Skip to content

Latest commit

 

History

History
1769 lines (1246 loc) · 79.6 KB

CHANGELOG.md

File metadata and controls

1769 lines (1246 loc) · 79.6 KB
Raw

Changelog

BREAKING NEWS

AMBASSADOR EDGE STACK 1.0.0

Ambassador Edge Stack 1.0.0 is a comprehensive, self-service solution for exposing, securing, and managing the boundary between end users and your Kubernetes services. The core of Ambassador Edge Stack is the open-source Ambassador API Gateway, built on the Envoy proxy.

Ambassador Edge Stack provides all the capabilities of the Ambassador API Gateway, as well as additional capabilities including:

  • The Edge Policy Console, a graphical UI to visualize and manage all of your edge policies;
  • Security features such as automatic TLS setup via ACME integration, OAuth/OpenID Connect integration, rate limiting, and fine-grained access control; and
  • Developer onboarding assistance, including an API catalog, Swagger/OpenAPI documentation support, and a fully customizable developer portal.

Note: Ambassador Edge Stack replaces Ambassador Pro and can be installed over existing instances of Ambassador Pro and Ambassador API Gateway. The Ambassador Edge Stack is free for all users, and includes all the functionality of the Ambassador API Gateway in addition to the additional capabilities mentioned above. Due to popular demand, we’re offering a free tier of our core features as part of the Ambassador Edge Stack, designed for startups.

There is one breaking change between Ambassador 0.85.0 and Edge Stack 1.0.0: the RateLimitService protocol pb.lyft.ratelimit.RateLimitService is no longer supported. RateLimitServices must now use the envoy.service.ratelimit.v2.RateLimitService.

UPCOMING PROTOCOL CHANGES

In a future version, Ambassador will change the version of the GRPC protocol used to communicate with AuthServices:

Resource Current version Upcoming version
AuthService envoy.service.auth.v2alpha envoy.service.auth.v2

These changes will not take effect until at least Ambassador 1.1.0. We expect to support both protocol versions during a transition period.

RELEASE NOTES

1.1.0 January 28, 2020

(Note that Ambassador 1.1.0 is identical to Ambassador 1.1.0-rc.0, from January 24, 2020. Also, we're now using "-rc.N" rather than just "-rcN", for better compliance with SemVer.

Ambassador API Gateway + Ambassador Edge Stack

  • Feature: support resources with the same name but in different namespaces (#2226, #2198)
  • Feature: support DNS overrides in edgectl
  • Bugfix: Reduce log noise about "kubestatus" updates
  • Bugfix: manage the diagnostics snapshot cache more aggressively to reduce memory footprint
  • Bugfix: re-enable Docker demo mode (and improve the test to make sure we don't break it again!) (#2227)
  • Bugfix: correct potential issue with building edgectl on Windows
  • Internal: fix an error with an undefined Python type in the TLS test (thanks, Christian Clauss!)

Ambassador Edge Stack only

  • Feature: make the External filter type fully compatible with the AuthService type
  • Docs: add instructions for what to do after downloading edgectl
  • Bugfix: make it much faster to apply the Edge Stack License
  • Bugfix: make sure the ACME terms-of-service link is always shown
  • Bugfix: make the Edge Policy Console more performant

1.0.0 January 15, 2020

Caution!

All of Ambassador's CRDs have been switched to apiVersion: getambassador.io/v2, and your resources will be upgraded when you apply the new CRDs. We recommend that you follow the migration instructions and check your installation's behavior before upgrading your CRDs.

Breaking changes

  • When a resource specifies a service or secret name without a corresponding namespace, Ambassador will now look for the service or secret in the namespace of the resource that mentioned it. In the past, Ambassador would look in the namespace in which Ambassador was running.

Features

  • The Host CR provides an easy way to tell Ambassador about domains it should expect to handle, and how it should handle secure and insecure requests for those domains
  • Redirection from HTTP to HTTPS defaults to ON when termination contexts are present
  • Mapping and Host CRs, as well as Ingress resources, get Status updates to provide better feedback
  • Improve performance of processing events from Kubernetes
  • Automatic HTTPS should work with any ACME clients doing the http-01 challenge

Bugfixes

  • CORS now happens before rate limiting
  • The reconfiguration engine is better protected from exceptions
  • Don’t try to check for upgrades on every UI snapshot update
  • Reduced reconfiguration churn
  • Don't force SNI routes to be lower-priority than non-SNI routes
  • Knative mappings fallback to the Ambassador namespace if no namespace is specified
  • Fix ambassador_id handling for Knative resources
  • Treat ambassadorId as a synonym for ambassador_id (ambassadorId is the Protobuf 3 canonical form of ambassador_id)

Ambassador Edge Stack

  • Authentication and ratelimiting are now available under a free community license
  • Given a Host CR, Ambassador can manage TLS certificates using ACME (or you can manage them by hand)
  • There is now an edgectl program that you can use for interacting with Ambassador from the command line
  • There is a web user-interface for Ambassador
  • BREAKING CHANGE: APP_LOG_LEVEL is now AES_LOG_LEVEL

1.0.0-rc6 January 15, 2020

  • AES: Bugfix: Fix ACME client with multiple replicas
  • AES: Bugfix: Fix ACME client race conditions with the API server and WATT
  • AES: Bugfix: Don't crash in the ACME client if Redis is unavailable

1.0.0-rc4 January 13, 2020

  • Change: Less verbose yet more useful Ambassador pod logs
  • Bugfix: Various bugfixes for listeners and route rejection
  • Bugfix: Don't append the service namespace for localhost
  • AES: Bugfix: Fix rendering mapping labels YAML in the webui
  • AES: Bugfix: Organize help output from edgectl so it is easier to read
  • AES: Bugfix: Various bugfixes around ACME support with manually-configured TLSContexts
  • AES: Change: Don't disable scout or enable extra-verbose logging when migrating from OSS
  • AES: BREAKING CHANGE: APP_LOG_LEVEL is now AES_LOG_LEVEL

1.0.0-rc1 January 11, 2020

  • Internal: Improvements to release machinery
  • Internal: Fix the dev shell
  • Internal: Adjust KAT tests to work with the Edge Stack

1.0.0-rc0 January 10, 2020

  • BREAKING CHANGE: Rename Host CR status field reason to errorReason
  • Feature: Host CRs now default .spec.hostname to .metadata.name
  • Feature: Host CRs now have a requestPolicy field to control redirecting from cleartext to TLS
  • Feature: Redirecting from cleartext to TLS no longer interferes with ACME http-01 challenges
  • Feature: Improved edgectl help and informational messages
  • Bugfix: Host CR status is now a sub-resource
  • Bugfix: Have diagd snapshot JSON not include "serialization" keys (which could potentially leak secrets)
  • Bugfix: Fix ambassador_id handling for Knative resources
  • Bugfix: Use the correct namespace for resources found via annotations
  • Bugfix: Treat ambassadorId as a synonym for ambassador_id (ambassadorId is the Protobuf 3 canonical form of ambassador_id)
  • Internal: Allow passing a DOCKER_NETWORK variable to the build-system

1.0.0-ea13 January 09, 2020

  • Bugfix: Knative mappings populate and fallback to the Ambassador namespace if unspecified
  • Internal: Knative tests for versions 0.7.1 and 0.8.0 were removed
  • Internal: Knative tests for version 0.11.0 were added
  • Internal: Improved performance with Edge Stack using /ambassador/v0/diag/ with an optional patch_client query param to send a partial representation in JSON Patch format, reducing the memory and network traffic for large deployments
  • Internal: Silencing warnings from which in docs preflight-check

1.0.0-ea12 January 08, 2020

  • BREAKING CHANGE: When a resource specifies a service or secret name without a corresponding namespace, Ambassador uses the namespace of the resource. In the past, Ambassador would use its own namespace.
  • Bugfix: Add the appropriate label so Ingress works with Edge Stack
  • Bugfix: Remove superfluous imagePullSecret
  • Bugfix: Fix various admin UI quirks, especially in Firefox
    • Bogus warnings about duplicate resources
    • Drag-and-drop reordering of rate limit configuration
    • Missing icons
  • Internal: Drop duplicated resources earlier in the processing chain
  • Internal: Streamline code generation from protobufs
  • Internal: Automated broken-link checks in the documentation

1.0.0-ea9 December 23, 2019

  • Bugfix: Use proper executable name for Windows edgectl
  • Bugfix: Don't force SNI routes to be lower-priority than non-SNI routes
  • Bugfix: Prevent the self-signed fallback context from conflicting with a manual context

1.0.0-ea7 December 19, 2019

  • Bugfix: UI buttons can hide themselves
  • Bugfix: Developer Portal API acquisition
  • Bugfix: Developer Portal internal routing
  • Internal: Better JS console usage
  • Internal: Rationalize usage reporting for Edge Stack

1.0.0-ea6 December 18, 2019

  • Feature: Improve performance of processing events from Kubernetes
  • Feature: Automatic HTTPS should work with any ACME clients doing the http-01 challenge
  • Internal: General improvements to test infrastructure
  • Internal: Improved the release process

ambassador-internal-access-control Filter and FilterPolicy are now created internally. Remove them from your cluster if upgrading from a previous version.

1.0.0-ea5 December 17, 2019

  • Internal: Improved the reliability of CI
  • Internal: Improved the release process

1.0.0-ea3 December 16, 2019

  • Feature: initial edgectl support for Windows!
  • UX: be explicit that seeing the license applied can take a few minutes
  • Bugfix: don’t try to check for upgrades on every UI snapshot update
  • Bugfix: don’t activate the fallback TLSContext if its secret is not available
  • Bugfix: first cut at reducing reconfiguration churn

1.0.0-ea1 December 10, 2019

Caution!

All of Ambassador's CRDs have been switched to apiVersion: getambassador.io/v2, and your resources will be upgraded when you apply the new CRDs. We recommend that you follow the migration instructions and check your installation's behavior before upgrading your CRDs.

Features

  • Authentication and ratelimiting are now available under a free community license
  • The Host CRD provides an easy way to tell Ambassador about domains it should expect to handle
  • Given a Host CRD, Ambassador can manage TLS certificates using ACME (or you can manage them by hand)
  • Redirection from HTTP to HTTPS defaults to ON when termination contexts are present
  • Mapping and Host CRDs, as well as Ingress resources, get Status updates to provide better feedback

Bugfixes

  • CVE-2019–18801, CVE-2019–18802, and CVE-2019–18836 are fixed by including Envoy 1.12.2
  • CORS now happens before rate limiting
  • The reconfiguration engine is better protected from exceptions

0.86.1 December 10, 2019

  • Envoy updated to 1.12.2 for security fixes
  • Envoy TCP keepalives are now supported (thanks, Bartek Kowalczyk!)
  • Envoy remote access logs are now supported
  • Correctly handle upgrades when the LogService CRD is not present

(Ambassador 0.86.0 was superseded by Ambassador 0.86.1.)

0.85.0 October 22, 2019

Features

  • Support configuring the Envoy access log format (thanks to John Esmet!)

0.84.1 October 20, 2019

Major changes:

  • Bugfix: Fix /ambassador permissions to allow running as non-root - Thanks @dmayle (https://github.com/dmayle) for reporting the bug.

0.84.0 October 18, 2019

Features:

  • Support setting window_bits for the GZip filter (thanks to Florent Delannoy!)
  • Correctly support tuning the regex_max_size, and bump its default to 200 (thanks to Paul Salaberria!)
  • Support setting redirect_cleartext_from in a TLSContext

Bugfixes:

  • Correctly update loadbalancer status of Ingress resources
  • Don't enable diagd debugging in the test suite unless explicitly requested (thanks to Jonathan Suever!)
  • Switch to an Envoy release build

Developer Notes:

  • Many many things about the build system have changed under the hood!
    • Start with make help, and
    • Join our Slack channel for more help!

0.83.0 October 08, 2019

Major changes:

  • Update Ambassador to address CVE-2019-15225 and CVE-2019-15226.

NOTE: this switches the default regex engine! See the documentation for the ambassador Module for more.

0.82.0 October 02, 2019

Major changes:

  • Feature: Arrange for the Prometheus metrics endpoint to also return associated headers (thanks, Jennifer Wu!)
  • Feature: Support setting a TLS origination context when doing TLS to a RateLimitService (thanks, Phil Peble!)
  • Feature: Allow configuring Envoy's access log path (thanks, Jonathan Suever!)
  • Update: Switch to Python 3.7 and Alpine 3.10

Developer notes:

  • Switch back to the latest mypy (currently 0.730)
  • Environment variable KAT_IMAGE_PULL_POLICY can override the imagePullPolicy when running KAT tests
  • Updated Generated Envoy Golang APIs

0.81.0 September 26, 2019

Major changes:

  • Feature: ${} environment variable interpolation is supported in all Ambassador configuration resources (thanks, Stefan Sedich!)
  • Feature: DataDog APM tracing is now supported (thanks again, Stefan Sedich!)
  • Bugfix: Fix an error in the TLSContext schema (thanks, @georgekaz!)

Developer notes:

  • Test services can now be built, deployed, and tested more easily (see BUILDING.md)
  • mypy is temporarily pinned to version 0.720.

0.80.0 September 20, 2019

Major changes:

  • Feature: Basic support for the Kubernetes Ingress resource
  • Feature: Basic reporting for some common configuration errors (lack of Mappings, lack of TLS contexts)
  • Bugfix: Update Envoy to prevent crashing when updating AuthService under load

Developer notes

  • Golang components now use Go 1.13
  • Ambassador build now requires clean type hinting
  • KAT client and server have been pulled back into the Ambassador repo

0.78.0 September 11, 2019

Major changes:

  • Feature: Support setting cipher_suites and ecdh_curves in TLSContext - #1782 (Thanks @teejaded)
  • Feature: Make 128-bits traceids the default - #1794 (Thanks @Pluies)
  • Feature: Set cap_net_bind_service to allow binding to low ports - #1720 (Thanks @swalberg)

Minor changes:

  • Testing: Add test that ambassador cli does not crash when called with --help - #1806 (Thanks @rokostik)

0.77.0 September 05, 2019

  • (Feature) Support the least_request load balancer policy (thanks, Steve Flanders!)
  • (Misc) Many test and release-engineering improvements under the hood

0.76.0 August 26, 2019

  • circuit breakers now properly handle overriding a global circuit breaker within a Mapping (#1767)
  • support for Knative 0.8.0 (#1732)

0.75.0 August 13, 2019

  • (Feature) Update to Envoy 1.11.1, including security fixes
  • (Feature) You can use a TLSContext without a secret to set origination options (#1708)
  • (Feature) Canary deployments can now use multiple host_rewrite values (#1159)
  • (Bugfix) Make sure that Ambassador won't mistakenly complain about the number of RateLimit and Tracing services (thanks, Christian Claus!)

0.74.1 August 06, 2019

  • (bugfix) Make sure that updates properly trigger reconfigures (#1727)
  • (misc) Arrange for startup logging to have timestamps

0.74.0 July 30, 2019

  • Bugfix: Make sure that the pod dies if Envoy dies
  • Bugfix: Correctly allow setting timeout_ms for AuthService (thanks, John Esmet!!)
  • Feature: Permit configuring cluster_idle_timeout_ms for upstream services (thanks, John Esmet!!) (#1542)

0.73.0 July 11, 2019

  • Feature: Experimental native support for Knative! (#1579)

  • Feature: Better Linkerd interoperability! (#1578, #1594)

  • Feature: Add a legend for the colors of service names on the diagnostic overview (thanks, Wyatt Pearsall!)

  • Feature: Allow switching Envoy to output JSON logs (thanks, Pedro Tavares!)

  • Feature: Allow setting AMBASSADOR_LABEL_SELECTOR and AMBASSADOR_FIELD_SELECTOR to let Ambassador use Kubernetes selectors to determine which things to read (thanks, John Esmet!) (#1292)

  • Feature: Allow configuring retries for AuthService (thanks, Kevin Dagostino!) (#1622, #1461)

  • Bugfix: Allow Ambassador to ride through Envoy-validation timeouts (thanks, John Morrisey!)

  • Bugfix: Allow Ambassador to ride through parse errors on input resources (thanks, Andrei Predoiu!) (#1625)

  • Bugfix: Allow '.' in a secret name to just be a '.' (#1255)

  • Bugfix: Allow manually defining an Ambassador Service resource, same as any other resource

  • Bugfix: Prevent spurious duplicate-resource errors when loading config from the filesystem

0.72.0 June 13, 2019

  • Envoy: Update Envoy to commit 8f57f7d765
  • Bugfix: Auth spans are now properly connected to requests (#1414)
  • Bugfix: include_body now works correctly (#1531, #1595)
  • Bugfix: x_forwarded_proto_redirect works again (thanks to Kyle Martin!) (#1571)
  • Bugfix: Ambassador works correctly with read-only filesystems (thanks, Niko Kurtti!) (#1614, #1619)
  • Bugfix: Correctly render groups associated with a given resolver in diagnostics JSON output
  • Feature: Give the Ambassador CLI a way to specify the directory into which to write secrets.

0.71.0 June 06, 2019

  • Feature: GZIP support #744
  • Feature: diag UI shows active Resolvers #1453
  • Feature: CRDs exist for Resolvers #1563
  • Feature: Resolvers with custom names work, even as CRDs #1497
  • Feature: The /metrics endpoint provides direct access to Prometheus-format stats (thanks to Rotem Tamir!)
  • Bugfix: statsd-exporter now correctly defaults to port 8125 (thanks to Jonathan Suever!)
  • Bugfix: redirect_cleartext_from no longer strips the URL path #1463
  • Bugfix: canary weights of 0 and 100 work correctly #1379
  • Bugfix: docker run works again for the Ambassador demo, and is part of our tests now #1569
  • Bugfix: Scout DEBUG messages don’t get leaked into the diag UI #1573
  • Maintenance: warn of upcoming protocol version changes
  • Maintenance: check in with Scout every 24 hours, but no more than twice per day

0.70.1 May 24, 2019

Minor changes:

  • Bugfix: Disable CRD support if Ambassador cannot access them
  • Upgrade: Upgrade to watt 0.5.1

0.70.0 May 20, 2019

Major changes:

  • Feature: Support CRDs in the getambassador.io API group for configuration (#482)
  • Feature: Update to Envoy 1.10

Minor changes:

  • Feature: Support removing request headers (thanks @ysaakpr!)
  • Bugfix: watt should better coalesce calls to the watch hook on startup
  • Bugfix: Ambassador no longer uses ports 7000 or 18000 (#1526, #1527)

0.61.1 May 16, 2019

  • Bugfix: Make sure that Consul discovery properly handles the datacenter name (#1533)
  • Bugfix: Make sure that the feature-walk code is protected against clusters with no endpoints at all (#1532)

0.61.0 May 08, 2019

Ambassador 0.61.0 metadata

Changes:

  • Feature: Support for minimum and maximum TLS versions (#689)
  • Feature: Allow choosing whether to append or overwrite when adding request or response headers (#1481) - thanks to @ysaakpr
  • Feature: Support for circuit breakers (#360)
  • Feature: Support for automatic retries (#1127) - thanks to @l1v3
  • Feature: Support for shadow traffic weighting - thanks to @nemo83
  • Feature: Support for HTTP/1.0 (#988) - thanks to @cyrus-mc
  • Bugfix: Problem with local Consul agent resolver and non-standard HTTP port (#1508)
  • Bugfix: Round each mapping's weight to an integer to prevent invalid Envoy configurations when using weights (#1289) - thanks to @esmet
  • Bugfix: Fix deadlock on invalid Envoy configuration (#1491) - thanks to @esmet
  • Bugfix: Fixed LightStep gRPC TracingService (#1189) - thanks to @sbaum1994

0.60.3 May 01, 2019

Changes since 0.60.2

  • When scanning its configuration for secrets and endpoints that must be watched, 0.60.2 could fail with certain configurations if TLS termination but not origination was active. Those failures are fixed now.

0.60.2 April 29, 2019

Changes since 0.60.1

  • Ambassador is now much more careful about which endpoints and secrets it pays attention to. (#1465 again -- thanks to @flands and @seandon for the help here!)

0.60.1 April 25, 2019

Changes since 0.60.0

  • Speed up initial parsing of WATT snapshots considerably (#1465)
  • Don't look at secrets in the kube-system namespace, or for service-account tokens.
  • Make sure that secrets we do look at are correctly associated with their namespaces (#1467 -- thanks to @flands and @derrickburns for their contributions here!)
  • Allow tuning the number of input snapshots retained for debugging
  • Include the grab-snapshots.py script to help with debuggability

0.60.0 April 23, 2019

Changes since 0.53.1

  • BREAKING CHANGE: Ambassador listens on 8080 and 8443 by default so it does not need to run as root
  • Ambassador natively supports using Consul for service discovery
  • AMBASSADOR_ENABLE_ENDPOINTS is no longer needed; configure using the Resolver resource instead
  • Support for the Maglev load balancing algorithm
  • Support connect_timeout_ms. Thanks to Pétur Erlingsson.
  • Support for idle_timeout_ms Thanks to Aaron Triplett.
  • Ambassador will properly reload renewed Let's Encrypt certificates (#1416). Thanks to Matthew Ceroni.
  • Ambassador will now properly redirect from HTTP to HTTPS based on x-forwarded-proto (#1233).
  • The case_sensitive field now works when host_redirect is set to true (#699). Thanks to Peter Choi and Christopher Coté.

0.53.1 April 5, 2019

(0.53.0 was immediately supplanted by 0.53.1.)

SECURITY FIXES

Ambassador 0.53.1 addresses two security issues in Envoy Proxy, CVE-2019-9900 and CVE-2019-9901:

  • CVE-2019-9900 (Score 8.3/High). When parsing HTTP/1.x header values, Envoy 1.9 and before does not reject embedded zero characters (NUL, ASCII 0x0).

  • CVE-2019-9901 (Score 8.3/High). Envoy does not normalize HTTP URL paths in Envoy 1.9 and before.

Since these issues can potentially allow a remote attacker to use maliciously-crafted URLs to bypass authentication, anyone running an Ambassador prior to 0.53.1 should upgrade.

UPCOMING CHANGES

Ambassador 0.60 will listen on ports 8080/8443 by default. The diagnostics service in Ambassador 0.52.0 will try to warn you if your configuration will be affected by this change.

Other changes since 0.52.1

  • AuthService version ambassador/v1 can now explicitly configure how much body data is sent to the external authentication service.

0.52.1 March 26, 2019

Changes since 0.52.0

  • You can specify the AMBASSADOR_NO_SECRETS environment variable to prevent Ambassador from watching Kubernetes secrets at all (thanks @esmet!) (#1293)
  • The services used when you do docker run ambassador --demo have been moved into the Docker image, to remove external dependencies from the Ambassador quickstart.

0.52.0 March 21, 2019

Changes since 0.51.2

  • Initial support for endpoint routing, rather than relying on kube-proxy (#1031)
    • set AMBASSADOR_ENABLE_ENDPOINTS in the environment to allow this
  • Initial support for Envoy ring hashing and session affinity (requires endpoint routing!)
  • Support Lua filters (thanks to @lolletsoc!)
  • Support gRPC-Web (thanks to @gertvdijk!) (#456)
  • Support for gRPC HTTP 1.1 bridge (thanks to @rotemtam!)
  • Allow configuring num-trusted-hosts for X-Forwarded-For
  • External auth services using gRPC can now correctly add new headers (#1313)
  • External auth services correctly add trace spans
  • Ambassador should respond to changes more quickly now (#1294, #1318)
  • Ambassador startup should be faster now

0.51.2 March 12, 2019

Changes since 0.51.1

  • Cookies are now correctly handled when using external auth services... really. (#1211)

0.51.1 March 11, 2019

Changes since 0.51.0

  • Ambassador correctly handles services in namespaces other than the one Ambassador is running in.

0.51.0 March 8, 2019

0.51.0 is not recommended: upgrade to 0.51.1.

Changes since 0.50.3

  • Ambassador can now route any TCP connection, using the new TCPMapping resource. (#420)
  • Cookies are now correctly handled when using external auth services (#1211)
  • Lots of work in docs and testing under the hood

Limitations in 0.51.0

At present, you cannot mix HTTP and HTTPS upstream services in any Ambassador resource. This restriction will be lifted in a future Ambassador release.

0.50.3 February 21, 2019

Fixes since 0.50.2

  • Ambassador saves configuration snapshots as it manages configuration changes. 0.50.3 keeps only 5 snapshots, to bound its disk usage. The most recent snapshot has no suffix; the -1 suffix is the next most recent, and the -4 suffix is the oldest.
  • Ambassador will not check for available updates more often than once every four hours.

Limitations in 0.50.3

At present, you cannot mix HTTP and HTTPS upstream services in any Ambassador resource. This restriction will be lifted in a future Ambassador release.

0.50.2 February 15, 2019

Important fixes since 0.50.1

  • Ambassador no longer requires annotations in order to start -- with no configuration, it will launch with only the diagnostics service available. (#1203)
  • If external auth changes headers, routing will happen based on the changed values. (#1226)

Other changes since 0.50.1

  • Ambassador will no longer log errors about Envoy statistics being unavaible before startup is complete (#1216)
  • The tls attribute is again available to control the client certificate offered by an AuthService (#1202)

Limitations in 0.50.2

At present, you cannot mix HTTP and HTTPS upstream services in any Ambassador resource. This restriction will be lifted in a future Ambassador release.

0.50.1 February 7, 2019

0.50.1 is not recommended: upgrade to 0.52.0.

Changes since 0.50.0

  • Ambassador defaults to only doing IPv4 DNS lookups. IPv6 can be enabled in the Ambassador module or in a Mapping. (#944)
  • An invalid Envoy configuration should not cause Ambassador to hang.
  • Testing using docker run and docker compose is supported again. (#1160)
  • Configuration from the filesystem is supported again, but see the "Running Ambassador" documentation for more.
  • Datawire's default Ambassador YAML no longer asks for any permissions for ConfigMaps.

0.50.0 January 29, 2019

Ambassador 0.50.0 is a major rearchitecture of Ambassador onto Envoy V2 using the ADS. See the "BREAKING NEWS" section above for more information.

(Note that Ambassador 0.50.0-rc7 and -rc8 were internal releases.)

Changes since 0.50.0-rc6

  • AMBASSADOR_SINGLE_NAMESPACE is finally correctly supported and properly tested (#1098)
  • Ambassador won't throw an exception for name collisions between resources (#1155)
  • A TLS Module can now coexist with SNI (the TLS Module effectively defines a fallback cert) (#1156)
  • ambassador dump --diag no longer requires you to explicitly state --v1 or --v2

Limitations in 0.50.0 GA

  • Configuration from the filesystem is not supported in 0.50.0. It will be resupported in 0.50.1.
  • A TLSContext referencing a secret in another namespace will not function when AMBASSADOR_SINGLE_NAMESPACE is set.

0.50.0-rc6 January 28, 2019

Ambassador 0.50.0-rc6 is a release candidate.

Changes since 0.50.0-rc5

  • Ambassador watches certificates and automatically updates TLS on certificate changes (#474)
  • Ambassador no longer saves secrets it hasn't been told to use to disk (#1093)
  • Ambassador correctly honors AMBASSADOR_SINGLE_NAMESPACE rather than trying to access all namespaces (#1098)
  • Ambassador correctly honors the AMBASSADOR_CONFIG_BASE_DIR setting again (#1118)
  • Configuration changes take effect much more quickly than in RC5 (#1148)
  • redirect_cleartext_from works with no configured secret, to support TLS termination at a downstream load balancer (#1104)
  • redirect_cleartext_from works with the PROXY protocol (#1115)
  • Multiple AuthService resources (for canary deployments) work again (#1106)
  • AuthService with allow_request_body works correctly with an empty body and no Content-Length header (#1140)
  • Mapping supports the bypass_auth attribute to bypass authentication (thanks, @patricksanders! #174)
  • The diagnostic service no longer needs to re-parse the configuration on every page load (#483)
  • Startup is now faster and more stable
  • The Makefile should do the right thing if your PATH has spaces in it (thanks, @er1c!)
  • Lots of Helm chart, statsd, and doc improvements (thanks, @Flydiverny, @alexgervais, @bartlett, @victortv7, and @zencircle!)

0.50.0-rc5 January 14, 2019

Ambassador 0.50.0-rc5 is a release candidate.

Changes since 0.50.0-rc4

  • Websocket connections will now be authenticated if an AuthService is configured #1026
  • Client certificate authentication should function whether configured from a TLSContext resource or from the the old-style TLS module (this is the full fix for [#993])
  • Ambassador can now switch listening ports without a restart (e.g. switching from cleartext to TLS) #1100
  • TLS origination certificates (including Istio mTLS) should now function #1071
  • The diagnostics service should function in all cases. #1096
  • The Ambassador image is significantly (~500MB) smaller than RC4.

0.50.0-rc4 January 9, 2019

Ambassador 0.50.0-rc4 is a release candidate, and fully supports running under Microsoft Azure.

Changes since 0.50.0-rc3

  • Ambassador fully supports running under Azure #1039
  • The proto attribute of a v1 AuthService is now optional, and defaults to http
  • Ambassador will warn about the use of v0 configuration resources.

0.50.0-rc3 January 3, 2019

Ambassador 0.50.0-rc3 is a release candidate, but see below for an important warning about Azure.

Microsoft Azure

There is a known issue with recently-created Microsoft Azure clusters where Ambassador will stop receiving service updates after running for a short time. This will be fixed in 0.50.0-GA.

Changes since 0.50.0-rc2

  • The Location and Set-Cookie headers should always be allowed from the auth service when using an ambassador/v0 config #1054
  • add_response_headers (parallel to add_request_headers) is now supported (thanks, @n1koo!)
  • host_redirect and shadow both now work correctly #1057, #1069
  • Kat is able to give better information when it cannot parse a YAML specification.

0.50.0-rc2 December 24, 2018

Ambassador 0.50.0-rc2 fixes some significant TLS bugs found in RC1.

Changes since 0.50.0-rc1:

  • TLS client certificate verification should function correctly (including requiring client certs).
  • TLS context handling (especially with multiple contexts and origination contexts) has been made more consistent and correct.
    • Ambassador is now much more careful about reporting errors in TLS configuration (especially around missing keys).
    • You can reference a secret in another namespace with secret: $secret_name.$namespace.
    • Ambassador will now save certificates loaded from Kubernetes to $AMBASSADOR_CONFIG_BASE_DIR/$namespace/secrets/$secret_name.
  • use_proxy_proto should be correctly supported #1050.
  • AuthService v1 will default its proto to http (thanks @flands!)
  • The JSON diagnostics service supports filtering: requesting /ambassador/v0/diag/?json=true&filter=errors, for example, will return only the errors element from the diagnostic output.

0.50.0-rc1 December 19, 2018

Ambassador 0.50.0-rc1 is a release candidate.

Changes since 0.50.0-ea7:

  • Websockets should work happily with external authentication #1026
  • A TracingService using a long cluster name works now #1025
  • TLS origination certificates are no longer offered to clients when Ambassador does TLS termination #983
  • Ambassador will listen on port 443 only if TLS termination contexts are present; a TLS origination context will not cause the switch
  • The diagnostics service is working, and correctly reporting errors, again. #1019
  • timeout_ms in a Mapping works correctly again #990
  • Ambassador sends additional anonymized usage data to help Datawire prioritize bug fixes, etc. See docs/ambassador/running.md for more information, including how to disable this function.

0.50.0-ea7 November 19, 2018

Ambassador 0.50.0-ea7 is an EARLY ACCESS release! IT IS NOT SUPPORTED FOR PRODUCTION USE.

Upcoming major changes:

  • API version ambassador/v0 will be officially deprecated in Ambassador 0.50.0. API version ambassador/v1 will the minimum recommended version for resources in Ambassador 0.50.0.

  • Some resources will change between ambassador/v0 and ambassador/v1.

    • For example, the Mapping resource will no longer support rate_limits as that functionality will be subsumed by labels.

Changes since 0.50.0-ea6:

  • Ambassador now supports labels for all Mappings.
  • Configuration of rate limits for a Mapping is now handled by providing labels in the domain configured for the RateLimitService (by default, this is "ambassador").
  • Ambassador, once again, supports statsd for statistics gathering.
  • The Envoy buffer filter is supported.
  • Ambassador can now use GRPC to call the external authentication service, and also include the message body in the auth call.
  • It's now possible to use environment variables to modify the configuration directory (thanks @n1koo!).
  • Setting environment variable AMBASSADOR_KUBEWATCH_NO_RETRY will cause the Ambassador pod to exit, and be rescheduled, if it loses its connection to the Kubernetes API server.
  • Many dependencies have been updated, most notably including switching to kube-client 8.0.0.

0.50.0-ea6 November 19, 2018

Ambassador 0.50.0-ea6 is an EARLY ACCESS release! IT IS NOT SUPPORTED FOR PRODUCTION USE.

Changes since 0.50.0-ea5:

  • alpn_protocols is now supported in the TLS module and TLSContexts
  • Using TLSContexts to provide TLS termination contexts will correctly switch Ambassador to listening on port 443.
  • redirect_cleartext_from is now supported with SNI
  • Zipkin TracingService configuration now supports 128-bit trace IDs and shared span contexts (thanks, @alexgervais!)
  • Zipkin should correctly trace calls to external auth services (thanks, @alexgervais!)
  • AuthService configurations now allow separately configuring headers allowed from the client to the auth service, and from the auth service upstream
  • Ambassador won't endlessly append :annotation to K8s resources
  • The Ambassador CLI no longer requires certificate files to be present when dumping configurations
  • make mypy will run full type checks on Ambassador to help developers

0.50.0-ea5 November 6, 2018

Ambassador 0.50.0-ea5 is an EARLY ACCESS release! IT IS NOT SUPPORTED FOR PRODUCTION USE.

Changes since 0.50.0-ea4:

  • use_remote_address is now set to true by default. If you need the old behavior, you will need to manually set use_remote_address to false in the ambassador Module.
  • Ambassador 0.50.0-ea5 supports SNI! See the docs for more here.
  • Header matching is now supported again, including host and method headers.

0.50.0-ea4 October 31, 2018

Ambassador 0.50.0-ea4 is an EARLY ACCESS release! IT IS NOT SUPPORTED FOR PRODUCTION USE.

Changes since 0.50.0-ea3:

  • Ambassador 0.50.0-ea4 uses Envoy 1.8.0.
  • RateLimitService is now supported. You will need to restart Ambassador if you change the RateLimitService configuration. We expect to lift this restriction in a later release; for now, the diag service will warn you when a restart is required.
    • The RateLimitService also has a new timeout_ms attribute, which allows overriding the default request timeout of 20ms.
  • GRPC is provisionally supported, but still needs improvements in test coverage.
  • Ambassador will correctly include its EA number when checking for updates.

0.50.0-ea3 October 21, 2018

Ambassador 0.50.0-ea3 is an EARLY ACCESS release! IT IS NOT SUPPORTED FOR PRODUCTION USE.

Changes since 0.50.0-ea2:

  • TracingService is now supported. You will need to restart Ambassador if you change the TracingService configuration. We expect to lift this restriction in a later release; for now, the diag service will warn you when a restart is required.
  • Websockets are now supported, including mapping the same websocket prefix to multiple upstream services for canary releases or load balancing.
  • KAT supports full debug logs by individual Test or Query.

Ambassador 0.50.0 is not yet feature-complete. Read the Limitations and Breaking Changes sections in the 0.50.0-ea1 section below for more information.

0.50.0-ea2 October 16, 2018

Ambassador 0.50.0-ea2 is an EARLY ACCESS release! IT IS NOT SUPPORTED FOR PRODUCTION USE.

Changes since 0.50.0-ea1:

  • Attempting to enable TLS termination without supplying a valid cert secret will result in HTTP on port 80, rather than HTTP on port 443. No error will be displayed in the diagnostic service yet. This is a bug and will be fixed in -ea3.
  • CORS is now supported.
  • Logs are no longer full of accesses from the diagnostic service.
  • KAT supports isolating OptionTests.
  • The diagnostics service now shows the V2 config actually in use, not V1.
  • make will no longer rebuild the Python venv so aggressively.

Ambassador 0.50.0 is not yet feature-complete. Read the Limitations and Breaking Changes sections in the 0.50.0-ea1 section below for more information.

0.50.0-ea1 October 11, 2018

Ambassador 0.50.0-ea1 is an EARLY ACCESS release! IT IS NOT SUPPORTED FOR PRODUCTION USE.

Ambassador 0.50.0 is not yet feature-complete. Limitations:

  • RateLimitService and TracingService resources are not currently supported.
  • WebSockets are not currently supported.
  • CORS is not currently supported.
  • GRPC is not currently supported.
  • TLS termination is not
  • statsd integration has not been tested.
  • The logs are very cluttered.
  • Configuration directly from the filesystem isn’t supported.
  • The diagnostics service cannot correctly drill down by source file, though it can drill down by route or other resources.
  • Helm installation has not been tested.
  • AuthService does not currently have full support for configuring headers to be sent to the extauth service. At present it sends all the headers listed in allowed_headers plus:
    • Authorization
    • Cookie
    • Forwarded
    • From
    • Host
    • Proxy-Authenticate
    • Proxy-Authorization
    • Set-Cookie
    • User-Agent
    • X-Forwarded-For
    • X-Forwarded-Host
    • X-Forwarded
    • X-Gateway-Proto
    • WWW-Authenticate

BREAKING CHANGES from 0.40.0

  • Configuration from a ConfigMap is no longer supported.

  • The authentication Module is no longer supported; use AuthService instead (which you probably already were).

  • External authentication now uses the core Envoy envoy.ext_authz filter, rather than the custom Datawire auth filter.

    • ext_authz speaks the same protocol, and your existing external auth services should work, however:
    • ext_authz does not send all the request headers to the external auth service (see above in Limitations).

  • Circuit breakers and outlier detection are not supported. They will be reintroduced in a later Ambassador release.

  • Ambassador now requires a TLS Module to enable TLS termination, where previous versions would automatically enable termation if the ambassador-certs secret was present. A minimal Module for the same behavior is:

      ---
  kind: Module
  name: tls
  config:
    server:
      secret: ambassador-certs

0.40.2 November 26, 2018

Minor changes:

  • Feature: Support using environment variables to modify the configuration directory (thanks @n1koo!)
  • Feature: In Helmfile, support volumeMounts (thanks @kyschouv!)
  • Bugfix: In Helmfile, correctly quote .Values.namespace.single (thanks @bobby!)
  • Bugfix: In Helmfile, correctly support Nodeport in HTTP and HTTPS (thanks @n1koo!)

0.40.1 October 29, 2018

Minor changes:

  • Feature: Support running Ambassador as a Daemonset via Helm (thanks @DipeshMitthalal!)
  • Feature: Switch to Envoy commit 5f795fe2 to fix a crash if attempting to add headers after using an AuthService (#647, #680)

0.40.0 September 25, 2018

Minor changes:

  • Feature: Allow users to override the STATSD_HOST value (#810). Thanks to @rsyvarth.
  • Feature: Support LightStep distributed tracing (#796). Thanks to @alexgervais.
  • Feature: Add service label in Helm chart (#778). Thanks to @sarce.
  • Feature: Add support for load balancer IP in Helm chart (#765). Thanks to @larsha.
  • Feature: Support prometheus mapping configurations (#746). Thanks to @bcatcho.
  • Feature: Add support for loadBalancerSourceRanges to Helm chart (#764). Thanks to @mtbdeano.
  • Feature: Support for namespaces and Ambassador ID in Helm chart (#588, #643). Thanks to @MichielDeMey and @jstol.
  • Bugfix: Add AMBASSADOR_VERIFY_SSL_FALSE flag (#782, #807). Thanks to @sonrier.
  • Bugfix: Fix Ambassador single namespace in Helm chart (#827). Thanks to @sarce.
  • Bugfix: Fix Helm templates and default values (#826).
  • Bugfix: Add stats-sink back to Helm chart (#763).
  • Bugfix: Allow setting timeout_ms to 0 for gRPC streaming services (#545). Thanks to @lovers36.
  • Bugfix: Update Flask to 0.12.3.

0.39.0 August 30, 2018

Major Changes:

  • BugFix: The statsd container has been removed by default in order to avoid DoSing Kubernetes DNS. The functionality can be re-enabled by setting the STATSD_ENABLED environment variable to true in the Ambassador deployment YAML (#568).
  • Docs: Added detailed Ambassador + Istio Integration Documentation on monitoring and distributed tracing. - @feitnomore

Minor Changes:

  • Docs: Added instructions for running Ambassador with Docker Compose. - @bcatcho
  • BugFix: Fix Ambassador to more aggressively reconnect to Kubernetes (#554). - @nmatsui
  • Feature: Diagnostic view displays AuthService, RateLimitService, and TracingService (#730). - @alexgervais
  • Feature: Enable Ambassador to tag tracing spans with request headers via tag_headers. - @alexgervais

0.38.0 August 08, 2018

Major changes:

  • Feature: Default CORS configuration can now be set - @KowalczykBartek
  • BugFix: Ambassador does not crash with empty YAML config anymore - @rohan47

Minor changes:

  • DevEx: master is now latest, stable tracks the latest released version
  • DevEx: release-prep target added to Makefile to facilitate releasing process
  • DevEx: all tests now run in parallel, consuming lesser time
  • BugFix: Ambassador SIGCHLD messages are less scary looking now

0.37.0 July 31, 2018:

Major changes:

  • Feature: Added support for request tracing (by Alex Gervais)

0.36.0 July 26, 2018:

Major changes:

  • Fix: HEAD requests no longer cause segfaults
  • Feature: TLS can now be configured with arbitrary secret names, instead of predefined secrets
  • Change: The Envoy dynamic header value %CLIENT_IP% is no longer supported. Use %DOWNSTREAM_REMOTE_ADDRESS_WITHOUT_PORT% instead. (This is due to a change in Envoy 1.7.0.)

0.35.3 July 18, 2018: READ THE WARNING ABOVE

Changed

Major changes:

  • Ambassador is now based on Envoy v1.7.0
  • Support for X-FORWARDED-PROTO based redirection, generally used with Layer 7 load balancers
  • Support for port based redirection using redirect_cleartext_from, generally used with Layer 4 load balancers
  • Specifying HTTP and HTTPS target ports in Helm chart

Other changes:

  • End-to-end tests can now be run with make e2e command
  • Helm release automation has been fixed
  • Mutliple end-to-end tests are now executed in parallel, taking lesser time
  • Huge revamp to documentation around unit tests
  • Documentation changes

0.35.2 July 5, 2018: READ THE WARNING ABOVE

Changed

  • 0.35.2 is almost entirely about updates to Datawire testing infrastructure.
  • The only user-visible change is that Ambassador will do a better job of showing which Kubernetes objects define Ambassador configuration objects when using AMBASSADOR_ID to run multiple Ambassadors in the same cluster.

0.35.1 June 25, 2018: READ THE WARNING ABOVE

Changed

  • Properly support supplying additional TLS configuration (such as redirect_cleartext_from) when using certificates from a Kubernetes Secret
  • Update Helm chart to allow customizing annotations on the deployed ambassador Kubernetes Service (thanks @psychopenguin!)

0.35.0 June 25, 2018: READ THE WARNING ABOVE

Changed

  • 0.35.0 re-supports websockets, but see the BREAKING NEWS for an important caveat.
  • 0.35.0 supports running as non-root. See the BREAKING NEWS above for more information.
  • Make sure regex matches properly handle backslashes, and properly display in the diagnostics service (thanks @alexgervais!).
  • Prevent kubewatch from falling into an endless spinloop (thanks @mechpen!).
  • Support YAML array syntax for CORS array elements.

0.34.3 June 13, 2018: READ THE WARNING ABOVE

Changed

  • 0.34.3 cannot support websockets: see the WARNING above.
  • Fix a possible crash if no annotations are found at all (#519).
  • Improve logging around service watching and such.

0.34.2 June 11, 2018: READ THE WARNING ABOVE

Changed

  • 0.34.2 cannot support websockets: see the WARNING above.
  • Ambassador is now based on Envoy 1.6.0!
  • Ambassador external auth services can now modify existing headers in place, as well as adding new headers.
  • Re-support the ambassador-cacert secret for configuring TLS client-certificate authentication. Note well that a couple of things have changed in setting this up: you'll use the key tls.crt, not fullchain.pem. See https://www.getambassador.io/reference/auth-tls-certs for more.

0.34.1 June 4, 2018

Bugfixes

  • Unbuffer log output for better diagnostics.
  • Switch to gunicorn instead of Werkzeug for the diag service.
  • Use the YAML we release as the basis for end-to-end testing.

0.34.0 May 16, 2018

Changed

  • When originating TLS, use the host_rewrite value to set outgoing SNI. If no host_rewrite is set, do not use SNI.
  • Allow disabling external access to the diagnostics service (with thanks to @alexgervais and @dougwilson).

0.33.1 May 16, 2018

Changed

  • Fix YAML error on statsd pod.

0.33.0 May 14, 2018

Changed

  • Fix support for host_redirect in a Mapping. See the Mapping documentation for more details: the definition of the host_redirect attribute has changed.

0.32.2 May 2, 2018

(Note that 0.32.1 was an internal release.)

Changed

  • Fix a bad bootstrap CSS inclusion that would cause the diagnostic service to render incorrectly.

0.32.0 April 27, 2018

Changed

  • Traffic shadowing is supported using the shadow attribute in a Mapping
  • Multiple Ambassadors can now run more happily in a single cluster
  • The diagnostic service will now show you what AuthService configuration is active
  • The tls keyword now works for AuthService just like it does for Mapping (thanks @dvavili!)

0.31.0 April 12, 2018

Changed

  • Rate limiting is now supported (thanks, @alexgervais!) See the docs for more detail here.
  • The statsd container has been quieted down yet more (thanks again, @alexgervais!).

0.30.2 March 26, 2018

Changed

  • drop the JavaScript statsd for a simple socat-based forwarder
  • ship an Ambassador Helm chart (thanks @stefanprodan!)
    • Interested in testing Helm? See below!
  • disable Istio automatic sidecar injection (thanks @majelbstoat!)
  • clean up some doc issues (thanks @lavoiedn and @endrec!)

To test Helm, make sure you have helm installed and that you have tiller properly set up for your RBAC configuration. Then:

helm repo add datawire https://www.getambassador.io

helm upgrade --install --wait my-release datawire/ambassador

You can also use adminService.type=LoadBalancer.

0.30.1 March 26, 2018

Fixed

  • The tls module is now able to override TLS settings probed from the ambassador-certs secret

0.30.0 March 23, 2018

Changed

  • Support regex matching for prefix (thanks @radu-c!)
  • Fix docs around AuthService usage

0.29.0 March 15, 2018

Changed

  • Default restart timings have been increased. This will cause Ambassador to respond to service changes less quickly; by default, you'll see changes appear within 15 seconds.
  • Liveness and readiness checks are now enabled after 30 seconds, rather than 3 seconds, if you use our published YAML.
  • The statsd container is now based on mhart/alpine-node:9 rather than :7.
  • envoy_override has been reenabled in Mappings.

0.28.1 March 5, 2018 (and 0.28.0 on March 2, 2018)

(Note that 0.28.1 is identical to 0.28.0, and 0.27.0 was an internal release. These are related to the way CI generates tags, which we'll be revamping soon.)

Changed

  • Support tuning Envoy restart parameters
  • Support host_regex, method_regex, and regex_headers to allow regular expression matches in Mappings
  • Support use_proxy_proto and use_remote_address in the ambassador module
  • Fine-tune the way we sort a Mapping based on its constraints
  • Support manually setting the precedence of a Mapping, so that there's an escape hatch when the automagic sorting gets it wrong
  • Expose alpn_protocols in the tls module (thanks @technicianted!)
  • Make logs a lot quieter
  • Reorganize and update documentation
  • Make sure that ambassador dump --k8s will work correctly
  • Remove a dependency on a ConfigMap for upgrade checks

0.26.0 February 13, 2018

Changed

  • The authentication module is deprecated in favor of the AuthService resource type.
  • Support redirecting cleartext connections on port 80 to HTTPS on port 443
  • Streamline end-to-end tests and, hopefully, allow them to work well without Kubernaut
  • Clean up some documentation (thanks @lavoiedn!)

0.25.0 February 6, 2018

(Note that 0.24.0 was an internal release.)

Changed

  • CORS support (thanks @alexgervais!)
  • Updated docs for
    • GKE
    • Ambassador + Istio
    • Ordering of Mappings
    • Prometheus with Ambassador
  • Support multiple external authentication service instances, so that canarying extauth services is possible
  • Correctly support timeout_ms in a Mapping
  • Various build tweaks and end-to-end test speedups

0.23.0 January 17, 2018

Changed

  • Clean up build docs (thanks @alexgervais!)
  • Support add_request_headers for, uh, adding requests headers (thanks @alexgervais!)
  • Make end-to-end tests and Travis build process a bit more robust
  • Pin to Kubernaut 0.1.39
  • Document the use of the develop branch
  • Don't default to imagePullAlways
  • Switch to Alpine base with a stripped Envoy image

0.22.0 January 17, 2018

Changed

  • Switched to using quay.io rather than DockerHub. If you are not using Datawire's published Kubernetes manifests, you will have to update your manifests!
  • Switched to building over Alpine rather than Ubuntu. (We're still using an unstripped Envoy; that'll change soon.)
  • Switched to a proper production configuration for the statsd pod, so that it hopefully chews up less memory.
  • Make sure that Ambassador won't generate cluster names that are too long for Envoy.
  • Fix a bug where Ambassador could crash if there were too many egregious errors in its configuration.

0.21.1 January 11, 2018

Changed

  • Ambassador will no longer generate cluster names that exceed Envoy's 60-character limit.

0.21.0 January 3, 2018

Changed

  • If AMBASSADOR_SINGLE_NAMESPACE is present in the environment, Ambassador will only look for services in its own namespace.
  • Ambassador Mapping objects now correctly support host_redirect, path_redirect, host_rewrite, auto_host_rewrite, case_sensitive, use_websocket, timeout_ms, and priority.

0.20.1 December 22, 2017

Changed

  • If Ambassador finds an empty YAML document, it will now ignore it rather than raising an exception.
  • Includes the namespace of a service from an annotation in the name of its generated YAML file.
  • Always process inputs in the same order from run to run.

0.20.0 December 18, 2017

Changed

  • Switch to Envoy 1.5 under the hood.
  • Refocus the diagnostic service to better reflect what's actually visible when you're working at Ambassador's level.
  • Allow the diagnostic service to display, and change, the Envoy log level.

0.19.2 December 12, 2017

Changed

  • Arrange for logs from the subsystem that watches for Kubernetes service changes (kubewatch) to have timestamps and such.
  • Only do new-version checks every four hours.

0.19.1 December 4, 2017

Changed

  • Allow the diag service to look good (well, OK, not too horrible anyway) when Ambassador is running with TLS termination.
  • Show clusters on the overview page again.
  • The diag service now shows you the "health" of a cluster by computing it from the number of requests to a given service that didn't involve a 5xx status code, rather than just forwarding Envoy's stat, since we don't configure Envoy's stat in a meaningful way yet.
  • Make sure that the tests correctly reported failures (sigh).
  • Allow updating out-of-date diagnostic reports without requiring multiple test runs.

0.19.0 November 30, 2017

Changed

  • Ambassador can now use HTTPS upstream services: just use a service that starts with https:// to enable it.
    • By default, Ambassador will not offer a certificate when using HTTPS to connect to a service, but it is possible to configure certificates. Please contact us on Slack if you need to do this.
  • HTTP access logs appear in the normal Kubernetes logs for Ambassador.
  • It’s now possible to tell ambassador config to read Kubernetes manifests from the filesystem and build a configuration from the annotations in them (use the --k8s switch).
  • Documentation on using Ambassador with Istio now reflects Ambassador 0.19.0 and Istio 0.2.12.

0.18.2 November 28, 2017

Changed

  • The diagnostics service will now tell you when updates are available.

0.18.0 November 20, 2017

Changed

  • The Host header is no longer overwritten when Ambassador talks to an external auth service. It will now retain whatever value the client passes there.

Fixed

  • Checks for updates weren’t working, and they have been restored. At present you’ll only see them in the Kubernetes logs if you’re using annotations to configure Ambassador — they’ll start showing up in the diagnostics service in the next release or so.

0.17.0 November 14, 2017

Changed

  • Allow Mappings to require matches on HTTP headers and Host
  • Update tests, docs, and diagnostic service for header matching

Fixed

  • Published YAML resource files will no longer overwrite annotations on the Ambassador service when creating the Ambassador deployment

0.16.0 November 10, 2017

Changed

  • Support configuring Ambassador via annotations on Kubernetes services
  • No need for volume mounts! Ambassador can read configuration and TLS-certificate information directly from Kubernetes to simplify your Kubernetes YAML
  • Expose more configuration elements for Envoy routes: host_redirect, path_redirect, host_rewrite, auto_host_rewrite, case_sensitive, use_websocket, timeout_ms, and priority get transparently copied

Fixed

  • Reenable support for gRPC

0.15.0 October 16, 2017

Changed

  • Allow docker run to start Ambassador with a simple default configuration for testing
  • Support host_rewrite in mappings to force the HTTP Host header value for services that need it
  • Support envoy_override in mappings for odd situations
  • Allow asking the diagnostic service for JSON output rather than HTML

0.14.2 October 12, 2017

Changed

  • Allow the diagnostic service to show configuration errors.

0.14.0 October 5, 2017

Changed

  • Have a diagnostic service!
  • Support cert_required in TLS config

0.13.0 September 25, 2017

Changed

  • Support using IP addresses for services.
  • Check for collisions, so that trying to e.g. map the same prefix twice will report an error.
  • Enable liveness and readiness probes, and have Kubernetes perform them by default.
  • Document the presence of the template-override escape hatch.

0.12.1 September 22, 2017

Changed

  • Notify (in the logs) if a new version of Ambassador is available.

0.12.0 September 21, 2017

Changed

  • Support for non-default Kubernetes namespaces.
  • Infrastructure for checking if a new version of Ambassador is available.

0.11.2 September 20, 2017

Changed

  • Better schema verification.

0.11.1 September 18, 2017

Changed

  • Do schema verification of input YAML files.

0.11.0 September 18, 2017

Changed

  • Declarative Ambassador! Configuration is now via YAML files rather than REST calls
  • The ambassador-store service is no longer needed.

0.10.14 September 15, 2017

Fixed

  • Update demo-qotm.yaml with the correct image tag.

0.10.13 September 5, 2017

Changed

  • Properly support proxying all methods to an external authentication service, with headers intact, rather than moving request headers into the body of an HTTP POST.

0.10.12 August 2, 2017

Changed

  • Make TLS work with standard K8s TLS secrets, and completely ditch push-cert and push-cacert.

Fixed

  • Move Ambassador out from behind Envoy, so that you can use Ambassador to fix things if you completely botch your Envoy config.
  • Let Ambassador keep running if Envoy totally chokes and dies, but make sure the pod dies if Ambassador loses access to its storage.

0.10.10 August 1, 2017

Fixed

  • Fix broken doc paths and simplify building as a developer. 0.10.8, 0.10.9, and 0.10.10 were all stops along the way to getting this done; hopefully we'll be able to reduce version churn from here on out.

0.10.7 July 25, 2017

Changed

  • More CI-build tweaks.

0.10.6 July 25, 2017

Changed

  • Fix automagic master build tagging

0.10.5 July 25, 2017

Changed

  • Many changes to the build process and versioning. In particular, CI no longer has to commit files.

0.10.1 July 3, 2017

Added

  • Changelog

0.10.0 June 30, 2017

Added

  • Ambassador supports GRPC services (and other HTTP/2-only services) using the GRPC module

Fixed

  • Minor typo in Ambassador's Dockerfile that break some versions of Docker

0.9.1 June 28, 2017

Changed

  • Made development a little easier by automating dev version numbers so that modified Docker images update in Kubernetes
  • Updated BUILDING.md

0.9.0 June 23, 2017

Added

  • Ambassador supports HTTP Basic Auth
  • Ambassador now has the concept of modules to enable and configure optional features such as auth
  • Ambassador now has the concept of consumers to represent end-users of mapped services
  • Ambassador supports auth via an external auth server

Basic auth is covered in Getting Started. Learn about modules and consumers and see an example of external auth in About Mappings, Modules, and Consumers.

Changed

  • State management (via Ambassador store) has been refactored
  • Switched to Ambassador-Envoy for the base Docker image

0.8.12 June 07, 2017

Added

  • Mappings can now be updated

0.8.11 May 24, 2017

Added

Fixed

  • Bug in mapping change detection
  • Release machinery issues

0.8.6 May 05, 2017

Added

  • Ambassador releases are now performed by Travis CI

0.8.2 May 04, 2017

Changed

  • Documentation updates

0.8.0 May 02, 2017

Added

Changed

  • Ambassador's admin interface is now on local port 8888 while mappings are available on port 80/443 depending on whether TLS is enabled
  • Multiple instances of Ambassador talking to the same Ambassador Store pod will pick up each other's changes automatically

0.7.0 May 01, 2017

Added

  • Ambassador can rewrite the request URL path prefix before forwarding the request to your service (covered in Getting Started)
  • Ambassador supports additional stats aggregators: Datadog, Grafana

Changed

  • Services are now known as mappings
  • Minikube is supported again

0.6.0 April 28, 2017

Removed

  • The Ambassador SDS has been removed; Ambassador routes to service names

0.5.2 April 26, 2017

Added

  • Ambassador includes a local statsd so that full stats from Envoy can be collected and pushed to a stats aggregator (Prometheus is supported)

Changed

  • It's easier to develop Ambassador thanks to improved build documentation and Makefile fixes

0.5.0 April 13, 2017

Added

  • Ambassador supports inbound TLS
  • YAML for a demo user service is now included

Changed

  • The geturl script supports Minikube and handles AWS better
  • Documentation and code cleanup

0.4.0 April 07, 2017

Changed

  • Ambassador now reconfigures Envoy automatically once changes have settled for five seconds
  • Envoy stats and Ambassador stats are separate
  • Mappings no longer require specifying the port as it is not needed

Fixed

  • SDS does the right thing with unnamed ports

0.3.1 April 06, 2017

Added

  • Envoy stats accessible through Ambassador
  • Basic interpretation of cluster stats

Changed

  • Split up ambassador.py into multiple files
  • Switch to a debug build of Envoy

0.1.9 April 03, 2017

Changed

  • Ambassador configuration on /ambassador-config/ prefix rather than exposed on port 8001
  • Updated to current Envoy and pinned the Envoy version
  • Use Bumpversion for version management
  • Conditionalized Docker push

Fixed

  • Ambassador keeps running with an empty services list (part 2)

0.1.5 March 31, 2017

Fixed

  • Ambassador SDS correctly handles ports

0.1.4 March 31, 2017

Changed

  • Ambassador keeps running with an empty services list
  • Easier to run with Telepresence

0.1.3 March 31, 2017

Added

  • Initial Ambassador
  • Ambassador service discovery service
  • Documentation

Based on Keep a Changelog. Ambassador follows Semantic Versioning.