forked from raspberrypi/pico-examples
-
Notifications
You must be signed in to change notification settings - Fork 0
/
pcf8523_i2c.c
164 lines (131 loc) · 6.4 KB
/
pcf8523_i2c.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
/**
* Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <stdio.h>
#include <string.h>
#include "pico/stdlib.h"
#include "pico/binary_info.h"
#include "hardware/i2c.h"
/* Example code to talk to a PCF8520 Real Time Clock module
Connections on Raspberry Pi Pico board, other boards may vary.
GPIO PICO_DEFAULT_I2C_SDA_PIN (On Pico this is 4 (physical pin 6)) -> SDA on PCF8520 board
GPIO PICO_DEFAULT_I2C_SCK_PIN (On Pico this is 5 (physical pin 7)) -> SCL on PCF8520 board
5V (physical pin 40) -> VCC on PCF8520 board
GND (physical pin 38) -> GND on PCF8520 board
*/
#ifdef i2c_default
// By default these devices are on bus address 0x68
static int addr = 0x68;
static void pcf8520_reset() {
// Two byte reset. First byte register, second byte data
// There are a load more options to set up the device in different ways that could be added here
uint8_t buf[] = {0x00, 0x58};
i2c_write_blocking(i2c_default, addr, buf, 2, false);
}
static void pcf820_write_current_time() {
// buf[0] is the register to write to
// buf[1] is the value that will be written to the register
uint8_t buf[2];
//Write values for the current time in the array
//index 0 -> second: bits 4-6 are responsible for the ten's digit and bits 0-3 for the unit's digit
//index 1 -> minute: bits 4-6 are responsible for the ten's digit and bits 0-3 for the unit's digit
//index 2 -> hour: bits 4-5 are responsible for the ten's digit and bits 0-3 for the unit's digit
//index 3 -> day of the month: bits 4-5 are responsible for the ten's digit and bits 0-3 for the unit's digit
//index 4 -> day of the week: where Sunday = 0x00, Monday = 0x01, Tuesday... ...Saturday = 0x06
//index 5 -> month: bit 4 is responsible for the ten's digit and bits 0-3 for the unit's digit
//index 6 -> year: bits 4-7 are responsible for the ten's digit and bits 0-3 for the unit's digit
//NOTE: if the value in the year register is a multiple for 4, it will be considered a leap year and hence will include the 29th of February
uint8_t current_val[7] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
for (int i = 3; i < 10; ++i) {
buf[0] = i;
buf[1] = current_val[i - 3];
i2c_write_blocking(i2c_default, addr, buf, 2, false);
}
}
static void pcf8520_read_raw(uint8_t *buffer) {
// For this particular device, we send the device the register we want to read
// first, then subsequently read from the device. The register is auto incrementing
// so we don't need to keep sending the register we want, just the first.
// Start reading acceleration registers from register 0x3B for 6 bytes
uint8_t val = 0x03;
i2c_write_blocking(i2c_default, addr, &val, 1, true); // true to keep master control of bus
i2c_read_blocking(i2c_default, addr, buffer, 7, false);
}
void pcf8520_set_alarm() {
// buf[0] is the register to write to
// buf[1] is the value that will be written to the register
uint8_t buf[2];
// Default value of alarm register is 0x80
// Set bit 8 of values to 0 to activate that particular alarm
// Index 0 -> minute: bits 4-5 are responsible for the ten's digit and bits 0-3 for the unit's digit
// Index 1 -> hour: bits 4-6 are responsible for the ten's digit and bits 0-3 for the unit's digit
// Index 2 -> day of the month: bits 4-5 are responsible for the ten's digit and bits 0-3 for the unit's digit
// Index 3 -> day of the week: where Sunday = 0x00, Monday = 0x01, Tuesday... ...Saturday = 0x06
uint8_t alarm_val[4] = {0x01, 0x80, 0x80, 0x80};
// Write alarm values to registers
for (int i = 10; i < 14; ++i) {
buf[0] = (uint8_t) i;
buf[1] = alarm_val[i - 10];
i2c_write_blocking(i2c_default, addr, buf, 2, false);
}
}
void pcf8520_check_alarm() {
// Check bit 3 of control register 2 for alarm flags
uint8_t status[1];
uint8_t val = 0x01;
i2c_write_blocking(i2c_default, addr, &val, 1, true); // true to keep master control of bus
i2c_read_blocking(i2c_default, addr, status, 1, false);
if ((status[0] & 0x08) == 0x08) {
printf("ALARM RINGING");
} else {
printf("Alarm not triggered yet");
}
}
void pcf8520_convert_time(int conv_time[7], const uint8_t raw_time[7]) {
// Convert raw data into time
conv_time[0] = (10 * (int) ((raw_time[0] & 0x70) >> 4)) + ((int) (raw_time[0] & 0x0F));
conv_time[1] = (10 * (int) ((raw_time[1] & 0x70) >> 4)) + ((int) (raw_time[1] & 0x0F));
conv_time[2] = (10 * (int) ((raw_time[2] & 0x30) >> 4)) + ((int) (raw_time[2] & 0x0F));
conv_time[3] = (10 * (int) ((raw_time[3] & 0x30) >> 4)) + ((int) (raw_time[3] & 0x0F));
conv_time[4] = (int) (raw_time[4] & 0x07);
conv_time[5] = (10 * (int) ((raw_time[5] & 0x10) >> 4)) + ((int) (raw_time[5] & 0x0F));
conv_time[6] = (10 * (int) ((raw_time[6] & 0xF0) >> 4)) + ((int) (raw_time[6] & 0x0F));
}
#endif
int main() {
stdio_init_all();
#if !defined(i2c_default) || !defined(PICO_DEFAULT_I2C_SDA_PIN) || !defined(PICO_DEFAULT_I2C_SCL_PIN)
#warning i2c/pcf8520_i2c example requires a board with I2C pins
puts("Default I2C pins were not defined");
#else
printf("Hello, PCF8520! Reading raw data from registers...\n");
// This example will use I2C0 on the default SDA and SCL pins (4, 5 on a Pico)
i2c_init(i2c_default, 400 * 1000);
gpio_set_function(PICO_DEFAULT_I2C_SDA_PIN, GPIO_FUNC_I2C);
gpio_set_function(PICO_DEFAULT_I2C_SCL_PIN, GPIO_FUNC_I2C);
gpio_pull_up(PICO_DEFAULT_I2C_SDA_PIN);
gpio_pull_up(PICO_DEFAULT_I2C_SCL_PIN);
// Make the I2C pins available to picotool
bi_decl(bi_2pins_with_func(PICO_DEFAULT_I2C_SDA_PIN, PICO_DEFAULT_I2C_SCL_PIN, GPIO_FUNC_I2C));
pcf8520_reset();
pcf820_write_current_time();
pcf8520_set_alarm();
pcf8520_check_alarm();
uint8_t raw_time[7];
int real_time[7];
char days_of_week[7][12] = {"Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday"};
while (1) {
pcf8520_read_raw(raw_time);
pcf8520_convert_time(real_time, raw_time);
printf("Time: %02d : %02d : %02d\n", real_time[2], real_time[1], real_time[0]);
printf("Date: %s %02d / %02d / %02d\n", days_of_week[real_time[4]], real_time[3], real_time[5], real_time[6]);
pcf8520_check_alarm();
sleep_ms(500);
// Clear terminal
printf("\e[1;1H\e[2J");
}
#endif
return 0;
}