.

- Shift_JIS

a.k.a. SJIS, MS_Kanji

- Windows-31J

a.k.a. CP932

- UTF-8

same as UTF-8N

- UTF-8N

UTF-8 without BOM

- UTF-8-BOM

UTF-8 with BOM

- UTF8-MAC (input only)

decomposed UTF-8

- UTF-16

same as UTF-16BE

- UTF-16BE

UTF-16 Big Endian without BOM

- UTF-16BE-BOM

UTF-16 Big Endian with BOM

- UTF-16LE

UTF-16 Little Endian without BOM

- UTF-16LE-BOM

UTF-16 Little Endian with BOM

- UTF-32

same as UTF-32BE

- UTF-32BE

UTF-32 Big Endian without BOM

- UTF-32BE-BOM

UTF-32 Big Endian with BOM

- UTF-32LE

UTF-32 Little Endian without BOM

- UTF-32LE-BOM

UTF-32 Little Endian with BOM

• --fb-{skip, html, xml, perl, java, subchar}

Specify the way that nkf handles unassigned characters. Without this option, --fb-skip is assumed.

• --prefix=escape character__target character..

When nkf converts to Shift_JIS, nkf adds a specified escape character to specified 2nd byte of Shift_JIS characters. 1st byte of argument is the escape character and following bytes are target characters.

• --no-cp932ext

Handle the characters extended in CP932 as unassigned characters.

• --no-best-fit-chars

When Unicode to Encoded byte conversion, don't convert characters which is not round trip safe. When Unicode to Unicode conversion, with this and -x option, nkf can be used as UTF converter. (In other words, without this and -x option, nkf doesn't save some characters)

When nkf converts strings that related to path, you should use this option.

• --cap-input

Decode hex encoded characters.

• --url-input

Unescape percent escaped characters.

• --numchar-input

Decode character reference, such as "&#....;".

• --in-place[=SUFFIX] --overwrite[=SUFFIX]

Overwrite original listed files by filtered result.

Note --overwrite preserves timestamps of original files.

• --guess=[12]

Print guessed encoding and newline. (2 is default, 1 is only encoding)

• --help

Print nkf's help.

• --version

Print nkf's version.

• --

Ignore rest of -option.

AUTHOR

Copyright (c) 1987, Fujitsu LTD. (Itaru ICHIKAWA).

Copyright (c) 1996-2012, The nkf Project.