Skip to content

Latest commit

 

History

History
148 lines (112 loc) · 5.26 KB

how_to_tune_control_parameters.md

File metadata and controls

148 lines (112 loc) · 5.26 KB
Raw

How to Tune Control Parameters

Introduction

The objective of the control module is to generate control commands to the vehicle based on planning trajectory and the current car status.

Background

Input / Output

Input

  • Planning trajectory
  • Current car status
  • HMI driving mode change request
  • Monitor System

Output

The output control command governs functions such as steering, throttle, and brake in the canbus.

Controller Introduction

The controllers include a lateral controller that manages the steering commands and a longitudinal controller that manages the throttle and brakes commands .

Lateral Controller

The lateral controller is an LQR-Based Optimal Controller. The dynamic model of this controller is a simple bicycle model with side slip. It is divided into two categories, including a closed loop and an open loop.

  • The closed loop provides discrete feedback LQR controller with 4 states:
    • Lateral Error
    • Lateral Error Rate
    • Heading Error
    • Heading Error Rate
  • The open loop utilizes the path curvature information to cancel the constant steady state heading error.

Longitudinal Controller

The longitudinal controller is configured as a cascaded PID + Calibration table. It is divided into two categories, including a closed loop and an open loop.

  • The closed loop is a cascaded PID (station PID + Speed PID), which takes the following data as controller input:
    • Station Error
    • Speed Error
  • The open loop provides a calibration table which maps acceleration onto throttle/brake percentages.

Controller Tuning

Useful tools

Tool like diagnostics and realtime_plot are useful for controller tuning and can be found under apollo/modules/tools/.

Lateral Controller Tuning

The lateral controller is designed for minimal tuning effort. The basic lateral controller tuning steps for all vehicles are:

  1. Set all elements in matrix_q to zero.

  2. Increase the third element of matrix_q, which defines the heading error weighting, to minimize the heading error.

  3. Increase the first element of matrix_q, which defines the lateral error weighting to minimize the lateral error.

Tune a Lincoln MKZ

For a Lincoln MKZ, there are four elements that refer to the diagonal elements of the state weighting matrix Q:

  • Lateral error weighting
  • Lateral error rate weighting
  • Heading error weighting
  • Heading error rate weighting

Tune the weighting parameters by following the basic lateral controller tuning steps listed above in Lateral Controller Tuning. An example is shown below.

lat_controller_conf {
  matrix_q: 0.05
  matrix_q: 0.0
  matrix_q: 1.0
  matrix_q: 0.0
}

Tune Additional Vehicle Types

When tuning a vehicle type that is other than a Lincoln MKZ, first update the vehicle-related physical parameters as shown in the example below. Then, follow the basic lateral controller tuning steps listed above in Lateral Controller Tuning and define the matrix Q parameters.

An example is shown below.

lat_controller_conf {
  cf: 155494.663
  cr: 155494.663
  wheelbase: 2.85
  mass_fl: 520
  mass_fr: 520
  mass_rl: 520
  mass_rr: 520
  eps: 0.01
  steer_transmission_ratio: 16
  steer_single_direction_max_degree: 470
}

Longitudinal Controller Tuning

The longitudinal controller is composed of Cascaded PID controllers that include one station controller and a high/low speed controller with different gains for different speeds. Apollo manages tuning in open loop and closed loop by:

  • OpenLoop: Calibration table generation. Please refer to how_to_update_vehicle_calibration.md for detailed steps.
  • Closeloop: Based on the order of High Speed Controller -> Low Speed Controller -> Station Controller.

High/Low Speed Controller Tuning

The high speed controller code is used mainly to track the desired speed above a certain speed value. For example:

high_speed_pid_conf {
  integrator_enable: true
  integrator_saturation_level: 0.3
  kp: 1.0
  ki: 0.3
  kd: 0.0
}
  1. First set the values for kp, ki, and kd to zero.
  2. Then start to increase kp to reduce the rising time of step response to velocity changes.
  3. Finally, increase ki to reduce velocity controller steady state error.

Once you obtain relatively accurate speed tracking performance for the higher speed, you can start tuning the low speed PID controller for a comfortable acceleration rate from the start point.

low_speed_pid_conf {
  integrator_enable: true
  integrator_saturation_level: 0.3
  kp: 0.5
  ki: 0.3
  kd: 0.0
}

Note: Apollo usually sets the switch speed to be a coasting speed when the gear switches to Drive.

Station Controller Tuning

Apollo uses the station controller for the vehicle to track the station error between the vehicle trajectory reference and the vehicle position. A station controller tuning example is shown below.

station_pid_conf {
  integrator_enable: true
  integrator_saturation_level: 0.3
  kp: 0.3
  ki: 0.0
  kd: 0.0
}

References

  1. "Vehicle dynamics and control." Rajamani, Rajesh. Springer Science & Business Media, 2011.

  2. "Optimal Trajectory generation for dynamic street scenarios in a Frenet Frame", M. Werling et., ICRA2010