phoneholderScrew.scad

/*
modeled after NGM Legend 2

*/
module phoneholderScrew(){
 phoneholder(127);//127
translate([0,0,2]){
 difference(){
 roundedBox([50,60,4],2,false);
translate([20,23,0]){
	cylinder(h = 5,r1=2,r2=2, center=true);
}
translate([-20,23,0]){
	cylinder(h = 5,r1=2,r2=2, center=true);
}
translate([20,-23,0]){
	cylinder(h = 5,r1=2,r2=2, center=true);
}
translate([-20,-23,0]){
	cylinder(h = 5,r1=2,r2=2, center=true);
}

}
}
}

module phoneholder(phoneHeight){
	difference(){
		union(){
		
		translate([0,0,6]){
			roundedBox([25,phoneHeight+10,12],3,false);
		}
		translate([0,(phoneHeight/2),30]){//65
			roundedBox([20,10,60],3,false);
		}
		translate([0,-(phoneHeight/2),30]){
			roundedBox([25,10,60],3,false);
		}
		translate([0,-(phoneHeight/2)+5,10]){
			roundedBox([30,20,20],3,false);
		}
		translate([0,(phoneHeight/2)-5,10]){
			roundedBox([30,20,20],3,false);
		}
		
		}
		
		
		translate([0,0,8]){
		phone(phoneHeight);
		}
	}

}

module phone(phoneHeight){
rotate([180,0,0]){
translate([0,0,-67]){
translate([0,0,34]) 
rotate([90,0,0])
cube([10,67,phoneHeight], center=true);
translate([-2,45,30]){
roundedBox([10,15,20],3,false);
}
translate([0,55,44]){
cube([8,54,38], center=true);
}
}
}
}

module roundedBox(size, radius, sidesonly)
{
	rot = [ [0,0,0], [90,0,90], [90,90,0] ];
	if (sidesonly) {
		cube(size - [2*radius,0,0], true);
		cube(size - [0,2*radius,0], true);
		for (x = [radius-size[0]/2, -radius+size[0]/2],
				 y = [radius-size[1]/2, -radius+size[1]/2]) {
			translate([x,y,0]) cylinder(r=radius, h=size[2], center=true);
		}
	}
	else {
		cube([size[0], size[1]-radius*2, size[2]-radius*2], center=true);
		cube([size[0]-radius*2, size[1], size[2]-radius*2], center=true);
		cube([size[0]-radius*2, size[1]-radius*2, size[2]], center=true);

		for (axis = [0:2]) {
			for (x = [radius-size[axis]/2, -radius+size[axis]/2],
					y = [radius-size[(axis+1)%3]/2, -radius+size[(axis+1)%3]/2]) {
				rotate(rot[axis]) 
					translate([x,y,0]) 
					cylinder(h=size[(axis+2)%3]-2*radius, r=radius, center=true);
			}
		}
		for (x = [radius-size[0]/2, -radius+size[0]/2],
				y = [radius-size[1]/2, -radius+size[1]/2],
				z = [radius-size[2]/2, -radius+size[2]/2]) {
			translate([x,y,z]) sphere(radius);
		}
	}
}
phoneholderScrew();