Won't compile - Arduino Ide 2.3.3 - need bin file for Esp32 Dev Wifi

[ronehorn]

C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\menu_file.cpp: In function 'uint16_t fileCnt(uint8_t)':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\menu_file.cpp:143:26: error: cannot convert 'SdBaseFile*' {aka 'FsBaseFile*'} to 'FatFile*'
143 | while ( file.openNext( &aDir[level] ) ) {
| ^~~~~~~~~~~~
| |
| SdBaseFile* {aka FsBaseFile*}
In file included from c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatVolume.h:27,
from c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatLib.h:28,
from c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/SdFat.h:32,
from C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\menu_file.cpp:13:
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:613:26: note: initializing argument 1 of 'bool FatFile::openNext(FatFile*, oflag_t)'
613 | bool openNext(FatFile* dirFile, oflag_t oflag = O_RDONLY);
| ~~~~~~~~~^~~~~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\menu_file.cpp: In function 'boolean updateFilesBtn()':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\menu_file.cpp:171:27: error: cannot convert 'SdBaseFile*' {aka 'FsBaseFile*'} to 'FatFile*'
171 | if ( ! file.openNext( &aDir[dirLevel] ) ) { // ouvre le prochain fichier dans le répertoire courant ; en cas d'erreur, retour à la page info avec un message d'erreur
| ^~~~~~~~~~~~~~~
| |
| SdBaseFile* {aka FsBaseFile*}
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:613:26: note: initializing argument 1 of 'bool FatFile::openNext(FatFile*, oflag_t)'
613 | bool openNext(FatFile* dirFile, oflag_t oflag = O_RDONLY);
| ~~~~~~~~~^~~~~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\menu_file.cpp:185:27: error: cannot convert 'SdBaseFile*' {aka 'FsBaseFile*'} to 'FatFile*'
185 | if ( ! file.openNext( &aDir[dirLevel] ) ) {
| ^~~~~~~~~~~~~~~
| |
| SdBaseFile* {aka FsBaseFile*}
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:613:26: note: initializing argument 1 of 'bool FatFile::openNext(FatFile*, oflag_t)'
613 | bool openNext(FatFile* dirFile, oflag_t oflag = O_RDONLY);
| ~~~~~~~~~^~~~~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\menu_file.cpp: In function 'boolean setFileToRead(uint8_t)':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\menu_file.cpp:261:18: error: no matching function for call to 'File32::open(SdBaseFile*, char [50], int)'
261 | fileToShow.open( &aDir[dirLevel] , fileToShowName, O_READ ) ; // open the current file for browsing
| ~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:505:8: note: candidate: 'bool FatFile::open(FatVolume*, const char*, oflag_t)'
505 | bool open(FatVolume* vol, const char* path, oflag_t oflag = O_RDONLY);
| ^~~~
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:505:24: note: no known conversion for argument 1 from 'SdBaseFile*' {aka 'FsBaseFile*'} to 'FatVolume*'
505 | bool open(FatVolume* vol, const char* path, oflag_t oflag = O_RDONLY);
| ~~~~~~~~~~~^~~
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:519:8: note: candidate: 'bool FatFile::open(FatFile*, uint16_t, oflag_t)'
519 | bool open(FatFile* dirFile, uint16_t index, oflag_t oflag = O_RDONLY);
| ^~~~
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:519:22: note: no known conversion for argument 1 from 'SdBaseFile*' {aka 'FsBaseFile*'} to 'FatFile*'
519 | bool open(FatFile* dirFile, uint16_t index, oflag_t oflag = O_RDONLY);
| ~~~~~~~~~^~~~~~~
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:531:8: note: candidate: 'bool FatFile::open(uint16_t, oflag_t)'
531 | bool open(uint16_t index, oflag_t oflag = O_RDONLY);
| ^~~~
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:531:8: note: candidate expects 2 arguments, 3 provided
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:577:8: note: candidate: 'bool FatFile::open(FatFile*, const char*, oflag_t)'
577 | bool open(FatFile* dirFile, const char* path, oflag_t oflag = O_RDONLY);
| ^~~~
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:577:22: note: no known conversion for argument 1 from 'SdBaseFile*' {aka 'FsBaseFile*'} to 'FatFile*'
577 | bool open(FatFile* dirFile, const char* path, oflag_t oflag = O_RDONLY);
| ~~~~~~~~~^~~~~~~
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:587:8: note: candidate: 'bool FatFile::open(const char*, oflag_t)'
587 | bool open(const char* path, oflag_t oflag = O_RDONLY);
| ^~~~
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:587:8: note: candidate expects 2 arguments, 3 provided
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:1047:8: note: candidate: 'bool FatFile::open(FatFile*, FatLfn_t*, oflag_t)'
1047 | bool open(FatFile* dirFile, FatLfn_t* fname, oflag_t oflag);
| ^~~~
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:1047:22: note: no known conversion for argument 1 from 'SdBaseFile*' {aka 'FsBaseFile*'} to 'FatFile*'
1047 | bool open(FatFile* dirFile, FatLfn_t* fname, oflag_t oflag);
| ~~~~~~~~~^~~~~~~
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:1048:8: note: candidate: 'bool FatFile::open(FatFile*, FatSfn_t*, oflag_t)'
1048 | bool open(FatFile* dirFile, FatSfn_t* fname, oflag_t oflag);
| ^~~~
c:\Users\roneh\OneDrive\Documents\Arduino\libraries\SdFat\src/FatLib/FatFile.h:1048:22: note: no known conversion for argument 1 from 'SdBaseFile*' {aka 'FsBaseFile*'} to 'FatFile*'
1048 | bool open(FatFile* dirFile, FatSfn_t* fname, oflag_t oflag);
| ~~~~~~~~~^~~~~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\com.cpp: In function 'void sendFromString()':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\com.cpp:564:13: error: 'gcvt' was not declared in this scope
564 | gcvt(savedWposXYZA[2], 3, floatToString); // convert float to string
| ^~~~
In file included from C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.h:52,
from C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\config.h:247,
from C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\grbl_controller_esp32.ino:71:
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.c: In function 'void dc_callback(spi_transaction_t*)':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:126:22: error: 'GPIO' was not declared in this scope
126 | #define DC_D GPIO.out_w1ts = (1 << TFT_DC)//;GPIO.out_w1ts = (1 << TFT_DC)
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.c:676:28: note: in expansion of macro 'DC_D'
676 | if ((bool)spi_tx->user) {DC_D;}
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:125:22: error: 'GPIO' was not declared in this scope
125 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.c:677:9: note: in expansion of macro 'DC_C'
677 | else {DC_C;}
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp: In member function 'void TFT_eSPI::begin_tft_write()':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:162:22: error: 'GPIO' was not declared in this scope
162 | #define CS_L GPIO.out1_w1tc.val = (1 << (TFT_CS - 32)); GPIO.out1_w1tc.val = (1 << (TFT_CS - 32))
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp:59:5: note: in expansion of macro 'CS_L'
59 | CS_L;
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp: In member function 'void TFT_eSPI::end_tft_write()':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:163:22: error: 'GPIO' was not declared in this scope
163 | #define CS_H GPIO.out1_w1ts.val = (1 << (TFT_CS - 32))//;GPIO.out1_w1ts.val = (1 << (TFT_CS - 32))
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp:78:7: note: in expansion of macro 'CS_H'
78 | CS_H;
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp: In member function 'void TFT_eSPI::begin_tft_read()':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:162:22: error: 'GPIO' was not declared in this scope
162 | #define CS_L GPIO.out1_w1tc.val = (1 << (TFT_CS - 32)); GPIO.out1_w1tc.val = (1 << (TFT_CS - 32))
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp:99:5: note: in expansion of macro 'CS_L'
99 | CS_L;
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp: In member function 'void TFT_eSPI::end_tft_read()':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:163:22: error: 'GPIO' was not declared in this scope
163 | #define CS_H GPIO.out1_w1ts.val = (1 << (TFT_CS - 32))//;GPIO.out1_w1ts.val = (1 << (TFT_CS - 32))
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp:330:7: note: in expansion of macro 'CS_H'
330 | CS_H;
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp: In member function 'void TFT_eSPI::writecommand(uint8_t)':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:125:22: error: 'GPIO' was not declared in this scope
125 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp:802:3: note: in expansion of macro 'DC_C'
802 | DC_C;
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp: In member function 'void TFT_eSPI::writedata(uint8_t)':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:126:22: error: 'GPIO' was not declared in this scope
126 | #define DC_D GPIO.out_w1ts = (1 << TFT_DC)//;GPIO.out_w1ts = (1 << TFT_DC)
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp:821:3: note: in expansion of macro 'DC_D'
821 | DC_D; // Play safe, but should already be in data mode
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp: In member function 'uint8_t TFT_eSPI::readcommand8(uint8_t, uint8_t)':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:125:22: error: 'GPIO' was not declared in this scope
125 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp:858:3: note: in expansion of macro 'DC_C'
858 | DC_C; tft_Write_8(0xD9);
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp: In member function 'uint16_t TFT_eSPI::readPixel(int32_t, int32_t)':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:163:22: error: 'GPIO' was not declared in this scope
163 | #define CS_H GPIO.out1_w1ts.val = (1 << (TFT_CS - 32))//;GPIO.out1_w1ts.val = (1 << (TFT_CS - 32))
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp:1014:3: note: in expansion of macro 'CS_H'
1014 | CS_H;
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp: In member function 'void TFT_eSPI::readRectRGB(int32_t, int32_t, int32_t, int32_t, uint8_t*)':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:163:22: error: 'GPIO' was not declared in this scope
163 | #define CS_H GPIO.out1_w1ts.val = (1 << (TFT_CS - 32))//;GPIO.out1_w1ts.val = (1 << (TFT_CS - 32))
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp:1790:3: note: in expansion of macro 'CS_H'
1790 | CS_H;
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp: In member function 'void TFT_eSPI::setWindow(int32_t, int32_t, int32_t, int32_t)':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:125:22: error: 'GPIO' was not declared in this scope
125 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp:2884:3: note: in expansion of macro 'DC_C'
2884 | DC_C; tft_Write_8(TFT_CASET);
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp: In member function 'void TFT_eSPI::readAddrWindow(int32_t, int32_t, int32_t, int32_t)':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:125:22: error: 'GPIO' was not declared in this scope
125 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp:2922:3: note: in expansion of macro 'DC_C'
2922 | DC_C; tft_Write_8(TFT_CASET);
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp: In member function 'virtual void TFT_eSPI::drawPixel(int32_t, int32_t, uint32_t)':
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:125:22: error: 'GPIO' was not declared in this scope
125 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp:3002:5: note: in expansion of macro 'DC_C'
3002 | DC_C; tft_Write_8(TFT_CASET);
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:125:22: error: 'GPIO' was not declared in this scope
125 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp:3009:5: note: in expansion of macro 'DC_C'
3009 | DC_C; tft_Write_8(TFT_PASET);
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\Processors\TFT_eSPI_ESP32.h:125:22: error: 'GPIO' was not declared in this scope
125 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\TFT_eSPI_ms\TFT_eSPI.cpp:3014:3: note: in expansion of macro 'DC_C'
3014 | DC_C; tft_Write_8(TFT_RAMWR);
| ^~~~
In file included from C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\browser.cpp:11:
In member function 'size_t WebServer::streamFile(T&, const String&, int) [with T = File32]',
inlined from 'void DownloadFile(String)' at C:\Users\roneh\Downloads\grbl_controller_esp32--master\grbl_controller_esp32--master\grbl_controller_esp32\browser.cpp:495:26:
C:\Users\roneh\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.0.5\libraries\WebServer\src/WebServer.h:224:43: error: call to 'StreamFile<FatFile, long unsigned int>::name' declared with attribute error: use getName(name, size)
224 | _streamFileCore(file.size(), file.name(), contentType, code);
| ~~~~~~~~~^~

exit status 1

Compilation error: cannot convert 'SdBaseFile*' {aka 'FsBaseFile*'} to 'FatFile*'