Releases: aws/amazon-vpc-cni-k8s
Releases · aws/amazon-vpc-cni-k8s
v1.13.4
v1.13.4
Changes since v1.13.3
- Bug - RefreshSecurityGroups must be called after unmanaged ENIs are set (@jdn5126 )
- Bug - Fix event recorder initialization and add check to log (@jdn5126 )
To manually apply this release:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.4/config/master/aws-k8s-cni.yaml
Note that the following regions use different manifests:
us-gov-east-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.4/config/master/aws-k8s-cni-us-gov-east-1.yaml
us-gov-west-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.4/config/master/aws-k8s-cni-us-gov-west-1.yaml
cn:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.4/config/master/aws-k8s-cni-cn.yaml
To apply this release using helm:
Follow the installation instructions in https://github.com/aws/amazon-vpc-cni-k8s/blob/v1.13.4/charts/aws-vpc-cni/README.md#installing-the-chart
Verify the update:
$ kubectl describe daemonset aws-node -n kube-system | grep Image | cut -d "/" -f 2
amazon-k8s-cni-init:v1.13.4
amazon-k8s-cni:v1.13.4
To manually apply this release for CNI Metrics Helper:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.4/config/master/cni-metrics-helper.yaml
Note that the following regions use different manifests:
us-gov-east-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.4/config/master/cni-metrics-helper-us-gov-east-1.yaml
us-gov-west-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.4/config/master/cni-metrics-helper-us-gov-west-1.yaml
cn:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.4/config/master/cni-metrics-helper-cn.yaml
To apply this release using helm for CNI Metrics Helper:
Follow the installation instructions in https://github.com/aws/amazon-vpc-cni-k8s/blob/v1.13.4/charts/cni-metrics-helper/README.md#installing-the-chart
Verify the update for CNI Metrics Helper:
$ kubectl describe deployment cni-metrics-helper -n kube-system | grep Image | cut -d "/" -f 2
cni-metrics-helper:v1.13.4
Contributors
jdn5126
Assets 2
v1.13.3
v1.13.3
The major improvement in v1.13.3 is a decrease in memory utilization and API server requests for the aws-node pod. One note to point out is that for IPv6 clusters, we used to file an event on startup when aws-node did not have IAM permissions to assign IPv6 addresses to pods. Now, we just log and allow aws-node pod to crash and restart.
Changes since v1.13.2
- Bug - Decrease memory usage by K8S Clients (@jdn5126 )
- Documentation - update docs and CNI logging (@jdn5126 )
- Improvement - Updates instance limits including c7gn (@mmerkes )
To manually apply this release:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.3/config/master/aws-k8s-cni.yaml
Note that the following regions use different manifests:
us-gov-east-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.3/config/master/aws-k8s-cni-us-gov-east-1.yaml
us-gov-west-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.3/config/master/aws-k8s-cni-us-gov-west-1.yaml
cn:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.3/config/master/aws-k8s-cni-cn.yaml
To apply this release using helm:
Follow the installation instructions in https://github.com/aws/amazon-vpc-cni-k8s/blob/v1.13.3/charts/aws-vpc-cni/README.md#installing-the-chart
Verify the update:
$ kubectl describe daemonset aws-node -n kube-system | grep Image | cut -d "/" -f 2
amazon-k8s-cni-init:v1.13.3
amazon-k8s-cni:v1.13.3
To manually apply this release for CNI Metrics Helper:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.3/config/master/cni-metrics-helper.yaml
Note that the following regions use different manifests:
us-gov-east-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.3/config/master/cni-metrics-helper-us-gov-east-1.yaml
us-gov-west-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.3/config/master/cni-metrics-helper-us-gov-west-1.yaml
cn:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.3/config/master/cni-metrics-helper-cn.yaml
To apply this release using helm for CNI Metrics Helper:
Follow the installation instructions in https://github.com/aws/amazon-vpc-cni-k8s/blob/v1.13.3/charts/cni-metrics-helper/README.md#installing-the-chart
Verify the update for CNI Metrics Helper:
$ kubectl describe deployment cni-metrics-helper -n kube-system | grep Image | cut -d "/" -f 2
cni-metrics-helper:v1.13.3
Contributors
mmerkes and jdn5126
Assets 2
v1.13.2
v1.13.2
Changes since v1.13.0
- Bug - Sync node security groups to cache before node initialization (@jdn5126 )
- Improvement - Fix hard-coded nitro instance types: p4de.24xlarge and c7g.metal (@jdn5126 )
- Improvement - Upgrade to Go 1.20 and apply dependabot updates (@jdn5126 )
- Improvement - Set iptables mode automatically and deprecate ENABLE_NFTABLES (@jdn5126 )
- Improvement - Upgrade client-go and controller-runtime modules (@jdn5126 )
To manually apply this release:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.2/config/master/aws-k8s-cni.yaml
Note that the following regions use different manifests:
us-gov-east-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.2/config/master/aws-k8s-cni-us-gov-east-1.yaml
us-gov-west-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.2/config/master/aws-k8s-cni-us-gov-west-1.yaml
cn:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.2/config/master/aws-k8s-cni-cn.yaml
To apply this release using helm:
Follow the installation instructions in https://github.com/aws/amazon-vpc-cni-k8s/blob/v1.13.2/charts/aws-vpc-cni/README.md#installing-the-chart
Verify the update:
$ kubectl describe daemonset aws-node -n kube-system | grep Image | cut -d "/" -f 2
amazon-k8s-cni-init:v1.13.2
amazon-k8s-cni:v1.13.2
To manually apply this release for CNI Metrics Helper:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.2/config/master/cni-metrics-helper.yaml
Note that the following regions use different manifests:
us-gov-east-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.2/config/master/cni-metrics-helper-us-gov-east-1.yaml
us-gov-west-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.2/config/master/cni-metrics-helper-us-gov-west-1.yaml
cn:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.2/config/master/cni-metrics-helper-cn.yaml
To apply this release using helm for CNI Metrics Helper:
Follow the installation instructions in https://github.com/aws/amazon-vpc-cni-k8s/blob/v1.13.2/charts/cni-metrics-helper/README.md#installing-the-chart
Verify the update for CNI Metrics Helper:
$ kubectl describe deployment cni-metrics-helper -n kube-system | grep Image | cut -d "/" -f 2
cni-metrics-helper:v1.13.2
Contributors
jdn5126
Assets 2
v1.13.0
v1.13.0
VPC CNI version v1.13.0 adds support for the ENABLE_V6_EGRESS feature: https://github.com/aws/amazon-vpc-cni-k8s/tree/release-1.13#enable_v6_egress-v1130, which allows pods in an IPv4 cluster to connect to IPv6 endpoints.
Changes since v1.12.6
- Bug - Increase datastore pool at startup (@jdn5126 )
- Bug - Deallocate IP address according to warm IP target when multiple enis are present (@bikashmishra100 )
- Bug - Return success from CNI DEL when IPAMD is unreachable (@jdn5126 )
- Bug - Fix for aws-vpc-cni chart with tolerations to produce syntax valid yaml (@Bourne-ID )
- Bug - adding ip check for annotatePod in ipamd (@jerryhe1999 )
- Feature - Introduce DISABLE_LEAKED_ENI_CLEANUP to disable leaked ENI cleanup task (@jdn5126 )
- Feature - Add IPv6 egress support to eks IPv4 cluster (@wanyufe )
- Feature - feat(chart): Refactored image template logic for endpoint flexibility (@stevehipwell )
- Feature - add AWS_EC2_ENDPOINT variable for custom endpoint (@jihunseol )
- Improvement - Refactor egress-v4-cni plugin to support unit testing (@wanyufe )
- Improvement - Update instance limits and core plugins version in preparation for upcoming VPC CNI release (@jdn5126 )
- Improvement - refactoring eniconfig func to only take node as parameter (@haouc )
- Improvement - Remove go mod download from Dockerfiles (@jdn5126 )
- Improvement - Add apiVersion to MY_NODE_NAME (@jdn5126 )
- Improvement - install all core CNI plugins via init container (@jdn5126 )
- Improvement - Make all the aws vpc cni environmental variables case insensitive (@jerryhe1999 )
- Improvement - resource limit on init container in eks addon (@pdeva )
- Testing - Add integration test for POD v4/v6 egress traffic (@wanyufe )
To manually apply this release:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.0/config/master/aws-k8s-cni.yaml
Note that the following regions use different manifests:
us-gov-east-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.0/config/master/aws-k8s-cni-us-gov-east-1.yaml
us-gov-west-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.0/config/master/aws-k8s-cni-us-gov-west-1.yaml
cn:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.0/config/master/aws-k8s-cni-cn.yaml
To apply this release using helm:
Follow the installation instructions in https://github.com/aws/amazon-vpc-cni-k8s/blob/v1.13.0/charts/aws-vpc-cni/README.md#installing-the-chart
Verify the update:
$ kubectl describe daemonset aws-node -n kube-system | grep Image | cut -d "/" -f 2
amazon-k8s-cni-init:v1.13.0
amazon-k8s-cni:v1.13.0
To manually apply this release for CNI Metrics Helper:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.0/config/master/cni-metrics-helper.yaml
Note that the following regions use different manifests:
us-gov-east-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.0/config/master/cni-metrics-helper-us-gov-east-1.yaml
us-gov-west-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.0/config/master/cni-metrics-helper-us-gov-west-1.yaml
cn:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.13.0/config/master/cni-metrics-helper-cn.yaml
To apply this release using helm for CNI Metrics Helper:
Follow the installation instructions in https://github.com/aws/amazon-vpc-cni-k8s/blob/v1.13.0/charts/cni-metrics-helper/README.md#installing-the-chart
Verify the update for CNI Metrics Helper:
$ kubectl describe deployment cni-metrics-helper -n kube-system | grep Image | cut -d "/" -f 2
cni-metrics-helper:v1.13.0
Contributors
bikashmishra100, pdeva, and 7 other contributors
Assets 2
v1.11.5
v1.11.5
Changes since v1.11.4:
To apply this release:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.11.5/config/master/aws-k8s-cni.yaml
Verify the update:
$ kubectl describe daemonset aws-node -n kube-system | grep Image | cut -d "/" -f 2
amazon-k8s-cni-init:v1.11.5
amazon-k8s-cni:v1.11.5
Contributors
jdn5126
Assets 2
v1.12.6
v1.12.6
Changes since v1.12.5
- Bug - Fix MTU parameter in egress-v4-cni plugin (@jdn5126 )
- Documentation - Fixing the log message to be meaningful (@rajeeshckr )
- Improvement - Add bmn-sf1.metal instance support (@vpineda1996 )
- Improvement - Support routing to external IPs behind service (@jdn5126 )
- Improvement - Use Go 1.19; fix egress-v4-cni MTU parsing, update containerd (@jdn5126 )
- Improvement - Added enviroment variable to allow ipamd to manage the ENIs on a non schedulable node (@rajeeshckr )
- Improvement - Use GET for IAM Permissions event; update controller-runtime from 0.13.1 to 0.14.4 and client-go from v0.25.5 to v0.26.1 (@jdn5126 )
- Improvement - Remove old checkpoint migration logic; update containerd version (@jdn5126 )
To manually apply this release:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.6/config/master/aws-k8s-cni.yaml
Note that the following regions use different manifests:
us-gov-east-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.6/config/master/aws-k8s-cni-us-gov-east-1.yaml
us-gov-west-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.6/config/master/aws-k8s-cni-us-gov-west-1.yaml
cn:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.6/config/master/aws-k8s-cni-cn.yaml
To apply this release using helm:
Follow the installation instructions in https://github.com/aws/amazon-vpc-cni-k8s/blob/v1.12.6/charts/aws-vpc-cni/README.md#installing-the-chart
Verify the update:
$ kubectl describe daemonset aws-node -n kube-system | grep Image | cut -d "/" -f 2
amazon-k8s-cni-init:v1.12.6
amazon-k8s-cni:v1.12.6
To manually apply this release for CNI Metrics Helper:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.6/config/master/cni-metrics-helper.yaml
Note that the following regions use different manifests:
us-gov-east-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.6/config/master/cni-metrics-helper-us-gov-east-1.yaml
us-gov-west-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.6/config/master/cni-metrics-helper-us-gov-west-1.yaml
cn:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.6/config/master/cni-metrics-helper-cn.yaml
To apply this release using helm for CNI Metrics Helper:
Follow the installation instructions in https://github.com/aws/amazon-vpc-cni-k8s/blob/v1.12.6/charts/cni-metrics-helper/README.md#installing-the-chart
Verify the update for CNI Metrics Helper:
$ kubectl describe deployment cni-metrics-helper -n kube-system | grep Image | cut -d "/" -f 2
cni-metrics-helper:v1.12.6
Contributors
rajeeshckr, vpineda1996, and jdn5126
Assets 2
v1.12.5
v1.12.5
Changes since v1.12.2
- Bug - Handle private IP exceeded error (@jayanthvn )
- Documentation - doc: document AWS_VPC_K8S_CNI_LOGLEVEL for cni-metric-helper helm chart (@csantanapr )
- Documentation - Added cni-metrics-helper docs (@0xquark )
- Improvement - Update golang builder image (@jdn5126 )
- Improvement - Update golang builder image (@jdn5126 )
- Improvement - run make generate-limits (@jdn5126 )
- Improvement - Add M7g, R7g instance (@Issacwww )
- Improvement - Update client-go and k8s packages (@jaydeokar )
- Improvement - Refactor cni-metrics-helper chart for eks charts release (@jdn5126 )
- Improvement - fix: Upgrade to golang.org/x/[email protected] (@ellistarn )
To manually apply this release:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.5/config/master/aws-k8s-cni.yaml
Note that the following regions use different manifests:
us-gov-east-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.5/config/master/aws-k8s-cni-us-gov-east-1.yaml
us-gov-west-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.5/config/master/aws-k8s-cni-us-gov-west-1.yaml
cn:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.5/config/master/aws-k8s-cni-cn.yaml
To apply this release using helm:
Follow the installation instructions in https://github.com/aws/amazon-vpc-cni-k8s/blob/v1.12.5/charts/aws-vpc-cni/README.md#installing-the-chart
Verify the update:
$ kubectl describe daemonset aws-node -n kube-system | grep Image | cut -d "/" -f 2
amazon-k8s-cni-init:v1.12.5
amazon-k8s-cni:v1.12.5
To manually apply this release for CNI Metrics Helper:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.5/config/master/cni-metrics-helper.yaml
Note that the following regions use different manifests:
us-gov-east-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.5/config/master/cni-metrics-helper-us-gov-east-1.yaml
us-gov-west-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.5/config/master/cni-metrics-helper-us-gov-west-1.yaml
cn:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.5/config/master/cni-metrics-helper-cn.yaml
To apply this release using helm for CNI Metrics Helper:
Follow the installation instructions in https://github.com/aws/amazon-vpc-cni-k8s/blob/v1.12.5/charts/cni-metrics-helper/README.md#installing-the-chart
Verify the update for CNI Metrics Helper:
$ kubectl describe deployment cni-metrics-helper -n kube-system | grep Image | cut -d "/" -f 2
cni-metrics-helper:v1.12.5
Contributors
csantanapr, jayanthvn, and 5 other contributors
Assets 2
v1.12.2
v1.12.2
Changes since v1.12.1
- Bug - Cherry-pick prometheus/client_golang module update to address CVE (@jdn5126)
- Improvement - Minimal base image for cni-metrics-helper minimal base image (@jdn5126 )
To manually apply this release:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.2/config/master/aws-k8s-cni.yaml
Note that the following regions use different manifests:
us-gov-east-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.2/config/master/aws-k8s-cni-us-gov-east-1.yaml
us-gov-west-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.2/config/master/aws-k8s-cni-us-gov-west-1.yaml
cn:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.2/config/master/aws-k8s-cni-cn.yaml
To apply this release using helm:
Follow the installation instructions in https://github.com/aws/amazon-vpc-cni-k8s/blob/v1.12.2/charts/aws-vpc-cni/README.md#installing-the-chart
Verify the update:
$ kubectl describe daemonset aws-node -n kube-system | grep Image | cut -d "/" -f 2
amazon-k8s-cni-init:v1.12.2
amazon-k8s-cni:v1.12.2
To manually apply this release for CNI Metrics Helper:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.2/config/master/cni-metrics-helper.yaml
Note that the following regions use different manifests:
us-gov-east-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.2/config/master/cni-metrics-helper-us-gov-east-1.yaml
us-gov-west-1:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.2/config/master/cni-metrics-helper-us-gov-west-1.yaml
cn:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.12.2/config/master/cni-metrics-helper-cn.yaml
Verify the update for CNI Metrics Helper:
$ kubectl describe deployment cni-metrics-helper -n kube-system | grep Image | cut -d "/" -f 2
cni-metrics-helper:v1.12.2
Contributors
jdn5126
Assets 2
v1.10.4
v1.10.4
This release updated the dependencies of CNI(CNI binaries/Golang)
Changes since v1.10.3:
- Improvement - Update CNI dependency versions (@orsenthil)
To apply this release:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.10.4/config/master/aws-k8s-cni.yaml
Contributors
orsenthil
Assets 2
v1.10.3
This release addresses the IP leak Issue caused by empty NetNS in certain scenarios along with few other important changes
- Upgrade AWS SDK GO (Thanks @jayanthvn ) #1944
- Fix dependabot high sev issue caused by GoGo protobuf (Thanks @jayanthvn ) #1942
- Fixed empty netns bug (Thanks @cgchinmay ) #1941
- C7g instances support (Thanks @jayanthvn ) #1940
- Enable Prefix Delegation on Bare metal instances (Thanks @achevuru ) #1937
To apply this release:
kubectl apply -f https://raw.githubusercontent.com/aws/amazon-vpc-cni-k8s/v1.10.3/config/master/aws-k8s-cni.yaml
Verify the update:
$ kubectl describe daemonset aws-node -n kube-system | grep Image | cut -d "/" -f 2
amazon-k8s-cni-init:v1.10.3
amazon-k8s-cni:v1.10.3
Contributors
jayanthvn, cgchinmay, and achevuru