Skip to content

Clublog

Jump to bottom
Ladislav Foldyna edited this page Feb 10, 2024 · 6 revisions

QSOs can be uploaded to Clublog service via Service → Clublog.

QLog uploads all QSOs for selected callsign and locator that have not yet been uploaded and all QSOs that have been modified since the last upload. The current My Callsign is used as the upload callsign to Clublog.

Real-time upload can be enabled in Settings → Sync & QSL →Clublog. The current station callsign is used as the upload callsign. Real-Time upload currently support Add, Update and Delete QSOs with following limitations:

  • Operation Add - no limitation, every added QSO is sent to Clublog if QLog is online and has a connection to Clublog;
  • Operation batch Update - it does not send updated QSOs to Clublog due to Clublog Interface restrictions;
  • Operation single Update (edited via QSO Detail dialog) - no limitation, updated QSO is sent to Clublog if QLog has a connection to Clublog;
  • Operation Delete - The delete operation is synchronised with Clublog only if the number of deleted records does not exceed 5. If there are more records to be deleted, then due to Clublog restrictions, this request is not sent to clublog, but is executed in QLog.

Keep in mind that real-time upload is not 100% reliable due to various restrictions from the Clublog site. Therefore, Clublog itself recommends uploading all QSOs to Clublog one at a time. For this purpose, use the Clear Clublog and reupload QSOs option. This option deletes all QSOs in the Clublog log and based on the filter, it uploads all QSOs regardless of their status.

It is also possible to upload QSOs that are currently marked as "do not upload". In this case, by selecting "Included QSO with Upload Status" = No, these QSOs will be uploaded. Under normal circumstances, there is no need to use this option, but some log applications (and QLog up to version v0.19) mistakenly set Upload status.

Clone this wiki locally