(Not issue) Information how to switch On/Off photoframe from domoticz

[JuliAn50M]

My photoframe is set to wake up 1 hour a day. This is cool. But sometimes when I'm at home (in week end for exemple) I want to switch on the frame. If like me you have a domotic, you can drive it via http request (via curl for exemple in domoticz).

you need two requests:

-One to disable the schedule (Powersave = none) so it switch On:
curl -X PUT -H "Authorization: Basic cGhvdG9mcmFtZTpwYXNzd29yZA==" http://192.168.0.40:7777/setting/powersave/none

-One to re-establish the schedule (Powersave = schedule) so it switch Off if you are out of range time :
curl -X PUT -H "Authorization: Basic cGhvdG9mcmFtZTpwYXNzd29yZA==" http://192.168.0.40:7777/setting/powersave/schedule

There are two things to change in requests:

• 'cGhvdG9mcmFtZTpwYXNzd29yZA==' is your encoded credential
• '192.168.0.40:7777 ' is photoframe IP:Port

to get this informations, I use Fiddler to watch request sent to photoframe when you are log on the settings interface.

In domoticz, create a Selector switch with 2 levels ( ON - OFF - ID=194 in my case).

Then create this LUA script (replace your selector id)

=>
function getNameFromIdx(deviceIDX)
for i, v in pairs(otherdevices_idx) do
if v == deviceIDX then
return i
end
end
return 0
end
commandArray = {}

--Constantes
myDeviceIdx = 194
myDeviceName = getNameFromIdx(myDeviceIdx)

-- loop through all the changed devices
for deviceName,deviceValue in pairs(devicechanged) do
    
    --isolation conso lave linge
    if (deviceName==myDeviceName) then
        
        if deviceValue == "ON" then
            print("PhotoFrame is ON")
            os.execute ('curl -X PUT -H "Authorization: Basic cGhvdG9mcmFtZTpwYXNzd29yZA==" http://192.168.0.40:7777/setting/powersave/none')
        else
            print("PhotoFrame is OFF")
            os.execute ('curl -X PUT -H "Authorization: Basic cGhvdG9mcmFtZTpwYXNzd29yZA==" http://192.168.0.40:7777/setting/powersave/schedule')
        end
    end

end
return commandArray