Secure USB DFU1.1 bootloader for STM32

Features

• Small size. Fits in 4K ROM segment (ASM or no encription, otherwise a bit more).
• USB DFU1.1 compatible
• supports by dfu-util
• Supports one of the following ciphers
  • No encryption
  • ARCFOUR stream cipher
  • CHACHA20 stream cipher
  • RC5-32/12/16 block cipher (C and ASM implementation)
  • RC6-32/20/16 block cipher (C and ASM implementation)
  • GOST R 34.12-2015 "MAGMA" block cipher
  • RAIDEN block cipher
  • SPECK 64/128 block cipher
  • XTEA (classic and XTEA-1) block cipher
  • RTEA block cipher
  • BLOWFISH type block cipher
  • Rijndael AES-128/192/256 block cipher
• Cipher modes for block ciphers
  • Electronic Codebook (ECB)
  • Cipher Block Chaining (CBC)
  • Propagating CBC (PCBC)
  • Cipher Feedback (CFB)
  • Output Feedback (OFB)
  • Counter (CTR)
• Frmware verification signature
  • CRC (CRC32, CRC64)
  • Fowler-Noll-Vo (FNV-1A-32, FNV1A-64)
• Different interfaces for flash and eeprom programming
• Autoseal using RDP level 1 or 2 (prevents reading decrypted FW trough debug interface). Be careful when you set RDP to level 2. This operation is irreversible and disables all debug functions and option bytes programming.
• Software for firmaware encryption/decription included
• Supported STM32 family
  • STM32L0x2
  • STM32L1xx
  • STM32L476xx (OTG FS in device mode)
  • STM32F103
  • STM32F105, STM32F107 (OTG FS in device mode)
  • STM32F0 series
  • STM32F3 series
  • STM32F4 series
  • STM32G4 series

Generic flow

Usage:

Configure bootloader

Bootloader can be configured trough the make parameters. See CONFIG.md for details.

Building bootloader

1. Prerequisites

• GNU make
• arm-none-eabi-gcc toolchaipren v4.9 or later to build bootloader
• gcc toolchain to build fwcrypt software
• CMSIS V4 or CMSIS V5.
• Device peripheral access layer header files for STM32. See Vendor Template for details.
• stm32.h STM32 universal header
• optional st-util tool to program bootloader

2. Makefile targets

• make prerequisites to download required libs and headers
• make mcu_target to build bootloader
• make program to flash bootloader using st-flash
• make crypter to build encryption software

3. Makefile and environmental variables

Variable	Default Value	Description
CMSIS	CMSIS	path to CMSIS root folder
CMSISDEV	$(CMSIS)/Device	path to CMSIS device folder
OUTDIR	build	output folder for binaries
FWNAME	firmware	name for bootloader binary
SWNAME	fwcrypt	name for encrypter binary

4. MCU targets

mcu_target	MCU	remarks
stm32l100x6a	STM32L100C6-A
stm32l100x8a	STM32L100R8-A
stm32l100xba	STM32L100RB-A
stm32l100xc	STM32L100RC	tested
stm32l151x6a	STM32L151C6-A, STM32L151R6-A
stm32l151x8a	STM32L151C8-A, STM32L151R8-A, STM31L151V8-A
stm32l151xba	STM32L151CB-A, STM32L151RB-A, STM31L151VB-A
stm32l151xc	STM32L151CC, STM32L151QC, SRM32L151RC, STM32L151UC
stm32l151xd	STM32L151QD, STM32L151RD, STM32L151VD, STM32L151ZD
stm32l151xe	STM32L151QE, STM32L151RE, STM32L151VE, STM32L151ZE
stm32l152x6a	STM32L152C6-A, STM32L152R6-A
stm32l152x8a	STM32L152C8-A, STM32L152R8-A, STM31L152V8-A
stm32l152xba	STM32L152CB-A, STM32L152RB-A, STM31L152VB-A
stm32l152xc	STM32L152CC, STM32L152QC, SRM32L152RC, STM32L152UC
stm32l152xd	STM32L152QD, STM32L152RD, STM32L152VD, STM32L152ZD
stm32l152xe	STM32L152QE, STM32L152RE, STM32L152VE, STM32L152ZE
stm32l162xc	STM32L162RC, STM32L162VC
stm32l162xd	STM32L162QD, STM32L156RD, STM32L162VD, STM32L162ZD
stm32l162xe	STM32L162QE, STM32L156RE, STM32L162VE, STM32L162ZE
stm32l052x6	STM32L052K6, STM32L052T6, STM32L052C6, STM32L052R6
stm32l052x8	STM32L052K8, STM32L052T8, STM32L052C8, STM32L052R8	tested, default
stm32l053x6	STM32L053C6, STM32L053R6
stm32l053x8	STM32L053C8, STM32L053R8
stm32l062x8	STM32L062K8
stm32l063x8	STM32L063C8, STM32L063R8
stm32l072v8	STM32L072V8
stm32l072xb	STM32L072KB, STM32L072CB, STM32L072RB, STM32L072VB
stm32l072xz	STM32L072KZ, STM32L072CZ, STM32L072RZ, STM32L072VZ
stm32l073v8	STM32L073V8
stm32l073xb	STM32L073CB, STM32L073RB, STM32L073VB
stm32l073xz	STM32L073CZ, STM32L073RZ, STM32L073VZ
stm32l476xc	STM32L476RC, STM32L476VC
stm32l476xe	STM32L476RE, STM32L476JE, STM32L476ME, STM32L476VE
stm32l476xg	STM32L476RG, STM32L476JG, STM32L476MG, STM32L476VG	tested
stm32f103x6	STM32F103T6, STM32F103C6, STM32F103R6
stm32f103x8	STM32F103T8, STM32F103C8, STM32F103R8, STM32f103V8	tested
stm32f105xb	STM32F105RB, STM32F105VB	tested
stm32f107xb	STM32F107RB, STM32F107VB	tested
stm32l433xb	STM32L433CB, STM32L433RB
stm32l433xc	STM32L433CC, STM32L433RC, STM32L433VC	tested
stm32f070x6	STM32F070C6
stm32f070xb	STM32F070CB	tested
stm32f429xe	STM32F429xE series (single bank mode)
stm32f429xg	STM32F429xG series (single bank mode)
stm32f429xi	STM32F429xI series (single and dual bank)	teted
stm32g431x6	STM32G431x6, STM32G441x6
stm32g431x8	STM32G431x8, STM32G441x8
stm32g431xb	STM32G431xB, STM32G441xB	tested G431RB
stm32g474xb	STM32G471xB, STM32G473xB, STM32G474xB, STM32G483xB
stm32g474xc	STM32G471xC, STM32G473xC, STM32G474xC, STM32G483xC
stm32g474xe	STM32G471xE, STM32G473xE, STM32G474xE, STM32G483xE	tested G747RE
stm32f303xe	STM32F303xE	tested
stm32f373xc	STM32F373xC	tested

Adjusting user firmware

• check bootloader's linker map for the __app_start address. This is the new ROM origin for the user firmware (isr vectors).
• Adjust your linker script to set new ROM origin and ROM length

Utilizing usbd core and usbd driver from bootloader in the user firmware

• check bootloader's linker map for the usbd_poll entry point and usbd driver (usbd_devfs, usbd_otgfs, e.t.c. depends used MCU). It's located just after .isr_vector section
• add address for usbd_driver structure to your linker script. For example usbd_drv = 0x08000040;
• add address for usbd_poll entry point to your linker script. For example usbd_poll = 0x08000074;
• add extern struct usbd_driver usbd_drv; driver declaration to your code
• include at least "usbd_core.h" and "usb_std.h" to your code

Now you can use usbd core and driver from bootloader in your application. Don't forget to set GPIO and RCC for USB according to MCU requirements.

Activating bootloader

• put DFU_BOOTKEY on DFU_BOOTKEY_ADDR (RAM top by default) and make a software reset
• by DFU_BOOTSTRAP_PIN on DFU_BOOTSTRAP_PORT on startup (optional)
• make a double reset in DFU_DBLRESET_MS period (optional)

Encryption/Decryption user firmware

At this moment only binary files supported

To encrypt:

fwcrypt -e -i infile.bin -o outfile.bin

To decrypt:

fwcrypt -d -i infile.bin -o outfile.bin