- Introduction
- Installation
- Serving Sites
- Sharing Sites
- Viewing Logs
- Custom Valet Drivers
- Other Valet Commands
Valet is a Laravel development environment for Mac minimalists. No Vagrant, No Apache, No Nginx, No /etc/hosts file. You can even share your sites publicly using local tunnels. Yeah, we like it too.
Laravel Valet configures your Mac to always run Caddy in the background when your machine starts. Then, using DnsMasq, Valet proxies all requests on the *.dev domain to point to sites installed on your local machine.
In other words, a blazing fast Laravel development environment that uses roughly 7 MB of RAM. Valet isn't a complete replacement for Vagrant or Homestead, but provides a great alternative if you want flexible basics, prefer extreme speed, or are working on a machine with a limited amount of RAM.
Out of the box, Valet support includes, but is not limited to:
However, you may extend Valet with your own custom drivers.
As you may know, Laravel offers Homestead, another local Laravel development environment. Homestead and Valet differ in regards to their intended audience and their approach to local development. Homestead offers an entire Ubuntu virtual machine with automated Nginx configuration. Homestead is a wonderful choice if you want a fully virtualized Linux development environment or are on Windows / Linux.
Valet only supports Mac, and requires you to install PHP and a database server directly onto your local machine. This is easily achieved by using Homebrew with commands like brew install php70 and brew install mariadb. Valet provides a blazing fast local development environment with minimal resource consumption, so it's great for developers who only require PHP / MySQL and do not need a fully virtualized development environment.
Both Valet and Homestead are great choices for configuring your Laravel development environment. Which one you choose will depend on your personal taste and your team's needs.
Valet requires macOS and Homebrew. Before installation, you should make sure that no other programs such as Apache or Nginx are binding to your local machine's port 80.
Once Valet is installed, try pinging any *.dev domain on your terminal using a command such as ping foobar.dev. If Valet is installed correctly you should see this domain responding on 127.0.0.1.
Valet will automatically start its daemon each time your machine boots. There is no need to run valet start or valet install ever again once the initial Valet installation is complete.
By default, Valet serves your projects using the .dev TLD. If you'd like to use another domain, you can do so using the valet domain tld-name command.
For example, if you'd like to use .app instead of .dev, run valet domain app and Valet will start serving your projects at *.app automatically.
If you need a database, try MariaDB by running brew install mariadb on your command line. Once MariaDB has been installed, you may start it using the brew services start mariadb command. You can then connect to the database at 127.0.0.1 using the root username and an empty string for the password.
You may update your Valet installation using the composer global update command in your terminal. After upgrading, it is good practice to run the valet install command so Valet can make additional upgrades to your configuration files if necessary.
Once Valet is installed, you're ready to start serving sites. Valet provides two commands to help you serve your Laravel sites: park and link.
That's all there is to it. Now, any Laravel project you create within your "parked" directory will automatically be served using the http://folder-name.dev convention.
The link command may also be used to serve your Laravel sites. This command is useful if you want to serve a single site in a directory and not the entire directory.
To see a listing of all of your linked directories, run the valet links command. You may use valet unlink app-name to destroy the symbolic link.
{tip} You can use
valet linkto serve the same project from multiple (sub)domains. To add a subdomain or another domain to your project runvalet link subdomain.app-namefrom the project folder.
By default, Valet serves sites over plain HTTP. However, if you would like to serve a site over encrypted TLS using HTTP/2, use the secure command. For example, if your site is being served by Valet on the laravel.dev domain, you should run the following command to secure it:
valet secure laravel
To "unsecure" a site and revert back to serving its traffic over plain HTTP, use the unsecure command. Like the secure command, this command accepts the host name that you wish to unsecure:
valet unsecure laravel
Valet even includes a command to share your local sites with the world. No additional software installation is required once Valet is installed.
To share a site, navigate to the site's directory in your terminal and run the valet share command. A publicly accessible URL will be inserted into your clipboard and is ready to paste directly into your browser. That's it.
To stop sharing your site, hit Control + C to cancel the process.
If you would like to stream all of the logs for all of your sites to your terminal, run the valet logs command. New log entries will display in your terminal as they occur. This is a great way to stay on top of all of your log files without ever having to leave your terminal.
You can write your own Valet "driver" to serve PHP applications running on another framework or CMS that is not natively supported by Valet. When you install Valet, a ~/.valet/Drivers directory is created which contains a SampleValetDriver.php file. This file contains a sample driver implementation to demonstrate how to write a custom driver. Writing a driver only requires you to implement three methods: serves, isStaticFile, and frontControllerPath.
All three methods receive the $sitePath, $siteName, and $uri values as their arguments. The $sitePath is the fully qualified path to the site being served on your machine, such as /Users/Lisa/Sites/my-project. The $siteName is the "host" / "site name" portion of the domain (my-project). The $uri is the incoming request URI (/foo/bar).
Once you have completed your custom Valet driver, place it in the ~/.valet/Drivers directory using the FrameworkValetDriver.php naming convention. For example, if you are writing a custom valet driver for WordPress, your file name should be WordPressValetDriver.php.
Let's take at a sample implementation of each method your custom Valet driver should implement.
The serves method should return true if your driver should handle the incoming request. Otherwise, the method should return false. So, within this method you should attempt to determine if the given $sitePath contains a project of the type you are trying to serve.
For example, let's pretend we are writing a WordPressValetDriver. Our serve method might look something like this:
/**
* Determine if the driver serves the request.
*
* @param string $sitePath
* @param string $siteName
* @param string $uri
* @return void
*/
public function serves($sitePath, $siteName, $uri)
{
return is_dir($sitePath.'/wp-admin');
}
The isStaticFile should determine if the incoming request is for a file that is "static", such as an image or a stylesheet. If the file is static, the method should return the fully qualified path to the static file on disk. If the incoming request is not for a static file, the method should return false:
/**
* Determine if the incoming request is for a static file.
*
* @param string $sitePath
* @param string $siteName
* @param string $uri
* @return string|false
*/
public function isStaticFile($sitePath, $siteName, $uri)
{
if (file_exists($staticFilePath = $sitePath.'/public/'.$uri)) {
return $staticFilePath;
}
return false;
}
{note} The
isStaticFilemethod will only be called if theservesmethod returnstruefor the incoming request and the request URI is not/.
The frontControllerPath method should return the fully qualified path to your application's "front controller", which is typically your "index.php" file or equivalent:
/**
* Get the fully resolved path to the application's front controller.
*
* @param string $sitePath
* @param string $siteName
* @param string $uri
* @return string
*/
public function frontControllerPath($sitePath, $siteName, $uri)
{
return $sitePath.'/public/index.php';
}
| Command | Description |
|---|---|
valet forget |
Run this command from a "parked" directory to remove it from the parked directory list. |
valet paths |
View all of your "parked" paths. |
valet restart |
Restart the Valet daemon. |
valet start |
Start the Valet daemon. |
valet stop |
Stop the Valet daemon. |
valet uninstall |
Uninstall the Valet daemon entirely. |