run.py

"""
A lightweight runner that just sets up a model and runs one of its functions in a particular configuration.

Intended for debugging/exploration/profiling use cases, where the test/measurement harness is overhead.

DANGER: make sure to `python install.py` first or otherwise make sure the benchmark you are going to run
        has been installed.  This script intentionally does not automate or enforce setup steps.

Wall time provided for sanity but is not a sane benchmark measurement.
"""

import argparse
import time
from functools import partial

import numpy as np
import torch
import torch.profiler as profiler

from torchbenchmark.util.experiment.instantiator import (
    load_model,
    TorchBenchModelConfig,
)
from torchbenchmark.util.experiment.metrics import get_model_flops, get_peak_memory


if not hasattr(torch.version, "git_version"):
    from pytorch.benchmark.fb.run_utils import trace_handler, usage_report_logger
else:
    usage_report_logger = lambda: None


WARMUP_ROUNDS = 3
SUPPORT_DEVICE_LIST = ["cpu", "cuda"]
if hasattr(torch.backends, "mps") and torch.backends.mps.is_available():
    SUPPORT_DEVICE_LIST.append("mps")
SUPPORT_PROFILE_LIST = [
    "record_shapes",
    "profile_memory",
    "with_stack",
    "with_flops",
    "with_modules",
]


def run_one_step_with_cudastreams(func, streamcount):

    print("Running Utilization Scaling Using Cuda Streams")

    streamlist = []
    for i in range(1, streamcount + 1, 1):

        # create additional streams and prime with load
        while len(streamlist) < i:
            s = torch.cuda.Stream()
            streamlist.append(s)

        for s in streamlist:
            with torch.cuda.stream(s):
                func()

        torch.cuda.synchronize()  # Wait for the events to be recorded!

        # now run benchmark using streams
        start_event = torch.cuda.Event(enable_timing=True)
        end_event = torch.cuda.Event(enable_timing=True)
        start_event.record()

        for s in streamlist:
            with torch.cuda.stream(s):
                func()

        end_event.record()
        torch.cuda.synchronize()

        print(f"Cuda StreamCount:{len(streamlist)}")
        print(
            "{:<20} {:>20}".format(
                "GPU Time:", "%.3f milliseconds" % start_event.elapsed_time(end_event)
            ),
            sep="",
        )


def printResultSummaryTime(
    result_summary,
    model,
    metrics_needed=[],
    flops_model_analyzer=None,
    model_flops=None,
    cpu_peak_mem=None,
    mem_device_id=None,
    gpu_peak_mem=None,
):
    assert model is not None, "model can not be None."
    if args.device == "cuda":
        gpu_time = np.median(list(map(lambda x: x[0], result_summary)))
        cpu_walltime = np.median(list(map(lambda x: x[1], result_summary)))
        print(
            "{:<20} {:>20}".format(
                "GPU Time per batch:",
                "%.3f milliseconds" % (gpu_time / model.num_batch),
                sep="",
            )
        )
    else:
        cpu_walltime = np.median(list(map(lambda x: x[0], result_summary)))
    print(
        "{:<20} {:>20}".format(
            "CPU Wall Time per batch:",
            "%.3f milliseconds" % (cpu_walltime / model.num_batch),
            sep="",
        )
    )
    print(
        "{:<20} {:>20}".format(
            "CPU Wall Time:",
            "%.3f milliseconds" % (cpu_walltime),
            sep="",
        )
    )
    # if model_flops is not None, output the TFLOPs per sec
    if "flops" in metrics_needed:
        if flops_model_analyzer.metrics_backend_mapping["flops"] == "dcgm":
            tflops_device_id, tflops = flops_model_analyzer.calculate_flops()
        else:
            flops = model.get_flops()
            tflops = flops / (cpu_walltime / 1.0e3) / 1.0e12
        print(
            "{:<20} {:>20}".format(
                "GPU FLOPS:", "%.4f TFLOPs per second" % tflops, sep=""
            )
        )
    if "ttfb" in metrics_needed:
        print(
            "{:<20} {:>20}".format(
                "Time to first batch:", "%.4f ms" % model.ttfb, sep=""
            )
        )
    if model_flops is not None:
        tflops = model_flops / (cpu_walltime / 1.0e3) / 1.0e12
        print(
            "{:<20} {:>20}".format(
                "Model Flops:", "%.4f TFLOPs per second" % tflops, sep=""
            )
        )
    if gpu_peak_mem is not None:
        print(
            "{:<20} {:>20}".format(
                "GPU %d Peak Memory:" % mem_device_id, "%.4f GB" % gpu_peak_mem, sep=""
            )
        )
    if cpu_peak_mem is not None:
        print(
            "{:<20} {:>20}".format("CPU Peak Memory:", "%.4f GB" % cpu_peak_mem, sep="")
        )


def run_one_step(
    func,
    model,
    nwarmup=WARMUP_ROUNDS,
    num_iter=10,
    export_metrics_file=None,
    stress=0,
    metrics_needed=[],
    metrics_gpu_backend=None,
    model_flops=None,
):
    # Warm-up `nwarmup` rounds
    for _i in range(nwarmup):
        func()

    result_summary = []
    flops_model_analyzer = None
    if "flops" in metrics_needed:
        from torchbenchmark._components.model_analyzer.TorchBenchAnalyzer import (
            ModelAnalyzer,
        )

        flops_model_analyzer = ModelAnalyzer(
            export_metrics_file, ["flops"], metrics_gpu_backend
        )
        flops_model_analyzer.start_monitor()

    if stress:
        cur_time = time.time_ns()
        start_time = cur_time
        target_time = stress * 1e9 + start_time
        num_iter = -1
        last_time = start_time
    _i = 0
    last_it = 0
    first_print_out = True
    while (not stress and _i < num_iter) or (stress and cur_time < target_time):
        if args.device == "cuda":
            torch.cuda.synchronize()
            start_event = torch.cuda.Event(enable_timing=True)
            end_event = torch.cuda.Event(enable_timing=True)

            # Collect time_ns() instead of time() which does not provide better precision than 1
            # second according to https://docs.python.org/3/library/time.html#time.time.
            t0 = time.time_ns()
            start_event.record()
            func()
            end_event.record()
            torch.cuda.synchronize()
            t1 = time.time_ns()
            result_summary.append(
                (start_event.elapsed_time(end_event), (t1 - t0) / 1_000_000)
            )
        elif args.device == "mps":
            t0 = time.time_ns()
            func()
            t1 = time.time_ns()
            wall_latency = t1 - t0
            # TODO: modify this to add GPU time as well
            result_summary.append([(t1 - t0) / 1_000_000])
        else:
            t0 = time.time_ns()
            func()
            t1 = time.time_ns()
            result_summary.append([(t1 - t0) / 1_000_000])
        if stress:
            cur_time = time.time_ns()
            # print out the status every 10s.
            if (cur_time - last_time) >= 10 * 1e9:
                if first_print_out:
                    print(
                        "|{:^20}|{:^20}|{:^20}|".format(
                            "Iterations", "Time/Iteration(ms)", "Rest Time(s)"
                        )
                    )
                    first_print_out = False
                est = (target_time - cur_time) / 1e9
                time_per_it = (cur_time - last_time) / (_i - last_it) / 1e6
                print(
                    "|{:^20}|{:^20}|{:^20}|".format(
                        "%d" % _i, "%.2f" % time_per_it, "%d" % int(est)
                    )
                )
                last_time = cur_time
                last_it = _i
        _i += 1

    if flops_model_analyzer is not None:
        flops_model_analyzer.stop_monitor()
        flops_model_analyzer.aggregate()
    cpu_peak_mem = None
    gpu_peak_mem = None
    mem_device_id = None
    if "cpu_peak_mem" in metrics_needed or "gpu_peak_mem" in metrics_needed:
        cpu_peak_mem, mem_device_id, gpu_peak_mem = get_peak_memory(
            func,
            model.device,
            export_metrics_file=export_metrics_file,
            metrics_needed=metrics_needed,
            metrics_gpu_backend=metrics_gpu_backend,
        )
    printResultSummaryTime(
        result_summary,
        model,
        metrics_needed,
        flops_model_analyzer,
        model_flops,
        cpu_peak_mem,
        mem_device_id,
        gpu_peak_mem,
    )


def profile_one_step(func, model, nwarmup=WARMUP_ROUNDS):
    activity_groups = []
    result_summary = []
    device_to_activity = {
        "cuda": profiler.ProfilerActivity.CUDA,
        "cpu": profiler.ProfilerActivity.CPU,
    }
    if args.profile_devices:
        activity_groups = [
            device_to_activity[device]
            for device in args.profile_devices
            if (device in device_to_activity)
        ]
    else:
        if args.device == "cuda":
            activity_groups = [
                profiler.ProfilerActivity.CUDA,
                profiler.ProfilerActivity.CPU,
            ]
        elif args.device == "cpu":
            activity_groups = [profiler.ProfilerActivity.CPU]

    profile_opts = {}

    for opt in SUPPORT_PROFILE_LIST:
        profile_opts[opt] = False if args.no_profile_detailed else True
        # options can be overriden by disable-profile-options
        if (
            args.disable_profile_options is not None
            and opt in args.disable_profile_options
        ):
            profile_opts[opt] = False

    if args.profile_eg:
        import os
        from datetime import datetime

        from torch.profiler import ExecutionTraceObserver

        start_time = datetime.now()
        timestamp = int(datetime.timestamp(start_time))
        eg_file = f"{args.model}_{timestamp}_eg.json"
        eg = ExecutionTraceObserver()
        if not os.path.exists(args.profile_eg_folder):
            os.makedirs(args.profile_eg_folder)
        eg.register_callback(f"{args.profile_eg_folder}/{eg_file}")
        nwarmup = 0
        eg.start()
    with profiler.profile(
        schedule=profiler.schedule(wait=0, warmup=nwarmup, active=1, repeat=1),
        activities=activity_groups,
        record_shapes=profile_opts["record_shapes"],
        profile_memory=profile_opts["profile_memory"],
        with_stack=profile_opts["with_stack"],
        with_flops=profile_opts["with_flops"],
        with_modules=profile_opts["with_modules"],
        on_trace_ready=(
            partial(trace_handler, f"torchbench_{args.model}")
            if (
                not hasattr(torch.version, "git_version")
                and args.profile_export_chrome_trace
            )
            else profiler.tensorboard_trace_handler(args.profile_folder)
        ),
    ) as prof:
        if args.device == "cuda":
            start_event = torch.cuda.Event(enable_timing=True)
            end_event = torch.cuda.Event(enable_timing=True)
            for i in range(nwarmup + 1):
                t0 = time.time_ns()
                start_event.record()
                func()
                torch.cuda.synchronize()  # Need to sync here to match run_one_step()'s timed run.
                end_event.record()
                t1 = time.time_ns()
                if i >= nwarmup:
                    result_summary.append(
                        (start_event.elapsed_time(end_event), (t1 - t0) / 1_000_000)
                    )
                prof.step()
        else:
            for i in range(nwarmup + 1):
                t0 = time.time_ns()
                func()
                t1 = time.time_ns()
                if i >= nwarmup:
                    result_summary.append([(t1 - t0) / 1_000_000])
                prof.step()
    if args.profile_eg and eg:
        eg.stop()
        eg.unregister_callback()
        print(f"Save Exeution Trace to : {args.profile_eg_folder}/{eg_file}")
    print(
        prof.key_averages(group_by_input_shape=True).table(
            sort_by="cpu_time_total", row_limit=30
        )
    )
    print(f"Saved TensorBoard Profiler traces to {args.profile_folder}.")

    printResultSummaryTime(result_summary, model=m)


def _validate_devices(devices: str):
    devices_list = devices.split(",")
    valid_devices = SUPPORT_DEVICE_LIST
    for d in devices_list:
        if d not in valid_devices:
            raise ValueError(
                f"Invalid device {d} passed into --profile-devices. Expected devices: {valid_devices}."
            )
    return devices_list


def _validate_profile_options(profile_options: str):
    profile_options_list = profile_options.split(",")
    for opt in profile_options_list:
        if opt not in SUPPORT_PROFILE_LIST:
            raise ValueError(
                f"Invalid profile option {opt} passed into --profile-options. Expected options: {SUPPORT_PROFILE_LIST}."
            )
    return profile_options_list


def main() -> None:
    global m, args
    parser = argparse.ArgumentParser(__doc__)
    parser.add_argument(
        "model",
        help="Full or partial name of a model to run.  If partial, picks the first match.",
    )
    parser.add_argument(
        "-d",
        "--device",
        choices=SUPPORT_DEVICE_LIST,
        default="cpu",
        help="Which device to use.",
    )
    parser.add_argument(
        "-t",
        "--test",
        choices=["eval", "train"],
        default="eval",
        help="Which test to run.",
    )
    parser.add_argument(
        "--profile", action="store_true", help="Run the profiler around the function"
    )
    parser.add_argument(
        "--disable-profile-options",
        type=_validate_profile_options,
        help=f"Select which profile options to disable. Valid options: {SUPPORT_PROFILE_LIST}.",
    )
    parser.add_argument("--amp", action="store_true", help="enable torch.autocast()")
    parser.add_argument(
        "--profile-folder",
        default="./logs",
        help="Save profiling model traces to this directory.",
    )
    parser.add_argument(
        "--no-profile-detailed",
        action="store_true",
        help=f"Only profile GPU kernels, excluding {SUPPORT_PROFILE_LIST}. "
        "To only disable some profile options, use --disable-profile-options instead.",
    )
    parser.add_argument(
        "--profile-export-chrome-trace",
        action="store_true",
        help="Export Chrome tracing files. (internal only)",
    )
    parser.add_argument(
        "--profile-devices",
        type=_validate_devices,
        help="Profile comma separated list of activities such as cpu,cuda.",
    )
    parser.add_argument(
        "--profile-eg", action="store_true", help="Collect execution trace by PARAM"
    )
    parser.add_argument(
        "--profile-eg-folder",
        default="./eg_logs",
        help="Save execution traces to this directory.",
    )
    parser.add_argument(
        "--cudastreams",
        action="store_true",
        help="Utilization test using increasing number of cuda streams.",
    )
    parser.add_argument("--bs", type=int, help="Specify batch size to the test.")
    parser.add_argument(
        "--export-metrics",
        action="store_true",
        help="Export all specified metrics records to a csv file. The default csv file name is [model_name]_all_metrics.csv.",
    )
    parser.add_argument(
        "--stress",
        type=float,
        default=0,
        help="Specify execution time (seconds) to stress devices.",
    )
    parser.add_argument(
        "--metrics",
        type=str,
        default="cpu_peak_mem,gpu_peak_mem,ttfb",
        help="Specify metrics [cpu_peak_mem,gpu_peak_mem,ttfb,flops,model_flops]to be collected. "
        "You can also set `none` to disable all metrics. The metrics are separated by comma such as cpu_peak_mem,gpu_peak_mem.",
    )
    parser.add_argument(
        "--metrics-gpu-backend",
        choices=["dcgm", "default"],
        default="default",
        help="""
        Specify the backend [dcgm, default] to collect metrics.
        In default mode, the latency(execution time) is collected by time.time_ns() and it is always enabled.
        Optionally, - you can specify cpu peak memory usage by --metrics cpu_peak_mem, and it is collected by psutil.Process().
        - you can specify gpu peak memory usage by --metrics gpu_peak_mem, and it is collected by nvml library.
        - you can specify flops by --metrics flops, and it is collected by fvcore.
        In dcgm mode, the latency(execution time) is collected by time.time_ns() and it is always enabled.
        Optionally,
        - you can specify cpu peak memory usage by --metrics cpu_peak_mem, and it is collected by psutil.Process().
        - you can specify cpu and gpu peak memory usage by --metrics cpu_peak_mem,gpu_peak_mem, and they are collected by dcgm library.""",
    )
    args, extra_args = parser.parse_known_args()
    if args.cudastreams and not args.device == "cuda":
        print("cuda device required to use --cudastreams option!")
        exit(-1)

    # Log the tool usage
    usage_report_logger()

    config = TorchBenchModelConfig(
        name=args.model,
        test=args.test,
        device=args.device,
        batch_size=args.bs,
        extra_args=extra_args,
    )
    metrics_needed = (
        [_ for _ in args.metrics.split(",") if _.strip()] if args.metrics else []
    )
    model_flops = get_model_flops(config) if "model_flops" in metrics_needed else None
    m = load_model(config)
    if m.dynamo:
        mode = f"dynamo {m.opt_args.torchdynamo}"
    elif m.opt_args.backend:
        mode = f"{m.opt_args.backend}"
    else:
        mode = "eager"
    print(
        f"Running {args.test} method from {m.name} on {args.device} in {mode} mode with input batch size {m.batch_size} and precision {m.dargs.precision}."
    )
    if "--accuracy" in extra_args:
        print("{:<20} {:>20}".format("Accuracy: ", str(m.accuracy)), sep="")
        exit(0)

    test = m.invoke
    if args.amp:
        test = torch.autocast(m.device)(test)
    if "none" in metrics_needed:
        metrics_needed = []

    # only enabled gpu_peak_mem for cuda device
    if args.device != "cuda" and "gpu_peak_mem" in metrics_needed:
        metrics_needed.remove("gpu_peak_mem")
    metrics_needed = list(set(metrics_needed))
    metrics_gpu_backend = args.metrics_gpu_backend
    if metrics_needed:
        if metrics_gpu_backend == "dcgm":
            from torchbenchmark._components.model_analyzer.TorchBenchAnalyzer import (
                check_dcgm,
            )

            check_dcgm()
        elif "gpu_peak_mem" in metrics_needed:
            from torchbenchmark._components.model_analyzer.TorchBenchAnalyzer import (
                check_nvml,
            )

            check_nvml()
        if "gpu_peak_mem" in metrics_needed or (
            "flops" in metrics_needed and metrics_gpu_backend == "dcgm"
        ):
            assert (
                args.device == "cuda"
            ), "gpu_peak_mem and flops:dcgm are only available for cuda device."
    if args.export_metrics:
        if not args.metrics:
            print("You have to specifiy at least one metrics to export.")
            exit(-1)
        export_metrics_file = "%s_all_metrics.csv" % args.model
    else:
        export_metrics_file = None
    if args.profile:
        profile_one_step(test, model=m)
    elif args.cudastreams:
        run_one_step_with_cudastreams(test, 10)
    else:
        run_one_step(
            test,
            model=m,
            export_metrics_file=export_metrics_file,
            stress=args.stress,
            metrics_needed=metrics_needed,
            metrics_gpu_backend=args.metrics_gpu_backend,
            model_flops=model_flops,
        )

    # Print dynamo compilation metrics, if there are any.
    try:
        if m.pt2_compilation_time:
            print(
                "{:<20} {:>18}".format(
                    "PT2 Compilation time: ", "%.3f seconds" % m.pt2_compilation_time
                ),
                sep="",
            )
        if m.pt2_graph_breaks:
            print(
                "{:<20} {:>18}".format(
                    "PT2 Graph Breaks: ", "%.3f" % m.pt2_graph_breaks
                ),
                sep="",
            )
    except:
        pass


if __name__ == "__main__":
    main()  # pragma: no cover