Skip to content

Latest commit

 

History

History
34 lines (29 loc) · 1.13 KB

sdcard_burn.md

File metadata and controls

34 lines (29 loc) · 1.13 KB
Raw

Writing the SD card image onto the SD card

The size of the SD card that is going to be used to write the image to, must be equal or greater than the size of the image. Writing the image on the SD card will take about 15 to 20 minutes for a 16GB image, depending on the transfer speed of the system being used.

Linux

  • Make sure that xz-utils are installed on your machine 
    sudo apt-get install xz-utils
  • Unpack the .tar.xz archive 
    tar -xf name-of-the-image.tar.xz
  • Write the image on the SD card 
    dd if=name-of-the-image.img of=/dev/xxx bs=4M
sync

Note 1: The following command can be used to help identifying the device that needs to be specified for the argument of=/dev/xxx:

    lsblk

Note 2: It is very likely that the dd command will have to be executed with sudo privileges:

    sudo dd if=name-of-the-image.img of=/dev/xxx bs=4M

Windows

  • Unpack the .tar.xz archive using 7-Zip
  • Install the balenaEtcher app
  • Write the .img file to the SD card using the balenaEtcher app