The PCF8574/74A provides general-purpose remote I/O expansion via the two-wire bidirectional I2C-bus (serial clock (SCL), serial data (SDA)).The devices consist of eight quasi-bidirectional ports, 100 kHz I2C-bus interface, three hardware address inputs and interrupt output operating between 2.5 V and 6 V. The quasi-bidirectional port can be independently assigned as an input to monitor interrupt status or keypads, or as an output to activate indicator devices such as LEDs. System master can read from the input port or write to the output port through a single register. The low current consumption of 2.5 uA (typical, static) is great for mobile applications and the latched output ports directly drive LEDs.The PCF8574 and PCF8574A are identical, except for the different fixed portion of the slave address. The three hardware address pins allow eight of each device to be on the same I2C-bus, so there can be up to 16 of these I/O expanders PCF8574/74A together on the same I2C-bus, supporting up to 128 I/Os (for example, 128 LEDs).The active LOW open-drain interrupt output (INT) can be connected to the interrupt logic of the microcontroller and is activated when any input state differs from its corresponding input port register state. It is used to indicate to the microcontroller that an input state has changed and the device needs to be interrogated without the microcontroller continuously polling the input register via the I2C-bus.The internal Power-On Reset (POR) initializes the I/Os as inputs with a weak internal pull-up 100 uA current source. PCF8574 is used in LED signs and displays, servers, key pads, industrial control, medical equipment, PLC, cellular telephones, mobile devices, gaming machines and instrumentation test measurement.
LibDriver PCF8574 is a full function driver of PCF8574 launched by LibDriver.It provides I/O writing, I/O reading and other functions.
/src includes LibDriver PCF8574 source files.
/interface includes LibDriver PCF8574 IIC platform independent template。
/test includes LibDriver PCF8574 driver test code and this code can test the chip necessary function simply。
/example includes LibDriver PCF8574 sample code.
/doc includes LibDriver PCF8574 offline document.
/datasheet includes PCF8574 datasheet。
/project includes the common Linux and MCU development board sample code. All projects use the shell script to debug the driver and the detail instruction can be found in each project's README.md.
Reference /interface IIC platform independent template and finish your platform IIC driver.
Add /src, /interface and /example to your project.
volatile uint8_t res;
pcf8574_pin_level_t level;
/* basic init */
res = pcf8574_basic_init(PCF8574_ADDRESS_A000);
if (res)
{
return 1;
}
...
/* read pin */
res = pcf8574_basic_read(PCF8574_PIN_0, (pcf8574_pin_level_t *)&level);
if (res)
{
pcf8574_basic_deinit();
return 1;
}
/* write pin */
res = pcf8574_basic_write(PCF8574_PIN_0, PCF8574_PIN_LEVEL_HIGH);
if (res)
{
pcf8574_basic_deinit();
return 1;
}
...
pcf8574_basic_deinit();
return 0;Online documents: https://www.libdriver.com/docs/pcf8574/index.html
Offline documents: /doc/html/index.html
Please sent an e-mail to [email protected]
Copyright (c) 2015 - present LibDriver All rights reserved
The MIT License (MIT)
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
Please sent an e-mail to [email protected]