halmac.mk

# All needed files would be added to _HAL_INTFS_FILES, and it would include
# hal/hal_halmac.c and all related files in directory hal/halmac/.
# Before include this makefile, be sure interface (CONFIG_*_HCI) and IC
# (CONFIG_RTL*) setting are all ready!

# Base directory
path_hm := $(topDIR)/hal/halmac
# Level 1 directory
path_hm_d1 := $(path_hm)/halmac_88xx

ifeq ($(CONFIG_PCI_HCI), y)
pci := y
endif
ifeq ($(CONFIG_SDIO_HCI), y)
sdio := y
endif
ifeq ($(CONFIG_USB_HCI), y)
usb := y
endif

ifeq ($(CONFIG_RTL8822B), y)
ic := 8822b
endif

ifeq ($(CONFIG_RTL8822C), y)
ic := 8822c
endif

ifeq ($(CONFIG_RTL8821C), y)
ic := 8821c
endif

ifeq ($(CONFIG_RTL8814B), y)
v1 := "_v1"
ic := 8814b
endif

halmac-y +=		$(path_hm)/halmac_api.o

# Modify level 1 directory if needed
path_hm_d1 := $(path_hm_d1)$(v1)
halmac-y +=		$(path_hm_d1)/halmac_bb_rf_88xx$(v1).o \
			$(path_hm_d1)/halmac_cfg_wmac_88xx$(v1).o \
			$(path_hm_d1)/halmac_common_88xx$(v1).o \
			$(path_hm_d1)/halmac_efuse_88xx$(v1).o \
			$(path_hm_d1)/halmac_flash_88xx$(v1).o \
			$(path_hm_d1)/halmac_fw_88xx$(v1).o \
			$(path_hm_d1)/halmac_gpio_88xx$(v1).o \
			$(path_hm_d1)/halmac_init_88xx$(v1).o \
			$(path_hm_d1)/halmac_mimo_88xx$(v1).o
halmac-$(pci) += 	$(path_hm_d1)/halmac_pcie_88xx$(v1).o
halmac-$(sdio) +=	$(path_hm_d1)/halmac_sdio_88xx$(v1).o
halmac-$(usb) += 	$(path_hm_d1)/halmac_usb_88xx$(v1).o

# Level 2 directory
path_hm_d2 := $(path_hm_d1)/halmac_$(ic)
halmac-y +=		$(path_hm_d2)/halmac_cfg_wmac_$(ic).o \
			$(path_hm_d2)/halmac_common_$(ic).o \
			$(path_hm_d2)/halmac_gpio_$(ic).o \
			$(path_hm_d2)/halmac_init_$(ic).o \
			$(path_hm_d2)/halmac_phy_$(ic).o \
			$(path_hm_d2)/halmac_pwr_seq_$(ic).o
halmac-$(pci) += 	$(path_hm_d2)/halmac_pcie_$(ic).o
halmac-$(sdio) +=	$(path_hm_d2)/halmac_sdio_$(ic).o
halmac-$(usb) += 	$(path_hm_d2)/halmac_usb_$(ic).o

_HAL_INTFS_FILES +=	hal/hal_halmac.o
_HAL_INTFS_FILES +=	$(halmac-y)