OpenWrt is a minimal Linux distribution, and additional steps are required to run the mieru client in an OpenWrt environment. Please refer to the Client Installation & Configuration guide, and follow the instructions here to install and configure the mieru client.
After downloading the mieru client software, please copy the extracted mieru executable file to the /usr/bin/ directory on the OpenWrt system.
To allow other devices to connect to the proxy client on OpenWrt, you must set socks5ListenLAN to true. If you enable HTTP/HTTPS proxy, httpProxyListenLAN must also be set to true.
In OpenWrt, do not use the mieru apply config <FILE> and mieru describe config commands. Please save the client configuration directly to the /etc/mieru_client_config.json file.
Additionally, it is recommended to set the log level loggingLevel to ERROR to prevent logs from filling up the disk.
To start and stop the client, please do not use the mieru start and mieru stop commands. Please copy the configs/examples/etc_initd_mieru file from the project root directory to the /etc/init.d/mieru file, and grant it executable permission. Afterwards, the mieru client will automatically start when OpenWrt boots up.
If you need to manually start or stop the mieru client, you can use the commands /etc/init.d/mieru start and /etc/init.d/mieru stop.