Skip to content

Latest commit

 

History

History
119 lines (92 loc) · 4.49 KB

README.md

File metadata and controls

119 lines (92 loc) · 4.49 KB
Raw

SSH Password Logging

Disclaimer:

I know this is a security risk. Any machines this module is enacted on should have no confidential/personal information on it, and should not be shared with any other users. Really, the machine this work is done on should only be used for this work and nothing else. Any real authentication should take place via public-key authentication to completely avoid going through this specific PAM setup. In fact, you may be unable to log in with username and password authentication after applying these changes. See issue #1.

Key changes

Many hours were spent with unsuccessful PAM set ups. This is because previous versions of ssh + PAM allowed changes to be placed in what turns out to be completely different files. To set up password logging in a few simple steps, one can do the following:

Note: This was done on an Ubuntu 16.04 instance running on DigitalOcean's servers. Slight changes in other OS's or versions may cause these exact steps to fail.

  1. Create a build directory. Mine looked like this:
$ mkdir /usr/build
  1. Clone this repository
$ cd /usr/build
$ git clone https://github.com/cameron-gagnon/ssh_pass_logging.git
  1. Make the pam_storepw.so file
$ cd ssh_pass_logging
$ make
  1. Edit the PAM file
$ vim /etc/pam.d/common-auth

Insert the lines prepended with '+'s in between the lines that already exist. DON'T ACTUALLY INSERT THE '+'s INTO THE FILE, JUST THE TEXT AFTER THEM.

auth [success=1 default=ignore] pam_unix.so nullok_secure

+ # custom PAM module
+ auth optional pam_storepw.so

#here's the fallback if no module succeeds
auth requisite pam_deny.so
  1. Go back to your build directory and install the file.
$ cd /usr/build/ssh_pass_logging
$ make install

This will also restart ssh and reload the new changes.

  1. ❓❓❓

  2. 🔥 🔥 🔥 Profit 🔥 🔥 🔥

Logged Password Output

This will now log output in the form of:

time <Y-M-D H-M-S> : host = <IP_ADDR> : username = <USERNAME> : password = <PASSWORD>

to the /var/log/passwords file.

Troubleshooting

Send me a message or create an issue! Also, check to make sure that "UsePAM yes" exists in your /etc/sshd_config file and that password based authentication is enabled. In my case I use public key authentication by default when setting up a VPS on DigitalOcean, so PasswordAuthentication is disabled by default. Finally, make sure that PermitRootLogin is enabled so that ssh will allow attempts to log in as the root user.

$ cat /etc/ssh/sshd_config | grep "UsePAM"
UsePAM yes
$ cat /etc/ssh/sshd_config | grep "PasswordAuthentication"
PasswordAuthentication yes
# PasswordAuthentication.  Depending on your PAM configuration,
# PAM authentication, then enable this but set PasswordAuthentication
$ cat /etc/ssh/sshd_config | grep "PermitRootLogin"
PermitRootLogin yes
# the setting of "PermitRootLogin without-password".

Important Note:

Only usernames that exist on the system will have password data logged to the output. A more descriptive answer can be found here, and can be seen by exploring the auth-pam.c file in ssh's source. This is because of the way sshd + PAM work together. It is in a larger part to prevent timing attacks against the system. However, if logging passwords for non-existent users is important, one can build ssh from source and modify the module to log incorrect passwords before the "fake" password is set. A patch to do this can be found here. Otherwise, the owner of the system can periodically check for other common usernames in /var/log/passwords and create fake accounts with those usernames so the full data can be logged. Two scripts to easily create dummy accounts can be accessed in this repository under honeypot_user.sh and create_initial_users.sh.

Reference/Sources

This work is done based on inspiration from seeing the /var/log/auth.log file. After some light research, further inspiration came from here. The technical work is based on this and this. The Makefile was adapted from here.