platformio_override.ini

; ***  PlatformIO Project Configuration Override File   ***
; ***  Changes done here override settings in platformio.ini    ***
;
; Place your personal settings like monitor_port and upload_port here
; instead of editing platformio.ini
; to avoid annoying merge conflicts when you pull updates into your
; personal clone of the repository
;
; Please visit documentation for the options and examples
; http://docs.platformio.org/en/stable/projectconf.html

[env]
; Specify port here. Comment out (add ; in front of line) to use auto detection.
; Under Linux, the ports are in the format /dev/tty***, typically /dev/ttyUSB0
; To look up the port, execute ls /dev/tty*, then connect the device
; then execute ls /dev/tty* again and check which device was added
;monitor_port = COM4
;upload_port = COM4


; you can define your personal board and/or settings here
; non functional example:

;[env:my_very_special_board]
;board = esp32dev
;build_flags = ${env.build_flags}
;    -DHOYMILES_PIN_MISO=1
;    -DHOYMILES_PIN_MOSI=2
;    -DHOYMILES_PIN_SCLK=3
;    -DHOYMILES_PIN_IRQ=4
;    -DHOYMILES_PIN_CE=5
;    -DHOYMILES_PIN_CS=6
;    -DVICTRON_PIN_TX=21
;    -DVICTRON_PIN_RX=22
;    -DHUAWEI_PIN_MISO=12
;    -DHUAWEI_PIN_MOSI=13
;    -DHUAWEI_PIN_SCLK=26
;    -DHUAWEI_PIN_IRQ=25
;    -DHUAWEI_PIN_CS=15
;monitor_port = /dev/ttyACM0
;upload_port = /dev/ttyACM0