title	description
UnMarkDocs Flavored Markdown Spec	Specification covering every aspect about UnMarkDocs' Markdown flavour

This formal specification is based on the CommonMark Spec by John MacFarlane and licensed under

Introduction
Preliminaries
Blocks and inlines
- Precedence
- Container blocks and leaf blocks
Leaf blocks
Container blocks
Inlines
- Abbreviations (extension)
- Backslash escapes
- Code spans
- Emojis (extension)
- Emphasis and strong emphasis
- Strikethrough (extension)
- Links
- Link Generation (extension)
- Images
- OEmbed (extension)
- Autolinks
- Raw HTML
- Hard line breaks
- Soft line breaks
- Textual content

Introduction

What is UnMarkDocs Flavored Markdown?

UnMarkDocs Flavored Markdown, sometimes shortened as UFM, is the dialect of Markdown that is currently supported for content rendered on UnMarkDocs(https://unmarkdocs.co).

This formal specification, based on the CommonMark Spec, defines the syntax and semantics of this dialect.

UFM is a strict superset of CommonMark. All the features which are supported in UnMarkDocs and that are not specified on the original CommonMark Spec are hence known as extensions, and highlighted as such.

While UFM supports a wide range of inputs, it’s worth noting that UnMarkDocs may perform additional post-processing and sanitization after UFM is converted to HTML to ensure security and consistency of the website.

What is Markdown?

Markdown is a plain text format for writing structured documents, based on conventions for indicating formatting in email and usenet posts. It was developed by John Gruber (with help from Aaron Swartz) and released in 2004 in the form of a syntax description and a Perl script (Markdown.pl) for converting Markdown to HTML. In the next decade, dozens of implementations were developed in many languages. Some extended the original Markdown syntax with conventions for footnotes, tables, and other document elements. Some allowed Markdown documents to be rendered in formats other than HTML. Websites like Reddit, StackOverflow, and GitHub had millions of people using Markdown. And Markdown started to be used beyond the web, to author books, articles, slide shows, letters, and lecture notes.

What distinguishes Markdown from many other lightweight markup syntaxes, which are often easier to write, is its readability. As Gruber writes:

The overriding design goal for Markdown's formatting syntax is to make it as readable as possible. The idea is that a Markdown-formatted document should be publishable as-is, as plain text, without looking like it's been marked up with tags or formatting instructions. (http://daringfireball.net/projects/markdown/)

The point can be illustrated by comparing a sample of AsciiDoc with an equivalent sample of Markdown. Here is a sample of AsciiDoc from the AsciiDoc manual:

1. List item one.
+
List item one continued with a second paragraph followed by an
Indented block.
+
.................
$ ls *.sh
$ mv *.sh ~/tmp
.................
+
List item continued with a third paragraph.

2. List item two continued with an open block.
+
--
This paragraph is part of the preceding list item.

a. This list is nested and does not require explicit item
continuation.
+
This paragraph is part of the preceding list item.

b. List item b.

This paragraph belongs to item two of the outer list.
--

And here is the equivalent in Markdown:

1.  List item one.

    List item one continued with a second paragraph followed by an
    Indented block.

        $ ls *.sh
        $ mv *.sh ~/tmp

    List item continued with a third paragraph.

2.  List item two continued with an open block.

    This paragraph is part of the preceding list item.

    1. This list is nested and does not require explicit item continuation.

       This paragraph is part of the preceding list item.

    2. List item b.

    This paragraph belongs to item two of the outer list.

The AsciiDoc version is, arguably, easier to write. You don't need to worry about indentation. But the Markdown version is much easier to read. The nesting of list items is apparent to the eye in the source, not just in the processed document.

Why is a spec needed?

John Gruber's canonical description of Markdown's syntax does not specify the syntax unambiguously. Here are some examples of questions it does not answer:

How much indentation is needed for a sublist? The spec says that continuation paragraphs need to be indented four spaces, but is not fully explicit about sublists. It is natural to think that they, too, must be indented four spaces, but Markdown.pl does not require that. This is hardly a "corner case," and divergences between implementations on this issue often lead to surprises for users in real documents. (See this comment by John Gruber.)
Is a blank line needed before a block quote or heading? Most implementations do not require the blank line. However, this can lead to unexpected results in hard-wrapped text, and also to ambiguities in parsing (note that some implementations put the heading inside the blockquote, while others do not). (John Gruber has also spoken in favor of requiring the blank lines.)
Is a blank line needed before an indented code block? (Markdown.pl requires it, but this is not mentioned in the documentation, and some implementations do not require it.)
```
paragraph
    code?
```
What is the exact rule for determining when list items get wrapped in <p> tags? Can a list be partially "loose" and partially "tight"? What should we do with a list like this?
```
1. one

2. two
3. three
```
Or this?
```
1.  one
    - a

    - b
2.  two
```
(There are some relevant comments by John Gruber here.)
Can list markers be indented? Can ordered list markers be right-aligned?
```
 8. item 1
 9. item 2
10. item 2a
```
Is this one list with a thematic break in its second item, or two lists separated by a thematic break?
```
* a
* * * * *
* b
```
When list markers change from numbers to bullets, do we have two lists or one? (The Markdown syntax description suggests two, but the perl scripts and many other implementations produce one.)
```
1. fee
2. fie
-  foe
-  fum
```
What are the precedence rules for the markers of inline structure? For example, is the following a valid link, or does the code span take precedence ?
```
[a backtick (`)](/url) and [another backtick (`)](/url).
```
What are the precedence rules for markers of emphasis and strong emphasis? For example, how should the following be parsed?
```
*foo *bar* baz*
```
What are the precedence rules between block-level and inline-level structure? For example, how should the following be parsed?
```
- `a long code span can contain a hyphen like this
  - and it can screw things up`
```
Can list items include section headings? (Markdown.pl does not allow this, but does allow blockquotes to include headings.)
```
- # Heading
```
Can list items be empty?
```
* a
*
* b
```
Can link references be defined inside block quotes or list items?
```
> Blockquote [foo].
>
> [foo]: /url
```
If there are multiple definitions for the same reference, which takes precedence?
```
[foo]: /url1
[foo]: /url2

[foo][]
```

In the absence of a spec, early implementers consulted Markdown.pl to resolve these ambiguities. But Markdown.pl was quite buggy, and gave manifestly bad results in many cases, so it was not a satisfactory replacement for a spec.

Because there is no unambiguous spec, implementations have diverged considerably. As a result, users are often surprised to find that a document that renders one way on one system (say, a github wiki) renders differently on another (say, converting to docbook using pandoc). To make matters worse, because nothing in Markdown counts as a "syntax error," the divergence often isn't discovered right away.

About this document

This document attempts to specify Markdown syntax unambiguously. It contains many examples with side-by-side Markdown and HTML. These are intended to double as conformance tests. An accompanying script spec_tests.py can be used to run the tests against any Markdown program:

python test/spec_tests.py --spec spec.txt --program PROGRAM

Since this document describes how Markdown is to be parsed into an abstract syntax tree, it would have made sense to use an abstract representation of the syntax tree instead of HTML. But HTML is capable of representing the structural distinctions we need to make, and the choice of HTML for the tests makes it possible to run the tests against an implementation without writing an abstract syntax tree renderer.

This document is generated from a text file, spec.txt, written in Markdown with a small extension for the side-by-side tests. The script tools/makespec.py can be used to convert spec.txt into HTML or CommonMark (which can then be converted into other formats).

In the examples, the → character is used to represent tabs.

About the examples on this document

The HTML examples on this document may not exactly match the ones you'll get when using UnMarkDocs. This is because we apply some extra CSS classes, HTML properties... to prettify the output.

Preliminaries

Characters and lines

Any sequence of [characters] is a valid CommonMark document.

A character is a Unicode code point. Although some code points (for example, combining accents) do not correspond to characters in an intuitive sense, all code points count as characters for purposes of this spec.

This spec does not specify an encoding; it thinks of lines as composed of [characters] rather than bytes. A conforming parser may be limited to a certain encoding.

A line is a sequence of zero or more [characters] other than newline (U+000A) or carriage return (U+000D), followed by a [line ending] or by the end of file.

A line ending is a newline (U+000A), a carriage return (U+000D) not followed by a newline, or a carriage return and a following newline.

A line containing no characters, or a line containing only spaces (U+0020) or tabs (U+0009), is called a blank line.

The following definitions of character classes will be used in this spec:

A whitespace character is a space (U+0020), tab (U+0009), newline (U+000A), line tabulation (U+000B), form feed (U+000C), or carriage return (U+000D).

Whitespace is a sequence of one or more [whitespace characters].

A Unicode whitespace character is any code point in the Unicode Zs general category, or a tab (U+0009), carriage return (U+000D), newline (U+000A), or form feed (U+000C).

Unicode whitespace is a sequence of one or more [Unicode whitespace characters].

A space is U+0020.

A non-whitespace character is any character that is not a [whitespace character].

An ASCII punctuation character is !, ", #, $, %, &, ', (, ), *, +, ,, -, ., /, :, ;, <, =, >, ?, @, [, \, ], ^, _, `, {, |, }, or ~.

A punctuation character is an [ASCII punctuation character] or anything in the general Unicode categories Pc, Pd, Pe, Pf, Pi, Po, or Ps.

Tabs

Tabs in lines are not expanded to [spaces]. However, in contexts where whitespace helps to define block structure, tabs behave as if they were replaced by spaces with a tab stop of 4 characters.

Thus, for example, a tab can be used instead of four spaces in an indented code block. (Note, however, that internal tabs are passed through as literal tabs, not expanded to spaces.)

→foo→baz→→bim
.
<pre><code>foo→baz→→bim
</code></pre>

  →foo→baz→→bim
.
<pre><code>foo→baz→→bim
</code></pre>

    a→a
    ὐ→a
.
<pre><code>a→a
ὐ→a
</code></pre>

In the following example, a continuation paragraph of a list item is indented with a tab; this has exactly the same effect as indentation with four spaces would:

  - foo

→bar
.
<ul>
<li>
<p>foo</p>
<p>bar</p>
</li>
</ul>

- foo

→→bar
.
<ul>
<li>
<p>foo</p>
<pre><code>  bar
</code></pre>
</li>
</ul>

Normally the > that begins a block quote may be followed optionally by a space, which is not considered part of the content. In the following case > is followed by a tab, which is treated as if it were expanded into three spaces. Since one of these spaces is considered part of the delimiter, foo is considered to be indented six spaces inside the block quote context, so we get an indented code block starting with two spaces.

>→→foo
.
<blockquote>
<pre><code>  foo
</code></pre>
</blockquote>

-→→foo
.
<ul>
<li>
<pre><code>  foo
</code></pre>
</li>
</ul>

    foo
→bar
.
<pre><code>foo
bar
</code></pre>

 - foo
   - bar
→ - baz
.
<ul>
<li>foo
<ul>
<li>bar
<ul>
<li>baz</li>
</ul>
</li>
</ul>
</li>
</ul>

#→Foo
.
<h1>Foo</h1>

*→*→*→
.
<hr />

Insecure characters

For security reasons, the Unicode character U+0000 must be replaced with the REPLACEMENT CHARACTER (U+FFFD).

Blocks and inlines

We can think of a document as a sequence of blocks---structural elements like paragraphs, block quotations, lists, headings, rules, and code blocks. Some blocks (like block quotes and list items) contain other blocks; others (like headings and paragraphs) contain inline content---text, links, emphasized text, images, code spans, and so on.

Precedence

Indicators of block structure always take precedence over indicators of inline structure. So, for example, the following is a list with two items, not a list with one item containing a code span:

- `one
- two`
.
<ul>
<li>`one</li>
<li>two`</li>
</ul>

This means that parsing can proceed in two steps: first, the block structure of the document can be discerned; second, text lines inside paragraphs, headings, and other block constructs can be parsed for inline structure. The second step requires information about link reference definitions that will be available only at the end of the first step. Note that the first step requires processing lines in sequence, but the second can be parallelized, since the inline parsing of one block element does not affect the inline parsing of any other.

Container blocks and leaf blocks

We can divide blocks into two types: container blocks, which can contain other blocks, and leaf blocks, which cannot.

Leaf blocks

This section describes the different kinds of leaf block that make up a Markdown document.

Thematic breaks

A line consisting of 0-3 spaces of indentation, followed by a sequence of three or more matching -, _, or * characters, each followed optionally by any number of spaces, forms a thematic break.

***
---
___
.
<hr />
<hr />
<hr />

Wrong characters:

+++
.
<p>+++</p>

===
.
<p>===</p>

Not enough characters:

--
**
__
.
<p>--
**
__</p>

One to three spaces indent are allowed:

 ***
  ***
   ***
.
<hr />
<hr />
<hr />

Four spaces is too many:

    ***
.
<pre><code>***
</code></pre>

Foo
    ***
.
<p>Foo
***</p>

More than three characters may be used:

_____________________________________
.
<hr />

Spaces are allowed between the characters:

 - - -
.
<hr />

 **  * ** * ** * **
.
<hr />

-     -      -      -
.
<hr />

Spaces are allowed at the end:

- - - -    
.
<hr />

However, no other characters may occur in the line:

_ _ _ _ a

a------

---a---
.
<p>_ _ _ _ a</p>
<p>a------</p>
<p>---a---</p>

It is required that all of the [non-whitespace characters] be the same. So, this is not a thematic break:

 *-*
.
<p><em>-</em></p>

Thematic breaks do not need blank lines before or after:

- foo
***
- bar
.
<ul>
<li>foo</li>
</ul>
<hr />
<ul>
<li>bar</li>
</ul>

Thematic breaks can interrupt a paragraph:

Foo
***
bar
.
<p>Foo</p>
<hr />
<p>bar</p>

If a line of dashes that meets the above conditions for being a thematic break could also be interpreted as the underline of a [setext heading], the interpretation as a [setext heading] takes precedence. Thus, for example, this is a setext heading, not a paragraph followed by a thematic break:

Foo
---
bar
.
<h2>Foo</h2>
<p>bar</p>

When both a thematic break and a list item are possible interpretations of a line, the thematic break takes precedence:

* Foo
* * *
* Bar
.
<ul>
<li>Foo</li>
</ul>
<hr />
<ul>
<li>Bar</li>
</ul>

If you want a thematic break in a list item, use a different bullet:

- Foo
- * * *
.
<ul>
<li>Foo</li>
<li>
<hr />
</li>
</ul>

ATX headings

An ATX heading consists of a string of characters, parsed as inline content, between an opening sequence of 1--6 unescaped # characters and an optional closing sequence of any number of unescaped # characters. The opening sequence of # characters must be followed by a [space] or by the end of line. The optional closing sequence of #s must be preceded by a [space] and may be followed by spaces only. The opening # character may be indented 0-3 spaces. The raw contents of the heading are stripped of leading and trailing spaces before being parsed as inline content. The heading level is equal to the number of # characters in the opening sequence.

Simple headings:

# foo
## foo
### foo
#### foo
##### foo
###### foo
.
<h1>foo</h1>
<h2>foo</h2>
<h3>foo</h3>
<h4>foo</h4>
<h5>foo</h5>
<h6>foo</h6>

More than six # characters is not a heading:

####### foo
.
<p>####### foo</p>

At least one space is required between the # characters and the heading's contents, unless the heading is empty. Note that many implementations currently do not require the space. However, the space was required by the original ATX implementation, and it helps prevent things like the following from being parsed as headings:

#5 bolt

#hashtag
.
<p>#5 bolt</p>
<p>#hashtag</p>

This is not a heading, because the first # is escaped:

\## foo
.
<p>## foo</p>

Contents are parsed as inlines:

# foo *bar* \*baz\*
.
<h1>foo <em>bar</em> *baz*</h1>

Leading and trailing blanks are ignored in parsing inline content:

#                  foo                     
.
<h1>foo</h1>

One to three spaces indentation are allowed:

 ### foo
  ## foo
   # foo
.
<h3>foo</h3>
<h2>foo</h2>
<h1>foo</h1>

Four spaces are too much:

    # foo
.
<pre><code># foo
</code></pre>

foo
    # bar
.
<p>foo
# bar</p>

A closing sequence of # characters is optional:

## foo ##
  ###   bar    ###
.
<h2>foo</h2>
<h3>bar</h3>

It need not be the same length as the opening sequence:

# foo ##################################
##### foo ##
.
<h1>foo</h1>
<h5>foo</h5>

Spaces are allowed after the closing sequence:

### foo ###     
.
<h3>foo</h3>

A sequence of # characters with anything but [spaces] following it is not a closing sequence, but counts as part of the contents of the heading:

### foo ### b
.
<h3>foo ### b</h3>

The closing sequence must be preceded by a space:

# foo#
.
<h1>foo#</h1>

Backslash-escaped # characters do not count as part of the closing sequence:

### foo \###
## foo #\##
# foo \#
.
<h3>foo ###</h3>
<h2>foo ###</h2>
<h1>foo #</h1>

ATX headings need not be separated from surrounding content by blank lines, and they can interrupt paragraphs:

****
## foo
****
.
<hr />
<h2>foo</h2>
<hr />

Foo bar
# baz
Bar foo
.
<p>Foo bar</p>
<h1>baz</h1>
<p>Bar foo</p>

ATX headings can be empty:

## 
#
### ###
.
<h2></h2>
<h1></h1>
<h3></h3>

Setext headings

A setext heading consists of one or more lines of text, each containing at least one [non-whitespace character], with no more than 3 spaces indentation, followed by a [setext heading underline]. The lines of text must be such that, were they not followed by the setext heading underline, they would be interpreted as a paragraph: they cannot be interpretable as a [code fence], [ATX heading][ATX headings], [block quote][block quotes], [thematic break][thematic breaks], [list item][list items], or [HTML block][HTML blocks].

A setext heading underline is a sequence of = characters or a sequence of - characters, with no more than 3 spaces indentation and any number of trailing spaces. If a line containing a single - can be interpreted as an empty [list items], it should be interpreted this way and not as a [setext heading underline].

The heading is a level 1 heading if = characters are used in the [setext heading underline], and a level 2 heading if - characters are used. The contents of the heading are the result of parsing the preceding lines of text as CommonMark inline content.

In general, a setext heading need not be preceded or followed by a blank line. However, it cannot interrupt a paragraph, so when a setext heading comes after a paragraph, a blank line is needed between them.

Simple examples:

Foo *bar*
=========

Foo *bar*
---------
.
<h1>Foo <em>bar</em></h1>
<h2>Foo <em>bar</em></h2>

The content of the header may span more than one line:

Foo *bar
baz*
====
.
<h1>Foo <em>bar
baz</em></h1>

The underlining can be any length:

Foo
-------------------------

Foo
=
.
<h2>Foo</h2>
<h1>Foo</h1>

The heading content can be indented up to three spaces, and need not line up with the underlining:

   Foo
---

  Foo
-----

  Foo
  ===
.
<h2>Foo</h2>
<h2>Foo</h2>
<h1>Foo</h1>

Four spaces indent is too much:

    Foo
    ---

    Foo
---
.
<pre><code>Foo
---

Foo
</code></pre>
<hr />

The setext heading underline can be indented up to three spaces, and may have trailing spaces:

Foo
   ----      
.
<h2>Foo</h2>

Four spaces is too much:

Foo
    ---
.
<p>Foo
---</p>

The setext heading underline cannot contain internal spaces:

Foo
= =

Foo
--- -
.
<p>Foo
= =</p>
<p>Foo</p>
<hr />

Trailing spaces in the content line do not cause a line break:

Foo  
-----
.
<h2>Foo</h2>

Nor does a backslash at the end:

Foo\
----
.
<h2>Foo\</h2>

Since indicators of block structure take precedence over indicators of inline structure, the following are setext headings:

`Foo
----
`

<a title="a lot
---
of dashes"/>
.
<h2>`Foo</h2>
<p>`</p>
<h2>&lt;a title=&quot;a lot</h2>
<p>of dashes&quot;/&gt;</p>

The setext heading underline cannot be a [lazy continuation line] in a list item or block quote:

> Foo
---
.
<blockquote>
<p>Foo</p>
</blockquote>
<hr />

> foo
bar
===
.
<blockquote>
<p>foo
bar
===</p>
</blockquote>

- Foo
---
.
<ul>
<li>Foo</li>
</ul>
<hr />

A blank line is needed between a paragraph and a following setext heading, since otherwise the paragraph becomes part of the heading's content:

Foo
Bar
---
.
<h2>Foo
Bar</h2>

But in general a blank line is not required before or after setext headings:

---
Foo
---
Bar
---
Baz
.
<hr />
<h2>Foo</h2>
<h2>Bar</h2>
<p>Baz</p>

Setext headings cannot be empty:


====
.
<p>====</p>

Setext heading text lines must not be interpretable as block constructs other than paragraphs. So, the line of dashes in these examples gets interpreted as a thematic break:

---
---
.
<hr />
<hr />

- foo
-----
.
<ul>
<li>foo</li>
</ul>
<hr />

    foo
---
.
<pre><code>foo
</code></pre>
<hr />

> foo
-----
.
<blockquote>
<p>foo</p>
</blockquote>
<hr />

If you want a heading with > foo as its literal text, you can use backslash escapes:

\> foo
------
.
<h2>&gt; foo</h2>

Compatibility note: Most existing Markdown implementations do not allow the text of setext headings to span multiple lines. But there is no consensus about how to interpret

Foo
bar
---
baz

One can find four different interpretations:

paragraph "Foo", heading "bar", paragraph "baz"
paragraph "Foo bar", thematic break, paragraph "baz"
paragraph "Foo bar --- baz"
heading "Foo bar", paragraph "baz"

We find interpretation 4 most natural, and interpretation 4 increases the expressive power of CommonMark, by allowing multiline headings. Authors who want interpretation 1 can put a blank line after the first paragraph:

Foo

bar
---
baz
.
<p>Foo</p>
<h2>bar</h2>
<p>baz</p>

Authors who want interpretation 2 can put blank lines around the thematic break,

Foo
bar

---

baz
.
<p>Foo
bar</p>
<hr />
<p>baz</p>

or use a thematic break that cannot count as a [setext heading underline], such as

Foo
bar
* * *
baz
.
<p>Foo
bar</p>
<hr />
<p>baz</p>

Authors who want interpretation 3 can use backslash escapes:

Foo
bar
\---
baz
.
<p>Foo
bar
---
baz</p>

Indented code blocks

An indented code block is composed of one or more [indented chunks] separated by blank lines. An indented chunk is a sequence of non-blank lines, each indented four or more spaces. The contents of the code block are the literal contents of the lines, including trailing [line endings], minus four spaces of indentation. An indented code block has no [info string].

An indented code block cannot interrupt a paragraph, so there must be a blank line between a paragraph and a following indented code block. (A blank line is not needed, however, between a code block and a following paragraph.)

    a simple
      indented code block
.
<pre><code>a simple
  indented code block
</code></pre>

If there is any ambiguity between an interpretation of indentation as a code block and as indicating that material belongs to a [list item][list items], the list item interpretation takes precedence:

  - foo

    bar
.
<ul>
<li>
<p>foo</p>
<p>bar</p>
</li>
</ul>

1.  foo

    - bar
.
<ol>
<li>
<p>foo</p>
<ul>
<li>bar</li>
</ul>
</li>
</ol>

The contents of a code block are literal text, and do not get parsed as Markdown:

    <a/>
    *hi*

    - one
.
<pre><code>&lt;a/&gt;
*hi*

- one
</code></pre>

Here we have three chunks separated by blank lines:

    chunk1

    chunk2
  
 
 
    chunk3
.
<pre><code>chunk1

chunk2



chunk3
</code></pre>

Any initial spaces beyond four will be included in the content, even in interior blank lines:

    chunk1
      
      chunk2
.
<pre><code>chunk1
  
  chunk2
</code></pre>

An indented code block cannot interrupt a paragraph. (This allows hanging indents and the like.)

Foo
    bar

.
<p>Foo
bar</p>

However, any non-blank line with fewer than four leading spaces ends the code block immediately. So a paragraph may occur immediately after indented code:

    foo
bar
.
<pre><code>foo
</code></pre>
<p>bar</p>

And indented code can occur immediately before and after other kinds of blocks:

# Heading
    foo
Heading
------
    foo
----
.
<h1>Heading</h1>
<pre><code>foo
</code></pre>
<h2>Heading</h2>
<pre><code>foo
</code></pre>
<hr />

The first line can be indented more than four spaces:

        foo
    bar
.
<pre><code>    foo
bar
</code></pre>

Blank lines preceding or following an indented code block are not included in it:


    
    foo
    

.
<pre><code>foo
</code></pre>

Trailing spaces are included in the code block's content:

    foo  
.
<pre><code>foo  
</code></pre>

Fenced code blocks

A code fence is a sequence of at least three consecutive backtick characters (`) or tildes (~). (Tildes and backticks cannot be mixed.) A fenced code block begins with a code fence, indented no more than three spaces.

The line with the opening code fence may optionally contain some text following the code fence; this is trimmed of leading and trailing spaces and called the info string. The [info string] may not contain any backtick characters. (The reason for this restriction is that otherwise some inline code would be incorrectly interpreted as the beginning of a fenced code block.)

The content of the code block consists of all subsequent lines, until a closing [code fence] of the same type as the code block began with (backticks or tildes), and with at least as many backticks or tildes as the opening code fence. If the leading code fence is indented N spaces, then up to N spaces of indentation are removed from each line of the content (if present). (If a content line is not indented, it is preserved unchanged. If it is indented less than N spaces, all of the indentation is removed.)

The closing code fence may be indented up to three spaces, and may be followed only by spaces, which are ignored. If the end of the containing block (or document) is reached and no closing code fence has been found, the code block contains all of the lines after the opening code fence until the end of the containing block (or document). (An alternative spec would require backtracking in the event that a closing code fence is not found. But this makes parsing much less efficient, and there seems to be no real down side to the behavior described here.)

A fenced code block may interrupt a paragraph, and does not require a blank line either before or after.

The content of a code fence is treated as literal text, not parsed as inlines. The first word of the [info string] is typically used to specify the language of the code sample, and rendered in the class attribute of the code tag. However, this spec does not mandate any particular treatment of the [info string].

Here is a simple example with backticks:

```
<
 >
```
.
<pre><code>&lt;
 &gt;
</code></pre>

With tildes:

~~~
<
 >
~~~
.
<pre><code>&lt;
 &gt;
</code></pre>

Fewer than three backticks is not enough:

``
foo
``
.
<p><code>foo</code></p>

The closing code fence must use the same character as the opening fence:

```
aaa
~~~
```
.
<pre><code>aaa
~~~
</code></pre>

~~~
aaa
```
~~~
.
<pre><code>aaa
```
</code></pre>

The closing code fence must be at least as long as the opening fence:

````
aaa
```
``````
.
<pre><code>aaa
```
</code></pre>

~~~~
aaa
~~~
~~~~
.
<pre><code>aaa
~~~
</code></pre>

Unclosed code blocks are closed by the end of the document (or the enclosing [block quote][block quotes] or [list item][list items]):

```
.
<pre><code></code></pre>

`````

```
aaa
.
<pre><code>
```
aaa
</code></pre>

> ```
> aaa

bbb
.
<blockquote>
<pre><code>aaa
</code></pre>
</blockquote>
<p>bbb</p>

A code block can have all empty lines as its content:

```

  
```
.
<pre><code>
  
</code></pre>

A code block can be empty:

```
```
.
<pre><code></code></pre>

Fences can be indented. If the opening fence is indented, content lines will have equivalent opening indentation removed, if present:

 ```
 aaa
aaa
```
.
<pre><code>aaa
aaa
</code></pre>

  ```
aaa
  aaa
aaa
  ```
.
<pre><code>aaa
aaa
aaa
</code></pre>

   ```
   aaa
    aaa
  aaa
   ```
.
<pre><code>aaa
 aaa
aaa
</code></pre>

Four spaces indentation produces an indented code block:

    ```
    aaa
    ```
.
<pre><code>```
aaa
```
</code></pre>

Closing fences may be indented by 0-3 spaces, and their indentation need not match that of the opening fence:

```
aaa
  ```
.
<pre><code>aaa
</code></pre>

   ```
aaa
  ```
.
<pre><code>aaa
</code></pre>

This is not a closing fence, because it is indented 4 spaces:

```
aaa
    ```
.
<pre><code>aaa
    ```
</code></pre>

Code fences (opening and closing) cannot contain internal spaces:

``` ```
aaa
.
<p><code></code>
aaa</p>

~~~~~~
aaa
~~~ ~~
.
<pre><code>aaa
~~~ ~~
</code></pre>

Fenced code blocks can interrupt paragraphs, and can be followed directly by paragraphs, without a blank line between:

foo
```
bar
```
baz
.
<p>foo</p>
<pre><code>bar
</code></pre>
<p>baz</p>

Other blocks can also occur before and after fenced code blocks without an intervening blank line:

foo
---
~~~
bar
~~~
# baz
.
<h2>foo</h2>
<pre><code>bar
</code></pre>
<h1>baz</h1>

An [info string] can be provided after the opening code fence. Opening and closing spaces will be stripped, and the first word, prefixed with language-, is used as the value for the class attribute of the code element within the enclosing pre element.

```ruby
def foo(x)
  return 3
end
```
.
<pre><code class="language-ruby">def foo(x)
  return 3
end
</code></pre>

~~~~    ruby startline=3 $%@#$
def foo(x)
  return 3
end
~~~~~~~
.
<pre><code class="language-ruby">def foo(x)
  return 3
end
</code></pre>

````;
````
.
<pre><code class="language-;"></code></pre>

[Info strings] for backtick code blocks cannot contain backticks:

``` aa ```
foo
.
<p><code>aa</code>
foo</p>

Closing code fences cannot have [info strings]:

```
``` aaa
```
.
<pre><code>``` aaa
</code></pre>

HTML blocks

An HTML block is a group of lines that is treated as raw HTML (and will not be escaped in HTML output).

There are seven kinds of [HTML block], which can be defined by their start and end conditions. The block begins with a line that meets a start condition (after up to three spaces optional indentation). It ends with the first subsequent line that meets a matching end condition, or the last line of the document or other [container block]), if no line is encountered that meets the [end condition]. If the first line meets both the [start condition] and the [end condition], the block will contain just that line.

Start condition: line begins with the string <script, <pre, or <style (case-insensitive), followed by whitespace, the string >, or the end of the line.
End condition: line contains an end tag </script>, </pre>, or </style> (case-insensitive; it need not match the start tag).
Start condition: line begins with the string .
Start condition: line begins with the string <?.
End condition: line contains the string ?>.
Start condition: line begins with the string <! followed by an uppercase ASCII letter.
End condition: line contains the character >.
Start condition: line begins with the string <![CDATA[.
End condition: line contains the string ]]>.
Start condition: line begins the string < or </ followed by one of the strings (case-insensitive) address, article, aside, base, basefont, blockquote, body, caption, center, col, colgroup, dd, details, dialog, dir, div, dl, dt, fieldset, figcaption, figure, footer, form, frame, frameset, h1, h2, h3, h4, h5, h6, head, header, hr, html, iframe, legend, li, link, main, menu, menuitem, meta, nav, noframes, ol, optgroup, option, p, param, section, source, summary, table, tbody, td, tfoot, th, thead, title, tr, track, ul, followed by [whitespace], the end of the line, the string >, or the string />.
End condition: line is followed by a [blank line].
Start condition: line begins with a complete [open tag] or [closing tag] (with any [tag name] other than script, style, or pre) followed only by [whitespace] or the end of the line.
End condition: line is followed by a [blank line].

HTML blocks continue until they are closed by their appropriate [end condition], or the last line of the document or other [container block]. This means any HTML within an HTML block that might otherwise be recognised as a start condition will be ignored by the parser and passed through as-is, without changing the parser's state.

For instance, <pre> within a HTML block started by <table> will not affect the parser state; as the HTML block was started in by start condition 6, it will end at any blank line. This can be surprising:

<table><tr><td>
<pre>
**Hello**,

_world_.
</pre>
</td></tr></table>
.
<table><tr><td>
<pre>
**Hello**,
<p><em>world</em>.
</pre></p>
</td></tr></table>

In this case, the HTML block is terminated by the newline — the **hello** text remains verbatim — and regular parsing resumes, with a paragraph, emphasised world and inline and block HTML following.

All types of [HTML blocks] except type 7 may interrupt a paragraph. Blocks of type 7 may not interrupt a paragraph. (This restriction is intended to prevent unwanted interpretation of long tags inside a wrapped paragraph as starting HTML blocks.)

Some simple examples follow. Here are some basic HTML blocks of type 6:

<table>
  <tr>
    <td>
           hi
    </td>
  </tr>
</table>

okay.
.
<table>
  <tr>
    <td>
           hi
    </td>
  </tr>
</table>
<p>okay.</p>

 <div>
  *hello*
         <foo><a>
.
 <div>
  *hello*
         <foo><a>

A block can also start with a closing tag:

</div>
*foo*
.
</div>
*foo*

Here we have two HTML blocks with a Markdown paragraph between them:

<DIV CLASS="foo">

*Markdown*

</DIV>
.
<DIV CLASS="foo">
<p><em>Markdown</em></p>
</DIV>

The tag on the first line can be partial, as long as it is split where there would be whitespace:

<div id="foo"
  class="bar">
</div>
.
<div id="foo"
  class="bar">
</div>

<div id="foo" class="bar
  baz">
</div>
.
<div id="foo" class="bar
  baz">
</div>

An open tag need not be closed:

<div>
*foo*

*bar*
.
<div>
*foo*
<p><em>bar</em></p>

A partial tag need not even be completed (garbage in, garbage out):

<div id="foo"
*hi*
.
<div id="foo"
*hi*

<div class
foo
.
<div class
foo

The initial tag doesn't even need to be a valid tag, as long as it starts like one:

<div *???-&&&-<---
*foo*
.
<div *???-&&&-<---
*foo*

In type 6 blocks, the initial tag need not be on a line by itself:

<div><a href="bar">*foo*</a></div>
.
<div><a href="bar">*foo*</a></div>

<table><tr><td>
foo
</td></tr></table>
.
<table><tr><td>
foo
</td></tr></table>

Everything until the next blank line or end of document gets included in the HTML block. So, in the following example, what looks like a Markdown code block is actually part of the HTML block, which continues until a blank line or the end of the document is reached:

<div></div>
``` c
int x = 33;
```
.
<div></div>
``` c
int x = 33;
```

To start an [HTML block] with a tag that is not in the list of block-level tags in (6), you must put the tag by itself on the first line (and it must be complete):

<a href="foo">
*bar*
</a>
.
<a href="foo">
*bar*
</a>

In type 7 blocks, the [tag name] can be anything:

<Warning>
*bar*
</Warning>
.
<Warning>
*bar*
</Warning>

<i class="foo">
*bar*
</i>
.
<i class="foo">
*bar*
</i>

</ins>
*bar*
.
</ins>
*bar*

These rules are designed to allow us to work with tags that can function as either block-level or inline-level tags. The <del> tag is a nice example. We can surround content with <del> tags in three different ways. In this case, we get a raw HTML block, because the <del> tag is on a line by itself:

<del>
*foo*
</del>
.
<del>
*foo*
</del>

In this case, we get a raw HTML block that just includes the <del> tag (because it ends with the following blank line). So the contents get interpreted as CommonMark:

<del>

*foo*

</del>
.
<del>
<p><em>foo</em></p>
</del>

Finally, in this case, the <del> tags are interpreted as [raw HTML] inside the CommonMark paragraph. (Because the tag is not on a line by itself, we get inline HTML rather than an [HTML block].)

<del>*foo*</del>
.
<p><del><em>foo</em></del></p>

HTML tags designed to contain literal content (script, style, pre), comments, processing instructions, and declarations are treated somewhat differently. Instead of ending at the first blank line, these blocks end at the first line containing a corresponding end tag. As a result, these blocks can contain blank lines:

A pre tag (type 1):

<pre language="haskell"><code>
import Text.HTML.TagSoup

main :: IO ()
main = print $ parseTags tags
</code></pre>
okay
.
<pre language="haskell"><code>
import Text.HTML.TagSoup

main :: IO ()
main = print $ parseTags tags
</code></pre>
<p>okay</p>

A script tag (type 1):

<script type="text/javascript">
// JavaScript example

document.getElementById("demo").innerHTML = "Hello JavaScript!";
</script>
okay
.
<script type="text/javascript">
// JavaScript example

document.getElementById("demo").innerHTML = "Hello JavaScript!";
</script>
<p>okay</p>

A style tag (type 1):

<style
  type="text/css">
h1 {color:red;}

p {color:blue;}
</style>
okay
.
<style
  type="text/css">
h1 {color:red;}

p {color:blue;}
</style>
<p>okay</p>

If there is no matching end tag, the block will end at the end of the document (or the enclosing [block quote][block quotes] or [list item][list items]):

<style
  type="text/css">

foo
.
<style
  type="text/css">

foo

> <div>
> foo

bar
.
<blockquote>
<div>
foo
</blockquote>
<p>bar</p>

- <div>
- foo
.
<ul>
<li>
<div>
</li>
<li>foo</li>
</ul>

The end tag can occur on the same line as the start tag:

<style>p{color:red;}</style>
*foo*
.
<style>p{color:red;}</style>
<p><em>foo</em></p>

<!-- foo -->*bar*
*baz*
.
<!-- foo -->*bar*
<p><em>baz</em></p>

Note that anything on the last line after the end tag will be included in the [HTML block]:

<script>
foo
</script>1. *bar*
.
<script>
foo
</script>1. *bar*

A comment (type 2):

<!-- Foo

bar
   baz -->
okay
.
<!-- Foo

bar
   baz -->
<p>okay</p>

A processing instruction (type 3):

<?php

  echo '>';

?>
okay
.
<?php

  echo '>';

?>
<p>okay</p>

A declaration (type 4):

<!DOCTYPE html>
.
<!DOCTYPE html>

CDATA (type 5):

<![CDATA[
function matchwo(a,b)
{
  if (a < b && a < 0) then {
    return 1;

  } else {

    return 0;
  }
}
]]>
okay
.
<![CDATA[
function matchwo(a,b)
{
  if (a < b && a < 0) then {
    return 1;

  } else {

    return 0;
  }
}
]]>
<p>okay</p>

The opening tag can be indented 1-3 spaces, but not 4:

  <!-- foo -->

    <!-- foo -->
.
  <!-- foo -->
<pre><code>&lt;!-- foo --&gt;
</code></pre>

  <div>

    <div>
.
  <div>
<pre><code>&lt;div&gt;
</code></pre>

An HTML block of types 1--6 can interrupt a paragraph, and need not be preceded by a blank line.

Foo
<div>
bar
</div>
.
<p>Foo</p>
<div>
bar
</div>

However, a following blank line is needed, except at the end of a document, and except for blocks of types 1--5, above:

<div>
bar
</div>
*foo*
.
<div>
bar
</div>
*foo*

HTML blocks of type 7 cannot interrupt a paragraph:

Foo
<a href="bar">
baz
.
<p>Foo
<a href="bar">
baz</p>

This rule differs from John Gruber's original Markdown syntax specification, which says:

The only restrictions are that block-level HTML elements — e.g. <div>, <table>, <pre>, <p>, etc. — must be separated from surrounding content by blank lines, and the start and end tags of the block should not be indented with tabs or spaces.

In some ways Gruber's rule is more restrictive than the one given here:

It requires that an HTML block be preceded by a blank line.
It does not allow the start tag to be indented.
It requires a matching end tag, which it also does not allow to be indented.

Most Markdown implementations (including some of Gruber's own) do not respect all of these restrictions.

There is one respect, however, in which Gruber's rule is more liberal than the one given here, since it allows blank lines to occur inside an HTML block. There are two reasons for disallowing them here. First, it removes the need to parse balanced tags, which is expensive and can require backtracking from the end of the document if no matching end tag is found. Second, it provides a very simple and flexible way of including Markdown content inside HTML tags: simply separate the Markdown from the HTML using blank lines:

Compare:

<div>

*Emphasized* text.

</div>
.
<div>
<p><em>Emphasized</em> text.</p>
</div>

<div>
*Emphasized* text.
</div>
.
<div>
*Emphasized* text.
</div>

Some Markdown implementations have adopted a convention of interpreting content inside tags as text if the open tag has the attribute markdown=1. The rule given above seems a simpler and more elegant way of achieving the same expressive power, which is also much simpler to parse.

The main potential drawback is that one can no longer paste HTML blocks into Markdown documents with 100% reliability. However, in most cases this will work fine, because the blank lines in HTML are usually followed by HTML block tags. For example:

<table>

<tr>

<td>
Hi
</td>

</tr>

</table>
.
<table>
<tr>
<td>
Hi
</td>
</tr>
</table>

There are problems, however, if the inner tags are indented and separated by spaces, as then they will be interpreted as an indented code block:

<table>

  <tr>

    <td>
      Hi
    </td>

  </tr>

</table>
.
<table>
  <tr>
<pre><code>&lt;td&gt;
  Hi
&lt;/td&gt;
</code></pre>
  </tr>
</table>

Fortunately, blank lines are usually not necessary and can be deleted. The exception is inside <pre> tags, but as described above, raw HTML blocks starting with <pre> can contain blank lines.

Link reference definitions

A link reference definition consists of a [link label], indented up to three spaces, followed by a colon (:), optional [whitespace] (including up to one [line ending]), a [link destination], optional [whitespace] (including up to one [line ending]), and an optional [link title], which if it is present must be separated from the [link destination] by [whitespace]. No further [non-whitespace characters] may occur on the line.

A [link reference definition] does not correspond to a structural element of a document. Instead, it defines a label which can be used in [reference links] and reference-style [images] elsewhere in the document. [Link reference definitions] can come either before or after the links that use them.

[foo]: /url "title"

[foo]
.
<p><a href="/url" title="title">foo</a></p>

   [foo]: 
      /url  
           'the title'  

[foo]
.
<p><a href="/url" title="the title">foo</a></p>

[Foo*bar\]]:my_(url) 'title (with parens)'

[Foo*bar\]]
.
<p><a href="my_(url)" title="title (with parens)">Foo*bar]</a></p>

[Foo bar]:
<my%20url>
'title'

[Foo bar]
.
<p><a href="my%20url" title="title">Foo bar</a></p>

The title may extend over multiple lines:

[foo]: /url '
title
line1
line2
'

[foo]
.
<p><a href="/url" title="
title
line1
line2
">foo</a></p>

However, it may not contain a [blank line]:

[foo]: /url 'title

with blank line'

[foo]
.
<p>[foo]: /url 'title</p>
<p>with blank line'</p>
<p>[foo]</p>

The title may be omitted:

[foo]:
/url

[foo]
.
<p><a href="/url">foo</a></p>

The link destination may not be omitted:

[foo]:

[foo]
.
<p>[foo]:</p>
<p>[foo]</p>

Both title and destination can contain backslash escapes and literal backslashes:

[foo]: /url\bar\*baz "foo\"bar\baz"

[foo]
.
<p><a href="/url%5Cbar*baz" title="foo&quot;bar\baz">foo</a></p>

A link can come before its corresponding definition:

[foo]

[foo]: url
.
<p><a href="url">foo</a></p>

If there are several matching definitions, the first one takes precedence:

[foo]

[foo]: first
[foo]: second
.
<p><a href="first">foo</a></p>

As noted in the section on [Links], matching of labels is case-insensitive (see [matches]).

[FOO]: /url

[Foo]
.
<p><a href="/url">Foo</a></p>

[ΑΓΩ]: /φου

[αγω]
.
<p><a href="/%CF%86%CE%BF%CF%85">αγω</a></p>

Here is a link reference definition with no corresponding link. It contributes nothing to the document.

[foo]: /url
.

Here is another one:

[
foo
]: /url
bar
.
<p>bar</p>

This is not a link reference definition, because there are [non-whitespace characters] after the title:

[foo]: /url "title" ok
.
<p>[foo]: /url &quot;title&quot; ok</p>

This is a link reference definition, but it has no title:

[foo]: /url
"title" ok
.
<p>&quot;title&quot; ok</p>

This is not a link reference definition, because it is indented four spaces:

    [foo]: /url "title"

[foo]
.
<pre><code>[foo]: /url &quot;title&quot;
</code></pre>
<p>[foo]</p>

This is not a link reference definition, because it occurs inside a code block:

```
[foo]: /url
```

[foo]
.
<pre><code>[foo]: /url
</code></pre>
<p>[foo]</p>

A [link reference definition] cannot interrupt a paragraph.

Foo
[bar]: /baz

[bar]
.
<p>Foo
[bar]: /baz</p>
<p>[bar]</p>

However, it can directly follow other block elements, such as headings and thematic breaks, and it need not be followed by a blank line.

# [Foo]
[foo]: /url
> bar
.
<h1><a href="/url">Foo</a></h1>
<blockquote>
<p>bar</p>
</blockquote>

Several [link reference definitions] can occur one after another, without intervening blank lines.

[foo]: /foo-url "foo"
[bar]: /bar-url
  "bar"
[baz]: /baz-url

[foo],
[bar],
[baz]
.
<p><a href="/foo-url" title="foo">foo</a>,
<a href="/bar-url" title="bar">bar</a>,
<a href="/baz-url">baz</a></p>

[Link reference definitions] can occur inside block containers, like lists and block quotations. They affect the entire document, not just the container in which they are defined:

[foo]

> [foo]: /url
.
<p><a href="/url">foo</a></p>
<blockquote>
</blockquote>

Paragraphs

A sequence of non-blank lines that cannot be interpreted as other kinds of blocks forms a paragraph. The contents of the paragraph are the result of parsing the paragraph's raw content as inlines. The paragraph's raw content is formed by concatenating the lines and removing initial and final [whitespace].

A simple example with two paragraphs:

aaa

bbb
.
<p>aaa</p>
<p>bbb</p>

Paragraphs can contain multiple lines, but no blank lines:

aaa
bbb

ccc
ddd
.
<p>aaa
bbb</p>
<p>ccc
ddd</p>

Multiple blank lines between paragraph have no effect:

aaa


bbb
.
<p>aaa</p>
<p>bbb</p>

Leading spaces are skipped:

  aaa
 bbb
.
<p>aaa
bbb</p>

Lines after the first may be indented any amount, since indented code blocks cannot interrupt paragraphs.

aaa
             bbb
                                       ccc
.
<p>aaa
bbb
ccc</p>

However, the first line may be indented at most three spaces, or an indented code block will be triggered:

   aaa
bbb
.
<p>aaa
bbb</p>

    aaa
bbb
.
<pre><code>aaa
</code></pre>
<p>bbb</p>

Final spaces are stripped before inline parsing, so a paragraph that ends with two or more spaces will not end with a [hard line break]:

aaa     
bbb     
.
<p>aaa<br />
bbb</p>

Blank lines

[Blank lines] between block-level elements are ignored, except for the role they play in determining whether a [list] is [tight] or [loose].

Blank lines at the beginning and end of the document are also ignored.

  

aaa
  

# aaa

  
.
<p>aaa</p>
<h1>aaa</h1>

Tables (extension)

UFM enables the table extension, where an additional leaf block type is available.

A table is an arrangement of data with rows and columns, consisting of a single header row, a delimiter row separating the header from the data, and zero or more data rows.

Each row consists of cells containing arbitrary text, in which inlines are parsed, separated by pipes (|). A leading and trailing pipe is also recommended for clarity of reading, and if there’s otherwise parsing ambiguity. Spaces between pipes and cell content are trimmed. Block-level elements cannot be inserted in a table.

The delimiter row consists of cells whose only content are hyphens (-), and optionally, a leading or trailing colon (:), or both, to indicate left, right, or center alignment respectively.

| foo | bar |
| --- | --- |
| baz | bim |
 
<table>
<thead>
<tr>
<th>foo</th>
<th>bar</th>
</tr>
</thead>
<tbody>
<tr>
<td>baz</td>
<td>bim</td>
</tr></tbody></table>

Cells in one column don’t need to match length, though it’s easier to read if they are. Likewise, use of leading and trailing pipes may be inconsistent:

| abc | defghi |
:-: | -----------:
bar | baz
 
<table>
<thead>
<tr>
<th align="center">abc</th>
<th align="right">defghi</th>
</tr>
</thead>
<tbody>
<tr>
<td align="center">bar</td>
<td align="right">baz</td>
</tr></tbody></table>

Include a pipe in a cell’s content by escaping it, including inside other inline spans:

| f\|oo  |
| ------ |
| b `\|` az |
| b **\|** im |
 
<table>
<thead>
<tr>
<th>f|oo</th>
</tr>
</thead>
<tbody>
<tr>
<td>b <code>|</code> az</td>
</tr>
<tr>
<td>b <strong>|</strong> im</td>
</tr></tbody></table>

The table is broken at the first empty line, or beginning of another block-level structure:

| abc | def |
| --- | --- |
| bar | baz |
> bar
 
<table>
<thead>
<tr>
<th>abc</th>
<th>def</th>
</tr>
</thead>
<tbody>
<tr>
<td>bar</td>
<td>baz</td>
</tr></tbody></table>
<blockquote>
<p>bar</p>
</blockquote>

| abc | def |
| --- | --- |
| bar | baz |
bar

bar
 
<table>
<thead>
<tr>
<th>abc</th>
<th>def</th>
</tr>
</thead>
<tbody>
<tr>
<td>bar</td>
<td>baz</td>
</tr>
<tr>
<td>bar</td>
<td></td>
</tr></tbody></table>
<p>bar</p>

The header row must match the delimiter row in the number of cells. If not, a table will not be recognized:

| abc | def |
| --- |
| bar |
 
<p>| abc | def |
| --- |
| bar |</p>

The remainder of the table’s rows may vary in the number of cells. If there are a number of cells fewer than the number of cells in the header row, empty cells are inserted. If there are greater, the excess is ignored:

| abc | def |
| --- | --- |
| bar |
| bar | baz | boo |
 
<table>
<thead>
<tr>
<th>abc</th>
<th>def</th>
</tr>
</thead>
<tbody>
<tr>
<td>bar</td>
<td></td>
</tr>
<tr>
<td>bar</td>
<td>baz</td>
</tr></tbody></table>

Alerts (extension)

UFM adds a new type of block, that can be used to show warnings, success messages, tips...

The alert syntax is as follows:

Three [exclamation marks] (!).
A [space] and the alert type (one of success, note, info, panel, danger).
A line break.
An (optional) [number sign] (#), followed by an space and the alert title, followed by a line break.
The alert body, that can contain any ASCII text, and cannot start with a [number sign] (#).
A line break.
Three [exclamation marks] (!).

Here is an example:

!!! success
# Something went really well
Something you did went really well.
Congratulations!
!!!

<div><h4>Something went really well</h4><p>Something you did went really well.<br>Congratulations!</p></div>

Here is another example without a title:

!!! warning
You should retry that again...
!!!

<div><p>You should retry that again...</div>

Container blocks

A [container block] is a block that has other blocks as its contents. There are two basic kinds of container blocks: [block quotes] and [list items]. [Lists] are meta-containers for [list items].

We define the syntax for container blocks recursively. The general form of the definition is:

If X is a sequence of blocks, then the result of transforming X in such-and-such a way is a container of type Y with these blocks as its content.

So, we explain what counts as a block quote or list item by explaining how these can be generated from their contents. This should suffice to define the syntax, although it does not give a recipe for parsing these constructions. (A recipe is provided below in the section entitled A parsing strategy.)

Block quotes

A block quote marker consists of 0-3 spaces of initial indent, plus (a) the character > together with a following space, or (b) a single character > not followed by a space.

The following rules define [block quotes]:

Basic case. If a string of lines Ls constitute a sequence of blocks Bs, then the result of prepending a [block quote marker] to the beginning of each line in Ls is a block quote containing Bs.
Laziness. If a string of lines Ls constitute a block quote with contents Bs, then the result of deleting the initial [block quote marker] from one or more lines in which the next [non-whitespace character] after the [block quote marker] is [paragraph continuation text] is a block quote with Bs as its content. Paragraph continuation text is text that will be parsed as part of the content of a paragraph, but does not occur at the beginning of the paragraph.
Consecutiveness. A document cannot contain two [block quotes] in a row unless there is a [blank line] between them.

Nothing else counts as a block quote.

Here is a simple example:

> # Foo
> bar
> baz
.
<blockquote>
<h1>Foo</h1>
<p>bar
baz</p>
</blockquote>

The spaces after the > characters can be omitted:

># Foo
>bar
> baz
.
<blockquote>
<h1>Foo</h1>
<p>bar
baz</p>
</blockquote>

The > characters can be indented 1-3 spaces:

   > # Foo
   > bar
 > baz
.
<blockquote>
<h1>Foo</h1>
<p>bar
baz</p>
</blockquote>

Four spaces gives us a code block:

    > # Foo
    > bar
    > baz
.
<pre><code>&gt; # Foo
&gt; bar
&gt; baz
</code></pre>

The Laziness clause allows us to omit the > before [paragraph continuation text]:

> # Foo
> bar
baz
.
<blockquote>
<h1>Foo</h1>
<p>bar
baz</p>
</blockquote>

A block quote can contain some lazy and some non-lazy continuation lines:

> bar
baz
> foo
.
<blockquote>
<p>bar
baz
foo</p>
</blockquote>

Laziness only applies to lines that would have been continuations of paragraphs had they been prepended with [block quote markers]. For example, the > cannot be omitted in the second line of

> foo
> ---

without changing the meaning:

> foo
---
.
<blockquote>
<p>foo</p>
</blockquote>
<hr />

Similarly, if we omit the > in the second line of

> - foo
> - bar

then the block quote ends after the first line:

> - foo
- bar
.
<blockquote>
<ul>
<li>foo</li>
</ul>
</blockquote>
<ul>
<li>bar</li>
</ul>

For the same reason, we can't omit the > in front of subsequent lines of an indented or fenced code block:

>     foo
    bar
.
<blockquote>
<pre><code>foo
</code></pre>
</blockquote>
<pre><code>bar
</code></pre>

> ```
foo
```
.
<blockquote>
<pre><code></code></pre>
</blockquote>
<p>foo</p>
<pre><code></code></pre>

Note that in the following case, we have a [lazy continuation line]:

> foo
    - bar
.
<blockquote>
<p>foo
- bar</p>
</blockquote>

To see why, note that in

> foo
>     - bar

the - bar is indented too far to start a list, and can't be an indented code block because indented code blocks cannot interrupt paragraphs, so it is [paragraph continuation text].

A block quote can be empty:

>
.
<blockquote>
</blockquote>

>
>  
> 
.
<blockquote>
</blockquote>

A block quote can have initial or final blank lines:

>
> foo
>  
.
<blockquote>
<p>foo</p>
</blockquote>

A blank line always separates block quotes:

> foo

> bar
.
<blockquote>
<p>foo</p>
</blockquote>
<blockquote>
<p>bar</p>
</blockquote>

(Most current Markdown implementations, including John Gruber's original Markdown.pl, will parse this example as a single block quote with two paragraphs. But it seems better to allow the author to decide whether two block quotes or one are wanted.)

Consecutiveness means that if we put these block quotes together, we get a single block quote:

> foo
> bar
.
<blockquote>
<p>foo
bar</p>
</blockquote>

To get a block quote with two paragraphs, use:

> foo
>
> bar
.
<blockquote>
<p>foo</p>
<p>bar</p>
</blockquote>

Block quotes can interrupt paragraphs:

foo
> bar
.
<p>foo</p>
<blockquote>
<p>bar</p>
</blockquote>

In general, blank lines are not needed before or after block quotes:

> aaa
***
> bbb
.
<blockquote>
<p>aaa</p>
</blockquote>
<hr />
<blockquote>
<p>bbb</p>
</blockquote>

However, because of laziness, a blank line is needed between a block quote and a following paragraph:

> bar
baz
.
<blockquote>
<p>bar
baz</p>
</blockquote>

> bar

baz
.
<blockquote>
<p>bar</p>
</blockquote>
<p>baz</p>

> bar
>
baz
.
<blockquote>
<p>bar</p>
</blockquote>
<p>baz</p>

It is a consequence of the Laziness rule that any number of initial >s may be omitted on a continuation line of a nested block quote:

> > > foo
bar
.
<blockquote>
<blockquote>
<blockquote>
<p>foo
bar</p>
</blockquote>
</blockquote>
</blockquote>

>>> foo
> bar
>>baz
.
<blockquote>
<blockquote>
<blockquote>
<p>foo
bar
baz</p>
</blockquote>
</blockquote>
</blockquote>

When including an indented code block in a block quote, remember that the [block quote marker] includes both the > and a following space. So five spaces are needed after the >:

>     code

>    not code
.
<blockquote>
<pre><code>code
</code></pre>
</blockquote>
<blockquote>
<p>not code</p>
</blockquote>

List items

A list marker is a [bullet list marker] or an [ordered list marker].

A bullet list marker is a -, +, or * character.

An ordered list marker is a sequence of 1--9 arabic digits (0-9), followed by either a . character or a ) character. (The reason for the length limit is that with 10 digits we start seeing integer overflows in some browsers.)

The following rules define [list items]:

Basic case. If a sequence of lines Ls constitute a sequence of blocks Bs starting with a [non-whitespace character] and not separated from each other by more than one blank line, and M is a list marker of width W followed by 1 ≤ N ≤ 4 spaces, then the result of prepending M and the following spaces to the first line of Ls, and indenting subsequent lines of Ls by W + N spaces, is a list item with Bs as its contents. The type of the list item (bullet or ordered) is determined by the type of its list marker. If the list item is ordered, then it is also assigned a start number, based on the ordered list marker.

Exceptions:
1. When the first list item in a [list] interrupts a paragraph---that is, when it starts on a line that would otherwise count as [paragraph continuation text]---then (a) the lines Ls must not begin with a blank line, and (b) if the list item is ordered, the start number must be 1.
2. If any line is a [thematic break][thematic breaks] then that line is not a list item.

For example, let Ls be the lines

A paragraph
with two lines.

    indented code

> A block quote.
.
<p>A paragraph
with two lines.</p>
<pre><code>indented code
</code></pre>
<blockquote>
<p>A block quote.</p>
</blockquote>

And let M be the marker 1., and N = 2. Then rule #1 says that the following is an ordered list item with start number 1, and the same contents as Ls:

1.  A paragraph
    with two lines.

        indented code

    > A block quote.
.
<ol>
<li>
<p>A paragraph
with two lines.</p>
<pre><code>indented code
</code></pre>
<blockquote>
<p>A block quote.</p>
</blockquote>
</li>
</ol>

The most important thing to notice is that the position of the text after the list marker determines how much indentation is needed in subsequent blocks in the list item. If the list marker takes up two spaces, and there are three spaces between the list marker and the next [non-whitespace character], then blocks must be indented five spaces in order to fall under the list item.

Here are some examples showing how far content must be indented to be put under the list item:

- one

 two
.
<ul>
<li>one</li>
</ul>
<p>two</p>

- one

  two
.
<ul>
<li>
<p>one</p>
<p>two</p>
</li>
</ul>

 -    one

     two
.
<ul>
<li>one</li>
</ul>
<pre><code> two
</code></pre>

 -    one

      two
.
<ul>
<li>
<p>one</p>
<p>two</p>
</li>
</ul>

It is tempting to think of this in terms of columns: the continuation blocks must be indented at least to the column of the first [non-whitespace character] after the list marker. However, that is not quite right. The spaces after the list marker determine how much relative indentation is needed. Which column this indentation reaches will depend on how the list item is embedded in other constructions, as shown by this example:

   > > 1.  one
>>
>>     two
.
<blockquote>
<blockquote>
<ol>
<li>
<p>one</p>
<p>two</p>
</li>
</ol>
</blockquote>
</blockquote>

Here two occurs in the same column as the list marker 1., but is actually contained in the list item, because there is sufficient indentation after the last containing blockquote marker.

The converse is also possible. In the following example, the word two occurs far to the right of the initial text of the list item, one, but it is not considered part of the list item, because it is not indented far enough past the blockquote marker:

>>- one
>>
  >  > two
.
<blockquote>
<blockquote>
<ul>
<li>one</li>
</ul>
<p>two</p>
</blockquote>
</blockquote>

Note that at least one space is needed between the list marker and any following content, so these are not list items:

-one

2.two
.
<p>-one</p>
<p>2.two</p>

A list item may contain blocks that are separated by more than one blank line.

- foo


  bar
.
<ul>
<li>
<p>foo</p>
<p>bar</p>
</li>
</ul>

A list item may contain any kind of block:

1.  foo

    ```
    bar
    ```

    baz

    > bam
.
<ol>
<li>
<p>foo</p>
<pre><code>bar
</code></pre>
<p>baz</p>
<blockquote>
<p>bam</p>
</blockquote>
</li>
</ol>

A list item that contains an indented code block will preserve empty lines within the code block verbatim.

- Foo

      bar


      baz
.
<ul>
<li>
<p>Foo</p>
<pre><code>bar


baz
</code></pre>
</li>
</ul>

Note that ordered list start numbers must be nine digits or less:

123456789. ok
.
<ol start="123456789">
<li>ok</li>
</ol>

1234567890. not ok
.
<p>1234567890. not ok</p>

A start number may begin with 0s:

0. ok
.
<ol start="0">
<li>ok</li>
</ol>

003. ok
.
<ol start="3">
<li>ok</li>
</ol>

A start number may not be negative:

-1. not ok
.
<p>-1. not ok</p>

Item starting with indented code. If a sequence of lines Ls constitute a sequence of blocks Bs starting with an indented code block and not separated from each other by more than one blank line, and M is a list marker of width W followed by one space, then the result of prepending M and the following space to the first line of Ls, and indenting subsequent lines of Ls by W + 1 spaces, is a list item with Bs as its contents. If a line is empty, then it need not be indented. The type of the list item (bullet or ordered) is determined by the type of its list marker. If the list item is ordered, then it is also assigned a start number, based on the ordered list marker.

An indented code block will have to be indented four spaces beyond the edge of the region where text will be included in the list item. In the following case that is 6 spaces:

- foo

      bar
.
<ul>
<li>
<p>foo</p>
<pre><code>bar
</code></pre>
</li>
</ul>

And in this case it is 11 spaces:

  10.  foo

           bar
.
<ol start="10">
<li>
<p>foo</p>
<pre><code>bar
</code></pre>
</li>
</ol>

If the first block in the list item is an indented code block, then by rule #2, the contents must be indented one space after the list marker:

    indented code

paragraph

    more code
.
<pre><code>indented code
</code></pre>
<p>paragraph</p>
<pre><code>more code
</code></pre>

1.     indented code

   paragraph

       more code
.
<ol>
<li>
<pre><code>indented code
</code></pre>
<p>paragraph</p>
<pre><code>more code
</code></pre>
</li>
</ol>

Note that an additional space indent is interpreted as space inside the code block:

1.      indented code

   paragraph

       more code
.
<ol>
<li>
<pre><code> indented code
</code></pre>
<p>paragraph</p>
<pre><code>more code
</code></pre>
</li>
</ol>

Note that rules #1 and #2 only apply to two cases: (a) cases in which the lines to be included in a list item begin with a [non-whitespace character], and (b) cases in which they begin with an indented code block. In a case like the following, where the first block begins with a three-space indent, the rules do not allow us to form a list item by indenting the whole thing and prepending a list marker:

   foo

bar
.
<p>foo</p>
<p>bar</p>

-    foo

  bar
.
<ul>
<li>foo</li>
</ul>
<p>bar</p>

This is not a significant restriction, because when a block begins with 1-3 spaces indent, the indentation can always be removed without a change in interpretation, allowing rule #1 to be applied. So, in the above case:

-  foo

   bar
.
<ul>
<li>
<p>foo</p>
<p>bar</p>
</li>
</ul>

Item starting with a blank line. If a sequence of lines Ls starting with a single [blank line] constitute a (possibly empty) sequence of blocks Bs, not separated from each other by more than one blank line, and M is a list marker of width W, then the result of prepending M to the first line of Ls, and indenting subsequent lines of Ls by W + 1 spaces, is a list item with Bs as its contents. If a line is empty, then it need not be indented. The type of the list item (bullet or ordered) is determined by the type of its list marker. If the list item is ordered, then it is also assigned a start number, based on the ordered list marker.

Here are some list items that start with a blank line but are not empty:

-
  foo
-
  ```
  bar
  ```
-
      baz
.
<ul>
<li>foo</li>
<li>
<pre><code>bar
</code></pre>
</li>
<li>
<pre><code>baz
</code></pre>
</li>
</ul>

When the list item starts with a blank line, the number of spaces following the list marker doesn't change the required indentation:

-   
  foo
.
<ul>
<li>foo</li>
</ul>

A list item can begin with at most one blank line. In the following example, foo is not part of the list item:

-

  foo
.
<ul>
<li></li>
</ul>
<p>foo</p>

Here is an empty bullet list item:

- foo
-
- bar
.
<ul>
<li>foo</li>
<li></li>
<li>bar</li>
</ul>

It does not matter whether there are spaces following the [list marker]:

- foo
-   
- bar
.
<ul>
<li>foo</li>
<li></li>
<li>bar</li>
</ul>

Here is an empty ordered list item:

1. foo
2.
3. bar
.
<ol>
<li>foo</li>
<li></li>
<li>bar</li>
</ol>

A list may start or end with an empty list item:

*
.
<ul>
<li></li>
</ul>

However, an empty list item cannot interrupt a paragraph:

foo
*

foo
1.
.
<p>foo
*</p>
<p>foo
1.</p>

Indentation. If a sequence of lines Ls constitutes a list item according to rule #1, #2, or #3, then the result of indenting each line of Ls by 1-3 spaces (the same for each line) also constitutes a list item with the same contents and attributes. If a line is empty, then it need not be indented.

Indented one space:

 1.  A paragraph
     with two lines.

         indented code

     > A block quote.
.
<ol>
<li>
<p>A paragraph
with two lines.</p>
<pre><code>indented code
</code></pre>
<blockquote>
<p>A block quote.</p>
</blockquote>
</li>
</ol>

Indented two spaces:

  1.  A paragraph
      with two lines.

          indented code

      > A block quote.
.
<ol>
<li>
<p>A paragraph
with two lines.</p>
<pre><code>indented code
</code></pre>
<blockquote>
<p>A block quote.</p>
</blockquote>
</li>
</ol>

Indented three spaces:

   1.  A paragraph
       with two lines.

           indented code

       > A block quote.
.
<ol>
<li>
<p>A paragraph
with two lines.</p>
<pre><code>indented code
</code></pre>
<blockquote>
<p>A block quote.</p>
</blockquote>
</li>
</ol>

Four spaces indent gives a code block:

    1.  A paragraph
        with two lines.

            indented code

        > A block quote.
.
<pre><code>1.  A paragraph
    with two lines.

        indented code

    &gt; A block quote.
</code></pre>

Laziness. If a string of lines Ls constitute a list item with contents Bs, then the result of deleting some or all of the indentation from one or more lines in which the next [non-whitespace character] after the indentation is [paragraph continuation text] is a list item with the same contents and attributes. The unindented lines are called lazy continuation lines.

Here is an example with [lazy continuation lines]:

  1.  A paragraph
with two lines.

          indented code

      > A block quote.
.
<ol>
<li>
<p>A paragraph
with two lines.</p>
<pre><code>indented code
</code></pre>
<blockquote>
<p>A block quote.</p>
</blockquote>
</li>
</ol>

Indentation can be partially deleted:

  1.  A paragraph
    with two lines.
.
<ol>
<li>A paragraph
with two lines.</li>
</ol>

These examples show how laziness can work in nested structures:

> 1. > Blockquote
continued here.
.
<blockquote>
<ol>
<li>
<blockquote>
<p>Blockquote
continued here.</p>
</blockquote>
</li>
</ol>
</blockquote>

> 1. > Blockquote
> continued here.
.
<blockquote>
<ol>
<li>
<blockquote>
<p>Blockquote
continued here.</p>
</blockquote>
</li>
</ol>
</blockquote>

That's all. Nothing that is not counted as a list item by rules #1--5 counts as a list item.

The rules for sublists follow from the general rules above. A sublist must be indented the same number of spaces a paragraph would need to be in order to be included in the list item.

So, in this case we need two spaces indent:

- foo
  - bar
    - baz
      - boo
.
<ul>
<li>foo
<ul>
<li>bar
<ul>
<li>baz
<ul>
<li>boo</li>
</ul>
</li>
</ul>
</li>
</ul>
</li>
</ul>

One is not enough:

- foo
 - bar
  - baz
   - boo
.
<ul>
<li>foo</li>
<li>bar</li>
<li>baz</li>
<li>boo</li>
</ul>

Here we need four, because the list marker is wider:

10) foo
    - bar
.
<ol start="10">
<li>foo
<ul>
<li>bar</li>
</ul>
</li>
</ol>

Three is not enough:

10) foo
   - bar
.
<ol start="10">
<li>foo</li>
</ol>
<ul>
<li>bar</li>
</ul>

A list may be the first block in a list item:

- - foo
.
<ul>
<li>
<ul>
<li>foo</li>
</ul>
</li>
</ul>

1. - 2. foo
.
<ol>
<li>
<ul>
<li>
<ol start="2">
<li>foo</li>
</ol>
</li>
</ul>
</li>
</ol>

A list item can contain a heading:

- # Foo
- Bar
  ---
  baz
.
<ul>
<li>
<h1>Foo</h1>
</li>
<li>
<h2>Bar</h2>
baz</li>
</ul>

Motivation

John Gruber's Markdown spec says the following about list items:

"List markers typically start at the left margin, but may be indented by up to three spaces. List markers must be followed by one or more spaces or a tab."
"To make lists look nice, you can wrap items with hanging indents.... But if you don't want to, you don't have to."
"List items may consist of multiple paragraphs. Each subsequent paragraph in a list item must be indented by either 4 spaces or one tab."
"It looks nice if you indent every line of the subsequent paragraphs, but here again, Markdown will allow you to be lazy."
"To put a blockquote within a list item, the blockquote's > delimiters need to be indented."
"To put a code block within a list item, the code block needs to be indented twice — 8 spaces or two tabs."

These rules specify that a paragraph under a list item must be indented four spaces (presumably, from the left margin, rather than the start of the list marker, but this is not said), and that code under a list item must be indented eight spaces instead of the usual four. They also say that a block quote must be indented, but not by how much; however, the example given has four spaces indentation. Although nothing is said about other kinds of block-level content, it is certainly reasonable to infer that all block elements under a list item, including other lists, must be indented four spaces. This principle has been called the four-space rule.

The four-space rule is clear and principled, and if the reference implementation Markdown.pl had followed it, it probably would have become the standard. However, Markdown.pl allowed paragraphs and sublists to start with only two spaces indentation, at least on the outer level. Worse, its behavior was inconsistent: a sublist of an outer-level list needed two spaces indentation, but a sublist of this sublist needed three spaces. It is not surprising, then, that different implementations of Markdown have developed very different rules for determining what comes under a list item. (Pandoc and python-Markdown, for example, stuck with Gruber's syntax description and the four-space rule, while discount, redcarpet, marked, PHP Markdown, and others followed Markdown.pl's behavior more closely.)

Unfortunately, given the divergences between implementations, there is no way to give a spec for list items that will be guaranteed not to break any existing documents. However, the spec given here should correctly handle lists formatted with either the four-space rule or the more forgiving Markdown.pl behavior, provided they are laid out in a way that is natural for a human to read.

The strategy here is to let the width and indentation of the list marker determine the indentation necessary for blocks to fall under the list item, rather than having a fixed and arbitrary number. The writer can think of the body of the list item as a unit which gets indented to the right enough to fit the list marker (and any indentation on the list marker). (The laziness rule, #5, then allows continuation lines to be unindented if needed.)

This rule is superior, we claim, to any rule requiring a fixed level of indentation from the margin. The four-space rule is clear but unnatural. It is quite unintuitive that

- foo

  bar

  - baz

should be parsed as two lists with an intervening paragraph,

<ul>
<li>foo</li>
</ul>
<p>bar</p>
<ul>
<li>baz</li>
</ul>

as the four-space rule demands, rather than a single list,

<ul>
<li>
<p>foo</p>
<p>bar</p>
<ul>
<li>baz</li>
</ul>
</li>
</ul>

The choice of four spaces is arbitrary. It can be learned, but it is not likely to be guessed, and it trips up beginners regularly.

Would it help to adopt a two-space rule? The problem is that such a rule, together with the rule allowing 1--3 spaces indentation of the initial list marker, allows text that is indented less than the original list marker to be included in the list item. For example, Markdown.pl parses

   - one

  two

as a single list item, with two a continuation paragraph:

<ul>
<li>
<p>one</p>
<p>two</p>
</li>
</ul>

and similarly

>   - one
>
>  two

as

<blockquote>
<ul>
<li>
<p>one</p>
<p>two</p>
</li>
</ul>
</blockquote>

This is extremely unintuitive.

Rather than requiring a fixed indent from the margin, we could require a fixed indent (say, two spaces, or even one space) from the list marker (which may itself be indented). This proposal would remove the last anomaly discussed. Unlike the spec presented above, it would count the following as a list item with a subparagraph, even though the paragraph bar is not indented as far as the first paragraph foo:

 10. foo

   bar

Arguably this text does read like a list item with bar as a subparagraph, which may count in favor of the proposal. However, on this proposal indented code would have to be indented six spaces after the list marker. And this would break a lot of existing Markdown, which has the pattern:

1.  foo

        indented code

where the code is indented eight spaces. The spec above, by contrast, will parse this text as expected, since the code block's indentation is measured from the beginning of foo.

The one case that needs special treatment is a list item that starts with indented code. How much indentation is required in that case, since we don't have a "first paragraph" to measure from? Rule #2 simply stipulates that in such cases, we require one space indentation from the list marker (and then the normal four spaces for the indented code). This will match the four-space rule in cases where the list marker plus its initial indentation takes four spaces (a common case), but diverge in other cases.

Lists

A list is a sequence of one or more list items [of the same type]. The list items may be separated by any number of blank lines.

Two list items are of the same type if they begin with a [list marker] of the same type. Two list markers are of the same type if (a) they are bullet list markers using the same character (-, +, or *) or (b) they are ordered list numbers with the same delimiter (either . or )).

A list is an ordered list if its constituent list items begin with [ordered list markers], and a bullet list if its constituent list items begin with [bullet list markers].

The start number of an [ordered list] is determined by the list number of its initial list item. The numbers of subsequent list items are disregarded.

A list is loose if any of its constituent list items are separated by blank lines, or if any of its constituent list items directly contain two block-level elements with a blank line between them. Otherwise a list is tight. (The difference in HTML output is that paragraphs in a loose list are wrapped in <p> tags, while paragraphs in a tight list are not.)

Changing the bullet or ordered list delimiter starts a new list:

- foo
- bar
+ baz
.
<ul>
<li>foo</li>
<li>bar</li>
</ul>
<ul>
<li>baz</li>
</ul>

1. foo
2. bar
3) baz
.
<ol>
<li>foo</li>
<li>bar</li>
</ol>
<ol start="3">
<li>baz</li>
</ol>

In CommonMark, a list can interrupt a paragraph. That is, no blank line is needed to separate a paragraph from a following list:

Foo
- bar
- baz
.
<p>Foo</p>
<ul>
<li>bar</li>
<li>baz</li>
</ul>

Markdown.pl does not allow this, through fear of triggering a list via a numeral in a hard-wrapped line:

The number of windows in my house is
14.  The number of doors is 6.

Oddly, though, Markdown.pl does allow a blockquote to interrupt a paragraph, even though the same considerations might apply.

In CommonMark, we do allow lists to interrupt paragraphs, for two reasons. First, it is natural and not uncommon for people to start lists without blank lines:

I need to buy
- new shoes
- a coat
- a plane ticket

Second, we are attracted to a

principle of uniformity: if a chunk of text has a certain meaning, it will continue to have the same meaning when put into a container block (such as a list item or blockquote).

(Indeed, the spec for [list items] and [block quotes] presupposes this principle.) This principle implies that if

  * I need to buy
    - new shoes
    - a coat
    - a plane ticket

is a list item containing a paragraph followed by a nested sublist, as all Markdown implementations agree it is (though the paragraph may be rendered without <p> tags, since the list is "tight"), then

I need to buy
- new shoes
- a coat
- a plane ticket

by itself should be a paragraph followed by a nested sublist.

Since it is well established Markdown practice to allow lists to interrupt paragraphs inside list items, the [principle of uniformity] requires us to allow this outside list items as well. (reStructuredText takes a different approach, requiring blank lines before lists even inside other list items.)

In order to solve of unwanted lists in paragraphs with hard-wrapped numerals, we allow only lists starting with 1 to interrupt paragraphs. Thus,

The number of windows in my house is
14.  The number of doors is 6.
.
<p>The number of windows in my house is
14.  The number of doors is 6.</p>

We may still get an unintended result in cases like

The number of windows in my house is
1.  The number of doors is 6.
.
<p>The number of windows in my house is</p>
<ol>
<li>The number of doors is 6.</li>
</ol>

but this rule should prevent most spurious list captures.

There can be any number of blank lines between items:

- foo

- bar


- baz
.
<ul>
<li>
<p>foo</p>
</li>
<li>
<p>bar</p>
</li>
<li>
<p>baz</p>
</li>
</ul>

- foo
  - bar
    - baz


      bim
.
<ul>
<li>foo
<ul>
<li>bar
<ul>
<li>
<p>baz</p>
<p>bim</p>
</li>
</ul>
</li>
</ul>
</li>
</ul>

To separate consecutive lists of the same type, or to separate a list from an indented code block that would otherwise be parsed as a subparagraph of the final list item, you can insert a blank HTML comment:

- foo
- bar

<!-- -->

- baz
- bim
.
<ul>
<li>foo</li>
<li>bar</li>
</ul>
<!-- -->
<ul>
<li>baz</li>
<li>bim</li>
</ul>

-   foo

    notcode

-   foo

<!-- -->

    code
.
<ul>
<li>
<p>foo</p>
<p>notcode</p>
</li>
<li>
<p>foo</p>
</li>
</ul>
<!-- -->
<pre><code>code
</code></pre>

List items need not be indented to the same level. The following list items will be treated as items at the same list level, since none is indented enough to belong to the previous list item:

- a
 - b
  - c
   - d
    - e
   - f
  - g
 - h
- i
.
<ul>
<li>a</li>
<li>b</li>
<li>c</li>
<li>d</li>
<li>e</li>
<li>f</li>
<li>g</li>
<li>h</li>
<li>i</li>
</ul>

1. a

  2. b

    3. c
.
<ol>
<li>
<p>a</p>
</li>
<li>
<p>b</p>
</li>
<li>
<p>c</p>
</li>
</ol>

This is a loose list, because there is a blank line between two of the list items:

- a
- b

- c
.
<ul>
<li>
<p>a</p>
</li>
<li>
<p>b</p>
</li>
<li>
<p>c</p>
</li>
</ul>

So is this, with a empty second item:

* a
*

* c
.
<ul>
<li>
<p>a</p>
</li>
<li></li>
<li>
<p>c</p>
</li>
</ul>

These are loose lists, even though there is no space between the items, because one of the items directly contains two block-level elements with a blank line between them:

- a
- b

  c
- d
.
<ul>
<li>
<p>a</p>
</li>
<li>
<p>b</p>
<p>c</p>
</li>
<li>
<p>d</p>
</li>
</ul>

- a
- b

  [ref]: /url
- d
.
<ul>
<li>
<p>a</p>
</li>
<li>
<p>b</p>
</li>
<li>
<p>d</p>
</li>
</ul>

This is a tight list, because the blank lines are in a code block:

- a
- ```
  b


  ```
- c
.
<ul>
<li>a</li>
<li>
<pre><code>b


</code></pre>
</li>
<li>c</li>
</ul>

This is a tight list, because the blank line is between two paragraphs of a sublist. So the sublist is loose while the outer list is tight:

- a
  - b

    c
- d
.
<ul>
<li>a
<ul>
<li>
<p>b</p>
<p>c</p>
</li>
</ul>
</li>
<li>d</li>
</ul>

This is a tight list, because the blank line is inside the block quote:

* a
  > b
  >
* c
.
<ul>
<li>a
<blockquote>
<p>b</p>
</blockquote>
</li>
<li>c</li>
</ul>

This list is tight, because the consecutive block elements are not separated by blank lines:

- a
  > b
  ```
  c
  ```
- d
.
<ul>
<li>a
<blockquote>
<p>b</p>
</blockquote>
<pre><code>c
</code></pre>
</li>
<li>d</li>
</ul>

A single-paragraph list is tight:

- a
.
<ul>
<li>a</li>
</ul>

- a
  - b
.
<ul>
<li>a
<ul>
<li>b</li>
</ul>
</li>
</ul>

This list is loose, because of the blank line between the two block elements in the list item:

1. ```
   foo
   ```

   bar
.
<ol>
<li>
<pre><code>foo
</code></pre>
<p>bar</p>
</li>
</ol>

Here the outer list is loose, the inner list tight:

* foo
  * bar

  baz
.
<ul>
<li>
<p>foo</p>
<ul>
<li>bar</li>
</ul>
<p>baz</p>
</li>
</ul>

- a
  - b
  - c

- d
  - e
  - f
.
<ul>
<li>
<p>a</p>
<ul>
<li>b</li>
<li>c</li>
</ul>
</li>
<li>
<p>d</p>
<ul>
<li>e</li>
<li>f</li>
</ul>
</li>
</ul>

Inlines

Inlines are parsed sequentially from the beginning of the character stream to the end (left to right, in left-to-right languages). Thus, for example, in

`hi`lo`
.
<p><code>hi</code>lo`</p>

hi is parsed as code, leaving the backtick at the end as a literal backtick.

Abbreviations (extension)

UFM adds the abbreviation extension, which allows you to add additional information to your abbreviations. The syntax is as follows:

[asterisk] (*) followed by the abbreviation inside [square brackets] ([]), a [colon] (:) and the abbreviation meaning inside [square brackets] ([]).

Here is a simple example:

*[HTML]: [HyperText Markup Language]

<p><abbr title="HyperText Markup Language">HTML</abbr></p>

Backslash escapes

Any ASCII punctuation character may be backslash-escaped:

\!\"\#\$\%\&\'\(\)\*\+\,\-\.\/\:\;\<\=\>\?\@\[\\\]\^\_\`\{\|\}\~
.
<p>!&quot;#$%&amp;'()*+,-./:;&lt;=&gt;?@[\]^_`{|}~</p>

Backslashes before other characters are treated as literal backslashes:

\→\A\a\ \3\φ\«
.
<p>\→\A\a\ \3\φ\«</p>

Escaped characters are treated as regular characters and do not have their usual Markdown meanings:

\*not emphasized*
\<br/> not a tag
\[not a link](/foo)
\`not code`
1\. not a list
\* not a list
\# not a heading
\[foo]: /url "not a reference"
.
<p>*not emphasized*
&lt;br/&gt; not a tag
[not a link](/foo)
`not code`
1. not a list
* not a list
# not a heading
[foo]: /url &quot;not a reference&quot;</p>

If a backslash is itself escaped, the following character is not:

\\*emphasis*
.
<p>\<em>emphasis</em></p>

A backslash at the end of the line is a [hard line break]:

foo\
bar
.
<p>foo<br />
bar</p>

Backslash escapes do not work in code blocks, code spans, autolinks, or raw HTML:

`` \[\` ``
.
<p><code>\[\`</code></p>

    \[\]
.
<pre><code>\[\]
</code></pre>

~~~
\[\]
~~~
.
<pre><code>\[\]
</code></pre>

<http://example.com?find=\*>
.
<p><a href="http://example.com?find=%5C*">http://example.com?find=\*</a></p>

<a href="/bar\/)">
.
<a href="/bar\/)">

But they work in all other contexts, including URLs and link titles, link references, and [info strings] in [fenced code blocks]:

[foo](/bar\* "ti\*tle")
.
<p><a href="/bar*" title="ti*tle">foo</a></p>

[foo]

[foo]: /bar\* "ti\*tle"
.
<p><a href="/bar*" title="ti*tle">foo</a></p>

``` foo\+bar
foo
```
.
<pre><code class="language-foo+bar">foo
</code></pre>

Entity and numeric character references

All valid HTML entity references and numeric character references, except those occuring in code blocks and code spans, are recognized as such and treated as equivalent to the corresponding Unicode characters. Conforming CommonMark parsers need not store information about whether a particular character was represented in the source using a Unicode character or an entity reference.

Entity references consist of & + any of the valid HTML5 entity names + ;. The document https://html.spec.whatwg.org/multipage/entities.json is used as an authoritative source for the valid entity references and their corresponding code points.

&nbsp; &amp; &copy; &AElig; &Dcaron;
&frac34; &HilbertSpace; &DifferentialD;
&ClockwiseContourIntegral; &ngE;
.
<p>  &amp; © Æ Ď
¾ ℋ ⅆ
∲ ≧̸</p>

Decimal numeric character references consist of &# + a string of 1--8 arabic digits + ;. A numeric character reference is parsed as the corresponding Unicode character. Invalid Unicode code points will be replaced by the REPLACEMENT CHARACTER (U+FFFD). For security reasons, the code point U+0000 will also be replaced by U+FFFD.

&#35; &#1234; &#992; &#98765432; &#0;
.
<p># Ӓ Ϡ � �</p>

Hexadecimal numeric character references consist of &# + either X or x + a string of 1-8 hexadecimal digits + ;. They too are parsed as the corresponding Unicode character (this time specified with a hexadecimal numeral instead of decimal).

&#X22; &#XD06; &#xcab;
.
<p>&quot; ആ ಫ</p>

Here are some nonentities:

&nbsp &x; &#; &#x;
&ThisIsNotDefined; &hi?;
.
<p>&amp;nbsp &amp;x; &amp;#; &amp;#x;
&amp;ThisIsNotDefined; &amp;hi?;</p>

Although HTML5 does accept some entity references without a trailing semicolon (such as &copy), these are not recognized here, because it makes the grammar too ambiguous:

&copy
.
<p>&amp;copy</p>

Strings that are not on the list of HTML5 named entities are not recognized as entity references either:

&MadeUpEntity;
.
<p>&amp;MadeUpEntity;</p>

Entity and numeric character references are recognized in any context besides code spans or code blocks, including URLs, [link titles], and [fenced code block][] [info strings]:

<a href="&ouml;&ouml;.html">
.
<a href="&ouml;&ouml;.html">

[foo](/f&ouml;&ouml; "f&ouml;&ouml;")
.
<p><a href="/f%C3%B6%C3%B6" title="föö">foo</a></p>

[foo]

[foo]: /f&ouml;&ouml; "f&ouml;&ouml;"
.
<p><a href="/f%C3%B6%C3%B6" title="föö">foo</a></p>

``` f&ouml;&ouml;
foo
```
.
<pre><code class="language-föö">foo
</code></pre>

Entity and numeric character references are treated as literal text in code spans and code blocks:

`f&ouml;&ouml;`
.
<p><code>f&amp;ouml;&amp;ouml;</code></p>

    f&ouml;f&ouml;
.
<pre><code>f&amp;ouml;f&amp;ouml;
</code></pre>

Code spans

A backtick string is a string of one or more backtick characters (`) that is neither preceded nor followed by a backtick.

A code span begins with a backtick string and ends with a backtick string of equal length. The contents of the code span are the characters between the two backtick strings, with leading and trailing spaces and [line endings] removed, and [whitespace] collapsed to single spaces.

This is a simple code span:

`foo`
.
<p><code>foo</code></p>

Here two backticks are used, because the code contains a backtick. This example also illustrates stripping of leading and trailing spaces:

`` foo ` bar  ``
.
<p><code>foo ` bar</code></p>

This example shows the motivation for stripping leading and trailing spaces:

` `` `
.
<p><code>``</code></p>

[Line endings] are treated like spaces:

``
foo
``
.
<p><code>foo</code></p>

Interior spaces and [line endings] are collapsed into single spaces, just as they would be by a browser:

`foo   bar
  baz`
.
<p><code>foo bar baz</code></p>

Not all [Unicode whitespace] (for instance, non-breaking space) is collapsed, however:

`a  b`
.
<p><code>a  b</code></p>

Q: Why not just leave the spaces, since browsers will collapse them anyway? A: Because we might be targeting a non-HTML format, and we shouldn't rely on HTML-specific rendering assumptions.

(Existing implementations differ in their treatment of internal spaces and [line endings]. Some, including Markdown.pl and showdown, convert an internal [line ending] into a <br /> tag. But this makes things difficult for those who like to hard-wrap their paragraphs, since a line break in the midst of a code span will cause an unintended line break in the output. Others just leave internal spaces as they are, which is fine if only HTML is being targeted.)

`foo `` bar`
.
<p><code>foo `` bar</code></p>

Note that backslash escapes do not work in code spans. All backslashes are treated literally:

`foo\`bar`
.
<p><code>foo\</code>bar`</p>

Backslash escapes are never needed, because one can always choose a string of n backtick characters as delimiters, where the code does not contain any strings of exactly n backtick characters.

Code span backticks have higher precedence than any other inline constructs except HTML tags and autolinks. Thus, for example, this is not parsed as emphasized text, since the second * is part of a code span:

*foo`*`
.
<p>*foo<code>*</code></p>

And this is not parsed as a link:

[not a `link](/foo`)
.
<p>[not a <code>link](/foo</code>)</p>

Code spans, HTML tags, and autolinks have the same precedence. Thus, this is code:

`<a href="`">`
.
<p><code>&lt;a href=&quot;</code>&quot;&gt;`</p>

But this is an HTML tag:

<a href="`">`
.
<p><a href="`">`</p>

And this is code:

`<http://foo.bar.`baz>`
.
<p><code>&lt;http://foo.bar.</code>baz&gt;`</p>

But this is an autolink:

<http://foo.bar.`baz>`
.
<p><a href="http://foo.bar.%60baz">http://foo.bar.`baz</a>`</p>

When a backtick string is not closed by a matching backtick string, we just have literal backticks:

```foo``
.
<p>```foo``</p>

`foo
.
<p>`foo</p>

The following case also illustrates the need for opening and closing backtick strings to be equal in length:

`foo``bar``
.
<p>`foo<code>bar</code></p>

Emojis (extension)

UFM adds an extension that allows you to add emojis to your documents. The syntax is very simple: You have to write the emoji name between [colons] (:). You can find a list of all the compatible emojis here.

Here is an example:

:+1:

<p><img src="https://assets-cdn.github.com/images/icons/emoji/unicode/1f44d.png?v7"></img></p>

Emphasis and strong emphasis

John Gruber's original Markdown syntax description says:

Markdown treats asterisks (*) and underscores (_) as indicators of emphasis. Text wrapped with one * or _ will be wrapped with an HTML <em> tag; double *'s or _'s will be wrapped with an HTML <strong> tag.

This is enough for most users, but these rules leave much undecided, especially when it comes to nested emphasis. The original Markdown.pl test suite makes it clear that triple *** and ___ delimiters can be used for strong emphasis, and most implementations have also allowed the following patterns:

***strong emph***
***strong** in emph*
***emph* in strong**
**in strong *emph***
*in emph **strong***

The following patterns are less widely supported, but the intent is clear and they are useful (especially in contexts like bibliography entries):

*emph *with emph* in it*
**strong **with strong** in it**

Many implementations have also restricted intraword emphasis to the * forms, to avoid unwanted emphasis in words containing internal underscores. (It is best practice to put these in code spans, but users often do not.)

internal emphasis: foo*bar*baz
no emphasis: foo_bar_baz

The rules given below capture all of these patterns, while allowing for efficient parsing strategies that do not backtrack.

First, some definitions. A delimiter run is either a sequence of one or more * characters that is not preceded or followed by a non-backslash-escaped * character, or a sequence of one or more _ characters that is not preceded or followed by a non-backslash-escaped _ character.

A left-flanking delimiter run is a [delimiter run] that is (a) not followed by [Unicode whitespace], and (b) not followed by a [punctuation character], or preceded by [Unicode whitespace] or a [punctuation character]. For purposes of this definition, the beginning and the end of the line count as Unicode whitespace.

A right-flanking delimiter run is a [delimiter run] that is (a) not preceded by [Unicode whitespace], and (b) not preceded by a [punctuation character], or followed by [Unicode whitespace] or a [punctuation character]. For purposes of this definition, the beginning and the end of the line count as Unicode whitespace.

Here are some examples of delimiter runs.

left-flanking but not right-flanking:
```
***abc
  _abc
**"abc"
 _"abc"
```
right-flanking but not left-flanking:
```
 abc***
 abc_
"abc"**
"abc"_
```
Both left and right-flanking:
```
 abc***def
"abc"_"def"
```
Neither left nor right-flanking:
```
abc *** def
a _ b
```

(The idea of distinguishing left-flanking and right-flanking delimiter runs based on the character before and the character after comes from Roopesh Chander's vfmd. vfmd uses the terminology "emphasis indicator string" instead of "delimiter run," and its rules for distinguishing left- and right-flanking runs are a bit more complex than the ones given here.)

The following rules define emphasis and strong emphasis:

A single * character can open emphasis iff (if and only if) it is part of a [left-flanking delimiter run].
A single _ character [can open emphasis] iff it is part of a [left-flanking delimiter run] and either (a) not part of a [right-flanking delimiter run] or (b) part of a [right-flanking delimiter run] preceded by punctuation.
A single * character can close emphasis iff it is part of a [right-flanking delimiter run].
A single _ character [can close emphasis] iff it is part of a [right-flanking delimiter run] and either (a) not part of a [left-flanking delimiter run] or (b) part of a [left-flanking delimiter run] followed by punctuation.
A double ** can open strong emphasis iff it is part of a [left-flanking delimiter run].
A double __ [can open strong emphasis] iff it is part of a [left-flanking delimiter run] and either (a) not part of a [right-flanking delimiter run] or (b) part of a [right-flanking delimiter run] preceded by punctuation.
A double ** can close strong emphasis iff it is part of a [right-flanking delimiter run].
A double __ [can close strong emphasis] iff it is part of a [right-flanking delimiter run] and either (a) not part of a [left-flanking delimiter run] or (b) part of a [left-flanking delimiter run] followed by punctuation.
Emphasis begins with a delimiter that [can open emphasis] and ends with a delimiter that [can close emphasis], and that uses the same character (_ or *) as the opening delimiter. The opening and closing delimiters must belong to separate [delimiter runs]. If one of the delimiters can both open and close emphasis, then the sum of the lengths of the delimiter runs containing the opening and closing delimiters must not be a multiple of 3.
Strong emphasis begins with a delimiter that [can open strong emphasis] and ends with a delimiter that [can close strong emphasis], and that uses the same character (_ or *) as the opening delimiter. The opening and closing delimiters must belong to separate [delimiter runs]. If one of the delimiters can both open and close strong emphasis, then the sum of the lengths of the delimiter runs containing the opening and closing delimiters must not be a multiple of 3.
A literal * character cannot occur at the beginning or end of *-delimited emphasis or **-delimited strong emphasis, unless it is backslash-escaped.
A literal _ character cannot occur at the beginning or end of _-delimited emphasis or __-delimited strong emphasis, unless it is backslash-escaped.

Where rules 1--12 above are compatible with multiple parsings, the following principles resolve ambiguity:

The number of nestings should be minimized. Thus, for example, an interpretation <strong>...</strong> is always preferred to <em><em>...</em></em>.
An interpretation <em><strong>...</strong></em> is always preferred to <strong><em>...</em></strong>.
When two potential emphasis or strong emphasis spans overlap, so that the second begins before the first ends and ends after the first ends, the first takes precedence. Thus, for example, *foo _bar* baz_ is parsed as <em>foo _bar</em> baz_ rather than *foo <em>bar* baz</em>.
When there are two potential emphasis or strong emphasis spans with the same closing delimiter, the shorter one (the one that opens later) takes precedence. Thus, for example, **foo **bar baz** is parsed as **foo <strong>bar baz</strong> rather than <strong>foo **bar baz</strong>.
Inline code spans, links, images, and HTML tags group more tightly than emphasis. So, when there is a choice between an interpretation that contains one of these elements and one that does not, the former always wins. Thus, for example, *[foo*](bar) is parsed as *<a href="bar">foo*</a> rather than as <em>[foo</em>](bar).

These rules can be illustrated through a series of examples.

Rule 1:

*foo bar*
.
<p><em>foo bar</em></p>

This is not emphasis, because the opening * is followed by whitespace, and hence not part of a [left-flanking delimiter run]:

a * foo bar*
.
<p>a * foo bar*</p>

This is not emphasis, because the opening * is preceded by an alphanumeric and followed by punctuation, and hence not part of a [left-flanking delimiter run]:

a*"foo"*
.
<p>a*&quot;foo&quot;*</p>

Unicode nonbreaking spaces count as whitespace, too:

* a *
.
<p>* a *</p>

Intraword emphasis with * is permitted:

foo*bar*
.
<p>foo<em>bar</em></p>

5*6*78
.
<p>5<em>6</em>78</p>

Rule 2:

_foo bar_
.
<p><em>foo bar</em></p>

This is not emphasis, because the opening _ is followed by whitespace:

_ foo bar_
.
<p>_ foo bar_</p>

This is not emphasis, because the opening _ is preceded by an alphanumeric and followed by punctuation:

a_"foo"_
.
<p>a_&quot;foo&quot;_</p>

Emphasis with _ is not allowed inside words:

foo_bar_
.
<p>foo_bar_</p>

5_6_78
.
<p>5_6_78</p>

пристаням_стремятся_
.
<p>пристаням_стремятся_</p>

Here _ does not generate emphasis, because the first delimiter run is right-flanking and the second left-flanking:

aa_"bb"_cc
.
<p>aa_&quot;bb&quot;_cc</p>

This is emphasis, even though the opening delimiter is both left- and right-flanking, because it is preceded by punctuation:

foo-_(bar)_
.
<p>foo-<em>(bar)</em></p>

Rule 3:

This is not emphasis, because the closing delimiter does not match the opening delimiter:

_foo*
.
<p>_foo*</p>

This is not emphasis, because the closing * is preceded by whitespace:

*foo bar *
.
<p>*foo bar *</p>

A newline also counts as whitespace:

*foo bar
*
.
<p>*foo bar
*</p>

This is not emphasis, because the second * is preceded by punctuation and followed by an alphanumeric (hence it is not part of a [right-flanking delimiter run]:

*(*foo)
.
<p>*(*foo)</p>

The point of this restriction is more easily appreciated with this example:

*(*foo*)*
.
<p><em>(<em>foo</em>)</em></p>

Intraword emphasis with * is allowed:

*foo*bar
.
<p><em>foo</em>bar</p>

Rule 4:

This is not emphasis, because the closing _ is preceded by whitespace:

_foo bar _
.
<p>_foo bar _</p>

This is not emphasis, because the second _ is preceded by punctuation and followed by an alphanumeric:

_(_foo)
.
<p>_(_foo)</p>

This is emphasis within emphasis:

_(_foo_)_
.
<p><em>(<em>foo</em>)</em></p>

Intraword emphasis is disallowed for _:

_foo_bar
.
<p>_foo_bar</p>

_пристаням_стремятся
.
<p>_пристаням_стремятся</p>

_foo_bar_baz_
.
<p><em>foo_bar_baz</em></p>

This is emphasis, even though the closing delimiter is both left- and right-flanking, because it is followed by punctuation:

_(bar)_.
.
<p><em>(bar)</em>.</p>

Rule 5:

**foo bar**
.
<p><strong>foo bar</strong></p>

This is not strong emphasis, because the opening delimiter is followed by whitespace:

** foo bar**
.
<p>** foo bar**</p>

This is not strong emphasis, because the opening ** is preceded by an alphanumeric and followed by punctuation, and hence not part of a [left-flanking delimiter run]:

a**"foo"**
.
<p>a**&quot;foo&quot;**</p>

Intraword strong emphasis with ** is permitted:

foo**bar**
.
<p>foo<strong>bar</strong></p>

Rule 6:

__foo bar__
.
<p><strong>foo bar</strong></p>

This is not strong emphasis, because the opening delimiter is followed by whitespace:

__ foo bar__
.
<p>__ foo bar__</p>

A newline counts as whitespace:

__
foo bar__
.
<p>__
foo bar__</p>

This is not strong emphasis, because the opening __ is preceded by an alphanumeric and followed by punctuation:

a__"foo"__
.
<p>a__&quot;foo&quot;__</p>

Intraword strong emphasis is forbidden with __:

foo__bar__
.
<p>foo__bar__</p>

5__6__78
.
<p>5__6__78</p>

пристаням__стремятся__
.
<p>пристаням__стремятся__</p>

__foo, __bar__, baz__
.
<p><strong>foo, <strong>bar</strong>, baz</strong></p>

This is strong emphasis, even though the opening delimiter is both left- and right-flanking, because it is preceded by punctuation:

foo-__(bar)__
.
<p>foo-<strong>(bar)</strong></p>

Rule 7:

This is not strong emphasis, because the closing delimiter is preceded by whitespace:

**foo bar **
.
<p>**foo bar **</p>

(Nor can it be interpreted as an emphasized *foo bar *, because of Rule 11.)

This is not strong emphasis, because the second ** is preceded by punctuation and followed by an alphanumeric:

**(**foo)
.
<p>**(**foo)</p>

The point of this restriction is more easily appreciated with these examples:

*(**foo**)*
.
<p><em>(<strong>foo</strong>)</em></p>

**Gomphocarpus (*Gomphocarpus physocarpus*, syn.
*Asclepias physocarpa*)**
.
<p><strong>Gomphocarpus (<em>Gomphocarpus physocarpus</em>, syn.
<em>Asclepias physocarpa</em>)</strong></p>

**foo "*bar*" foo**
.
<p><strong>foo &quot;<em>bar</em>&quot; foo</strong></p>

Intraword emphasis:

**foo**bar
.
<p><strong>foo</strong>bar</p>

Rule 8:

This is not strong emphasis, because the closing delimiter is preceded by whitespace:

__foo bar __
.
<p>__foo bar __</p>

This is not strong emphasis, because the second __ is preceded by punctuation and followed by an alphanumeric:

__(__foo)
.
<p>__(__foo)</p>

The point of this restriction is more easily appreciated with this example:

_(__foo__)_
.
<p><em>(<strong>foo</strong>)</em></p>

Intraword strong emphasis is forbidden with __:

__foo__bar
.
<p>__foo__bar</p>

__пристаням__стремятся
.
<p>__пристаням__стремятся</p>

__foo__bar__baz__
.
<p><strong>foo__bar__baz</strong></p>

This is strong emphasis, even though the closing delimiter is both left- and right-flanking, because it is followed by punctuation:

__(bar)__.
.
<p><strong>(bar)</strong>.</p>

Rule 9:

Any nonempty sequence of inline elements can be the contents of an emphasized span.

*foo [bar](/url)*
.
<p><em>foo <a href="/url">bar</a></em></p>

*foo
bar*
.
<p><em>foo
bar</em></p>

In particular, emphasis and strong emphasis can be nested inside emphasis:

_foo __bar__ baz_
.
<p><em>foo <strong>bar</strong> baz</em></p>

_foo _bar_ baz_
.
<p><em>foo <em>bar</em> baz</em></p>

__foo_ bar_
.
<p><em><em>foo</em> bar</em></p>

*foo *bar**
.
<p><em>foo <em>bar</em></em></p>

*foo **bar** baz*
.
<p><em>foo <strong>bar</strong> baz</em></p>

*foo**bar**baz*
.
<p><em>foo<strong>bar</strong>baz</em></p>

Note that in the preceding case, the interpretation

<p><em>foo</em><em>bar<em></em>baz</em></p>

is precluded by the condition that a delimiter that can both open and close (like the * after foo) cannot form emphasis if the sum of the lengths of the delimiter runs containing the opening and closing delimiters is a multiple of 3.

The same condition ensures that the following cases are all strong emphasis nested inside emphasis, even when the interior spaces are omitted:

***foo** bar*
.
<p><em><strong>foo</strong> bar</em></p>

*foo **bar***
.
<p><em>foo <strong>bar</strong></em></p>

*foo**bar***
.
<p><em>foo<strong>bar</strong></em></p>

Indefinite levels of nesting are possible:

*foo **bar *baz* bim** bop*
.
<p><em>foo <strong>bar <em>baz</em> bim</strong> bop</em></p>

*foo [*bar*](/url)*
.
<p><em>foo <a href="/url"><em>bar</em></a></em></p>

There can be no empty emphasis or strong emphasis:

** is not an empty emphasis
.
<p>** is not an empty emphasis</p>

**** is not an empty strong emphasis
.
<p>**** is not an empty strong emphasis</p>

Rule 10:

Any nonempty sequence of inline elements can be the contents of an strongly emphasized span.

**foo [bar](/url)**
.
<p><strong>foo <a href="/url">bar</a></strong></p>

**foo
bar**
.
<p><strong>foo
bar</strong></p>

In particular, emphasis and strong emphasis can be nested inside strong emphasis:

__foo _bar_ baz__
.
<p><strong>foo <em>bar</em> baz</strong></p>

__foo __bar__ baz__
.
<p><strong>foo <strong>bar</strong> baz</strong></p>

____foo__ bar__
.
<p><strong><strong>foo</strong> bar</strong></p>

**foo **bar****
.
<p><strong>foo <strong>bar</strong></strong></p>

**foo *bar* baz**
.
<p><strong>foo <em>bar</em> baz</strong></p>

**foo*bar*baz**
.
<p><strong>foo<em>bar</em>baz</strong></p>

***foo* bar**
.
<p><strong><em>foo</em> bar</strong></p>

**foo *bar***
.
<p><strong>foo <em>bar</em></strong></p>

Indefinite levels of nesting are possible:

**foo *bar **baz**
bim* bop**
.
<p><strong>foo <em>bar <strong>baz</strong>
bim</em> bop</strong></p>

**foo [*bar*](/url)**
.
<p><strong>foo <a href="/url"><em>bar</em></a></strong></p>

There can be no empty emphasis or strong emphasis:

__ is not an empty emphasis
.
<p>__ is not an empty emphasis</p>

____ is not an empty strong emphasis
.
<p>____ is not an empty strong emphasis</p>

Rule 11:

foo ***
.
<p>foo ***</p>

foo *\**
.
<p>foo <em>*</em></p>

foo *_*
.
<p>foo <em>_</em></p>

foo *****
.
<p>foo *****</p>

foo **\***
.
<p>foo <strong>*</strong></p>

foo **_**
.
<p>foo <strong>_</strong></p>

Note that when delimiters do not match evenly, Rule 11 determines that the excess literal * characters will appear outside of the emphasis, rather than inside it:

**foo*
.
<p>*<em>foo</em></p>

*foo**
.
<p><em>foo</em>*</p>

***foo**
.
<p>*<strong>foo</strong></p>

****foo*
.
<p>***<em>foo</em></p>

**foo***
.
<p><strong>foo</strong>*</p>

*foo****
.
<p><em>foo</em>***</p>

Rule 12:

foo ___
.
<p>foo ___</p>

foo _\__
.
<p>foo <em>_</em></p>

foo _*_
.
<p>foo <em>*</em></p>

foo _____
.
<p>foo _____</p>

foo __\___
.
<p>foo <strong>_</strong></p>

foo __*__
.
<p>foo <strong>*</strong></p>

__foo_
.
<p>_<em>foo</em></p>

Note that when delimiters do not match evenly, Rule 12 determines that the excess literal _ characters will appear outside of the emphasis, rather than inside it:

_foo__
.
<p><em>foo</em>_</p>

___foo__
.
<p>_<strong>foo</strong></p>

____foo_
.
<p>___<em>foo</em></p>

__foo___
.
<p><strong>foo</strong>_</p>

_foo____
.
<p><em>foo</em>___</p>

Rule 13 implies that if you want emphasis nested directly inside emphasis, you must use different delimiters:

**foo**
.
<p><strong>foo</strong></p>

*_foo_*
.
<p><em><em>foo</em></em></p>

__foo__
.
<p><strong>foo</strong></p>

_*foo*_
.
<p><em><em>foo</em></em></p>

However, strong emphasis within strong emphasis is possible without switching delimiters:

****foo****
.
<p><strong><strong>foo</strong></strong></p>

____foo____
.
<p><strong><strong>foo</strong></strong></p>

Rule 13 can be applied to arbitrarily long sequences of delimiters:

******foo******
.
<p><strong><strong><strong>foo</strong></strong></strong></p>

Rule 14:

***foo***
.
<p><em><strong>foo</strong></em></p>

_____foo_____
.
<p><em><strong><strong>foo</strong></strong></em></p>

Rule 15:

*foo _bar* baz_
.
<p><em>foo _bar</em> baz_</p>

*foo __bar *baz bim__ bam*
.
<p><em>foo <strong>bar *baz bim</strong> bam</em></p>

Rule 16:

**foo **bar baz**
.
<p>**foo <strong>bar baz</strong></p>

*foo *bar baz*
.
<p>*foo <em>bar baz</em></p>

Rule 17:

*[bar*](/url)
.
<p>*<a href="/url">bar*</a></p>

_foo [bar_](/url)
.
<p>_foo <a href="/url">bar_</a></p>

*<img src="foo" title="*"/>
.
<p>*<img src="foo" title="*"/></p>

**<a href="**">
.
<p>**<a href="**"></p>

__<a href="__">
.
<p>__<a href="__"></p>

*a `*`*
.
<p><em>a <code>*</code></em></p>

_a `_`_
.
<p><em>a <code>_</code></em></p>

**a<http://foo.bar/?q=**>
.
<p>**a<a href="http://foo.bar/?q=**">http://foo.bar/?q=**</a></p>

__a<http://foo.bar/?q=__>
.
<p>__a<a href="http://foo.bar/?q=__">http://foo.bar/?q=__</a></p>

Strikethrough (extension)

UFM enables the strikethrough extension, where an additional emphasis type is available.

Strikethrough text is any text wrapped in tildes (~).

~~Hi~~ Hello, world!
 
<p><del>Hi</del> Hello, world!</p>
Any number of tildes may be used on either side of the text; they do not need to match, and they cannot be nested.

This ~~text~~~~ is ~~~~curious~~.
 
<p>This <del>text</del><del> is </del><del>curious</del>.</p>

As with regular emphasis delimiters, a new paragraph will cause the cessation of parsing a strikethrough:

This ~~has a

new paragraph~~.
 
<p>This ~~has a</p>
<p>new paragraph~~.</p>

Links

A link contains [link text] (the visible text), a [link destination] (the URI that is the link destination), and optionally a [link title]. There are two basic kinds of links in Markdown. In [inline links] the destination and title are given immediately after the link text. In [reference links] the destination and title are defined elsewhere in the document.

A link text consists of a sequence of zero or more inline elements enclosed by square brackets ([ and ]). The following rules apply:

Links may not contain other links, at any level of nesting. If multiple otherwise valid link definitions appear nested inside each other, the inner-most definition is used.
Brackets are allowed in the [link text] only if (a) they are backslash-escaped or (b) they appear as a matched pair of brackets, with an open bracket [, a sequence of zero or more inlines, and a close bracket ].
Backtick [code spans], [autolinks], and raw [HTML tags] bind more tightly than the brackets in link text. Thus, for example, [foo`]` could not be a link text, since the second ] is part of a code span.
The brackets in link text bind more tightly than markers for [emphasis and strong emphasis]. Thus, for example, *[foo*](url) is a link.

A link destination consists of either

a sequence of zero or more characters between an opening < and a closing > that contains no spaces, line breaks, or unescaped < or > characters, or
a nonempty sequence of characters that does not include ASCII space or control characters, and includes parentheses only if (a) they are backslash-escaped or (b) they are part of a balanced pair of unescaped parentheses. (Implementations may impose limits on parentheses nesting to avoid performance issues, but at least three levels of nesting should be supported.)

A link title consists of either

a sequence of zero or more characters between straight double-quote characters ("), including a " character only if it is backslash-escaped, or
a sequence of zero or more characters between straight single-quote characters ('), including a ' character only if it is backslash-escaped, or
a sequence of zero or more characters between matching parentheses ((...)), including a ) character only if it is backslash-escaped.

Although [link titles] may span multiple lines, they may not contain a [blank line].

An inline link consists of a [link text] followed immediately by a left parenthesis (, optional [whitespace], an optional [link destination], an optional [link title] separated from the link destination by [whitespace], optional [whitespace], and a right parenthesis ). The link's text consists of the inlines contained in the [link text] (excluding the enclosing square brackets). The link's URI consists of the link destination, excluding enclosing <...> if present, with backslash-escapes in effect as described above. The link's title consists of the link title, excluding its enclosing delimiters, with backslash-escapes in effect as described above.

Here is a simple inline link:

[link](/uri "title")
.
<p><a href="/uri" title="title">link</a></p>

The title may be omitted:

[link](/uri)
.
<p><a href="/uri">link</a></p>

Both the title and the destination may be omitted:

[link]()
.
<p><a href="">link</a></p>

[link](<>)
.
<p><a href="">link</a></p>

The destination cannot contain spaces or line breaks, even if enclosed in pointy brackets:

[link](/my uri)
.
<p>[link](/my uri)</p>

[link](</my uri>)
.
<p>[link](&lt;/my uri&gt;)</p>

[link](foo
bar)
.
<p>[link](foo
bar)</p>

[link](<foo
bar>)
.
<p>[link](<foo
bar>)</p>

Parentheses inside the link destination may be escaped:

[link](\(foo\))
.
<p><a href="(foo)">link</a></p>

Any number of parentheses are allowed without escaping, as long as they are balanced:

[link](foo(and(bar)))
.
<p><a href="foo(and(bar))">link</a></p>

However, if you have unbalanced parentheses, you need to escape or use the <...> form:

[link](foo\(and\(bar\))
.
<p><a href="foo(and(bar)">link</a></p>

[link](<foo(and(bar)>)
.
<p><a href="foo(and(bar)">link</a></p>

Parentheses and other symbols can also be escaped, as usual in Markdown:

[link](foo\)\:)
.
<p><a href="foo):">link</a></p>

A link can contain fragment identifiers and queries:

[link](#fragment)

[link](http://example.com#fragment)

[link](http://example.com?foo=3#frag)
.
<p><a href="#fragment">link</a></p>
<p><a href="http://example.com#fragment">link</a></p>
<p><a href="http://example.com?foo=3#frag">link</a></p>

Note that a backslash before a non-escapable character is just a backslash:

[link](foo\bar)
.
<p><a href="foo%5Cbar">link</a></p>

URL-escaping should be left alone inside the destination, as all URL-escaped characters are also valid URL characters. Entity and numerical character references in the destination will be parsed into the corresponding Unicode code points, as usual. These may be optionally URL-escaped when written as HTML, but this spec does not enforce any particular policy for rendering URLs in HTML or other formats. Renderers may make different decisions about how to escape or normalize URLs in the output.

[link](foo%20b&auml;)
.
<p><a href="foo%20b%C3%A4">link</a></p>

Note that, because titles can often be parsed as destinations, if you try to omit the destination and keep the title, you'll get unexpected results:

[link]("title")
.
<p><a href="%22title%22">link</a></p>

Titles may be in single quotes, double quotes, or parentheses:

[link](/url "title")
[link](/url 'title')
[link](/url (title))
.
<p><a href="/url" title="title">link</a>
<a href="/url" title="title">link</a>
<a href="/url" title="title">link</a></p>

Backslash escapes and entity and numeric character references may be used in titles:

[link](/url "title \"&quot;")
.
<p><a href="/url" title="title &quot;&quot;">link</a></p>

Titles must be separated from the link using a [whitespace]. Other [Unicode whitespace] like non-breaking space doesn't work.

[link](/url "title")
.
<p><a href="/url%C2%A0%22title%22">link</a></p>

Nested balanced quotes are not allowed without escaping:

[link](/url "title "and" title")
.
<p>[link](/url &quot;title &quot;and&quot; title&quot;)</p>

But it is easy to work around this by using a different quote type:

[link](/url 'title "and" title')
.
<p><a href="/url" title="title &quot;and&quot; title">link</a></p>

(Note: Markdown.pl did allow double quotes inside a double-quoted title, and its test suite included a test demonstrating this. But it is hard to see a good rationale for the extra complexity this brings, since there are already many ways---backslash escaping, entity and numeric character references, or using a different quote type for the enclosing title---to write titles containing double quotes. Markdown.pl's handling of titles has a number of other strange features. For example, it allows single-quoted titles in inline links, but not reference links. And, in reference links but not inline links, it allows a title to begin with " and end with ). Markdown.pl 1.0.1 even allows titles with no closing quotation mark, though 1.0.2b8 does not. It seems preferable to adopt a simple, rational rule that works the same way in inline links and link reference definitions.)

[Whitespace] is allowed around the destination and title:

[link](   /uri
  "title"  )
.
<p><a href="/uri" title="title">link</a></p>

But it is not allowed between the link text and the following parenthesis:

[link] (/uri)
.
<p>[link] (/uri)</p>

The link text may contain balanced brackets, but not unbalanced ones, unless they are escaped:

[link [foo [bar]]](/uri)
.
<p><a href="/uri">link [foo [bar]]</a></p>

[link] bar](/uri)
.
<p>[link] bar](/uri)</p>

[link [bar](/uri)
.
<p>[link <a href="/uri">bar</a></p>

[link \[bar](/uri)
.
<p><a href="/uri">link [bar</a></p>

The link text may contain inline content:

[link *foo **bar** `#`*](/uri)
.
<p><a href="/uri">link <em>foo <strong>bar</strong> <code>#</code></em></a></p>

[![moon](moon.jpg)](/uri)
.
<p><a href="/uri"><img src="moon.jpg" alt="moon" /></a></p>

However, links may not contain other links, at any level of nesting.

[foo [bar](/uri)](/uri)
.
<p>[foo <a href="/uri">bar</a>](/uri)</p>

[foo *[bar [baz](/uri)](/uri)*](/uri)
.
<p>[foo <em>[bar <a href="/uri">baz</a>](/uri)</em>](/uri)</p>

![[[foo](uri1)](uri2)](uri3)
.
<p><img src="uri3" alt="[foo](uri2)" /></p>

These cases illustrate the precedence of link text grouping over emphasis grouping:

*[foo*](/uri)
.
<p>*<a href="/uri">foo*</a></p>

[foo *bar](baz*)
.
<p><a href="baz*">foo *bar</a></p>

Note that brackets that aren't part of links do not take precedence:

*foo [bar* baz]
.
<p><em>foo [bar</em> baz]</p>

These cases illustrate the precedence of HTML tags, code spans, and autolinks over link grouping:

[foo <bar attr="](baz)">
.
<p>[foo <bar attr="](baz)"></p>

[foo`](/uri)`
.
<p>[foo<code>](/uri)</code></p>

[foo<http://example.com/?search=](uri)>
.
<p>[foo<a href="http://example.com/?search=%5D(uri)">http://example.com/?search=](uri)</a></p>

There are three kinds of reference links: full, collapsed, and shortcut.

A full reference link consists of a [link text] immediately followed by a [link label] that [matches] a [link reference definition] elsewhere in the document.

A link label begins with a left bracket ([) and ends with the first right bracket (]) that is not backslash-escaped. Between these brackets there must be at least one [non-whitespace character]. Unescaped square bracket characters are not allowed inside the opening and closing square brackets of [link labels]. A link label can have at most 999 characters inside the square brackets.

One label matches another just in case their normalized forms are equal. To normalize a label, strip off the opening and closing brackets, perform the Unicode case fold, strip leading and trailing [whitespace] and collapse consecutive internal [whitespace] to a single space. If there are multiple matching reference link definitions, the one that comes first in the document is used. (It is desirable in such cases to emit a warning.)

The contents of the first link label are parsed as inlines, which are used as the link's text. The link's URI and title are provided by the matching [link reference definition].

Here is a simple example:

[foo][bar]

[bar]: /url "title"
.
<p><a href="/url" title="title">foo</a></p>

The rules for the [link text] are the same as with [inline links]. Thus:

The link text may contain balanced brackets, but not unbalanced ones, unless they are escaped:

[link [foo [bar]]][ref]

[ref]: /uri
.
<p><a href="/uri">link [foo [bar]]</a></p>

[link \[bar][ref]

[ref]: /uri
.
<p><a href="/uri">link [bar</a></p>

The link text may contain inline content:

[link *foo **bar** `#`*][ref]

[ref]: /uri
.
<p><a href="/uri">link <em>foo <strong>bar</strong> <code>#</code></em></a></p>

[![moon](moon.jpg)][ref]

[ref]: /uri
.
<p><a href="/uri"><img src="moon.jpg" alt="moon" /></a></p>

However, links may not contain other links, at any level of nesting.

[foo [bar](/uri)][ref]

[ref]: /uri
.
<p>[foo <a href="/uri">bar</a>]<a href="/uri">ref</a></p>

[foo *bar [baz][ref]*][ref]

[ref]: /uri
.
<p>[foo <em>bar <a href="/uri">baz</a></em>]<a href="/uri">ref</a></p>

(In the examples above, we have two [shortcut reference links] instead of one [full reference link].)

The following cases illustrate the precedence of link text grouping over emphasis grouping:

*[foo*][ref]

[ref]: /uri
.
<p>*<a href="/uri">foo*</a></p>

[foo *bar][ref]

[ref]: /uri
.
<p><a href="/uri">foo *bar</a></p>

These cases illustrate the precedence of HTML tags, code spans, and autolinks over link grouping:

[foo <bar attr="][ref]">

[ref]: /uri
.
<p>[foo <bar attr="][ref]"></p>

[foo`][ref]`

[ref]: /uri
.
<p>[foo<code>][ref]</code></p>

[foo<http://example.com/?search=][ref]>

[ref]: /uri
.
<p>[foo<a href="http://example.com/?search=%5D%5Bref%5D">http://example.com/?search=][ref]</a></p>

Matching is case-insensitive:

[foo][BaR]

[bar]: /url "title"
.
<p><a href="/url" title="title">foo</a></p>

Unicode case fold is used:

[Толпой][Толпой] is a Russian word.

[ТОЛПОЙ]: /url
.
<p><a href="/url">Толпой</a> is a Russian word.</p>

Consecutive internal [whitespace] is treated as one space for purposes of determining matching:

[Foo
  bar]: /url

[Baz][Foo bar]
.
<p><a href="/url">Baz</a></p>

No [whitespace] is allowed between the [link text] and the [link label]:

[foo] [bar]

[bar]: /url "title"
.
<p>[foo] <a href="/url" title="title">bar</a></p>

[foo]
[bar]

[bar]: /url "title"
.
<p>[foo]
<a href="/url" title="title">bar</a></p>

This is a departure from John Gruber's original Markdown syntax description, which explicitly allows whitespace between the link text and the link label. It brings reference links in line with [inline links], which (according to both original Markdown and this spec) cannot have whitespace after the link text. More importantly, it prevents inadvertent capture of consecutive [shortcut reference links]. If whitespace is allowed between the link text and the link label, then in the following we will have a single reference link, not two shortcut reference links, as intended:

[foo]
[bar]

[foo]: /url1
[bar]: /url2

(Note that [shortcut reference links] were introduced by Gruber himself in a beta version of Markdown.pl, but never included in the official syntax description. Without shortcut reference links, it is harmless to allow space between the link text and link label; but once shortcut references are introduced, it is too dangerous to allow this, as it frequently leads to unintended results.)

When there are multiple matching [link reference definitions], the first is used:

[foo]: /url1

[foo]: /url2

[bar][foo]
.
<p><a href="/url1">bar</a></p>

Note that matching is performed on normalized strings, not parsed inline content. So the following does not match, even though the labels define equivalent inline content:

[bar][foo\!]

[foo!]: /url
.
<p>[bar][foo!]</p>

[Link labels] cannot contain brackets, unless they are backslash-escaped:

[foo][ref[]

[ref[]: /uri
.
<p>[foo][ref[]</p>
<p>[ref[]: /uri</p>

[foo][ref[bar]]

[ref[bar]]: /uri
.
<p>[foo][ref[bar]]</p>
<p>[ref[bar]]: /uri</p>

[[[foo]]]

[[[foo]]]: /url
.
<p>[[[foo]]]</p>
<p>[[[foo]]]: /url</p>

[foo][ref\[]

[ref\[]: /uri
.
<p><a href="/uri">foo</a></p>

Note that in this example ] is not backslash-escaped:

[bar\\]: /uri

[bar\\]
.
<p><a href="/uri">bar\</a></p>

A [link label] must contain at least one [non-whitespace character]:

[]

[]: /uri
.
<p>[]</p>
<p>[]: /uri</p>

[
 ]

[
 ]: /uri
.
<p>[
]</p>
<p>[
]: /uri</p>

A collapsed reference link consists of a [link label] that [matches] a [link reference definition] elsewhere in the document, followed by the string []. The contents of the first link label are parsed as inlines, which are used as the link's text. The link's URI and title are provided by the matching reference link definition. Thus, [foo][] is equivalent to [foo][foo].

[foo][]

[foo]: /url "title"
.
<p><a href="/url" title="title">foo</a></p>

[*foo* bar][]

[*foo* bar]: /url "title"
.
<p><a href="/url" title="title"><em>foo</em> bar</a></p>

The link labels are case-insensitive:

[Foo][]

[foo]: /url "title"
.
<p><a href="/url" title="title">Foo</a></p>

As with full reference links, [whitespace] is not allowed between the two sets of brackets:

[foo] 
[]

[foo]: /url "title"
.
<p><a href="/url" title="title">foo</a>
[]</p>

A shortcut reference link consists of a [link label] that [matches] a [link reference definition] elsewhere in the document and is not followed by [] or a link label. The contents of the first link label are parsed as inlines, which are used as the link's text. The link's URI and title are provided by the matching link reference definition. Thus, [foo] is equivalent to [foo][].

[foo]

[foo]: /url "title"
.
<p><a href="/url" title="title">foo</a></p>

[*foo* bar]

[*foo* bar]: /url "title"
.
<p><a href="/url" title="title"><em>foo</em> bar</a></p>

[[*foo* bar]]

[*foo* bar]: /url "title"
.
<p>[<a href="/url" title="title"><em>foo</em> bar</a>]</p>

[[bar [foo]

[foo]: /url
.
<p>[[bar <a href="/url">foo</a></p>

The link labels are case-insensitive:

[Foo]

[foo]: /url "title"
.
<p><a href="/url" title="title">Foo</a></p>

A space after the link text should be preserved:

[foo] bar

[foo]: /url
.
<p><a href="/url">foo</a> bar</p>

If you just want bracketed text, you can backslash-escape the opening bracket to avoid links:

\[foo]

[foo]: /url "title"
.
<p>[foo]</p>

Note that this is a link, because a link label ends with the first following closing bracket:

[foo*]: /url

*[foo*]
.
<p>*<a href="/url">foo*</a></p>

Full and compact references take precedence over shortcut references:

[foo][bar]

[foo]: /url1
[bar]: /url2
.
<p><a href="/url2">foo</a></p>

[foo][]

[foo]: /url1
.
<p><a href="/url1">foo</a></p>

Inline links also take precedence:

[foo]()

[foo]: /url1
.
<p><a href="">foo</a></p>

[foo](not a link)

[foo]: /url1
.
<p><a href="/url1">foo</a>(not a link)</p>

In the following case [bar][baz] is parsed as a reference, [foo] as normal text:

[foo][bar][baz]

[baz]: /url
.
<p>[foo]<a href="/url">bar</a></p>

Here, though, [foo][bar] is parsed as a reference, since [bar] is defined:

[foo][bar][baz]

[baz]: /url1
[bar]: /url2
.
<p><a href="/url2">foo</a><a href="/url1">baz</a></p>

Here [foo] is not parsed as a shortcut reference, because it is followed by a link label (even though [bar] is not defined):

[foo][bar][baz]

[baz]: /url1
[foo]: /url2
.
<p>[foo]<a href="/url1">bar</a></p>

Link Generation (extension)

UFM allows you to specify an [at] character (@) to generate a link to the current page linking to the slug of the title of the link.

[Example link](@)
.
<p><a href="#example-link">Example Link</a></p>

Images

Syntax for images is like the syntax for links, with one difference. Instead of [link text], we have an image description. The rules for this are the same as for [link text], except that (a) an image description starts with ![ rather than [, and (b) an image description may contain links. An image description has inline elements as its contents. When an image is rendered to HTML, this is standardly used as the image's alt attribute.

![foo](/url "title")
.
<p><img src="/url" alt="foo" title="title" /></p>

![foo *bar*]

[foo *bar*]: train.jpg "train & tracks"
.
<p><img src="train.jpg" alt="foo bar" title="train &amp; tracks" /></p>

![foo ![bar](/url)](/url2)
.
<p><img src="/url2" alt="foo bar" /></p>

![foo [bar](/url)](/url2)
.
<p><img src="/url2" alt="foo bar" /></p>

Though this spec is concerned with parsing, not rendering, it is recommended that in rendering to HTML, only the plain string content of the [image description] be used. Note that in the above example, the alt attribute's value is foo bar, not foo [bar](/url) or foo <a href="/url">bar</a>. Only the plain string content is rendered, without formatting.

![foo *bar*][]

[foo *bar*]: train.jpg "train & tracks"
.
<p><img src="train.jpg" alt="foo bar" title="train &amp; tracks" /></p>

![foo *bar*][foobar]

[FOOBAR]: train.jpg "train & tracks"
.
<p><img src="train.jpg" alt="foo bar" title="train &amp; tracks" /></p>

![foo](train.jpg)
.
<p><img src="train.jpg" alt="foo" /></p>

My ![foo bar](/path/to/train.jpg  "title"   )
.
<p>My <img src="/path/to/train.jpg" alt="foo bar" title="title" /></p>

![foo](<url>)
.
<p><img src="url" alt="foo" /></p>

![](/url)
.
<p><img src="/url" alt="" /></p>

Reference-style:

![foo][bar]

[bar]: /url
.
<p><img src="/url" alt="foo" /></p>

![foo][bar]

[BAR]: /url
.
<p><img src="/url" alt="foo" /></p>

Collapsed:

![foo][]

[foo]: /url "title"
.
<p><img src="/url" alt="foo" title="title" /></p>

![*foo* bar][]

[*foo* bar]: /url "title"
.
<p><img src="/url" alt="foo bar" title="title" /></p>

The labels are case-insensitive:

![Foo][]

[foo]: /url "title"
.
<p><img src="/url" alt="Foo" title="title" /></p>

As with reference links, [whitespace] is not allowed between the two sets of brackets:

![foo] 
[]

[foo]: /url "title"
.
<p><img src="/url" alt="foo" title="title" />
[]</p>

Shortcut:

![foo]

[foo]: /url "title"
.
<p><img src="/url" alt="foo" title="title" /></p>

![*foo* bar]

[*foo* bar]: /url "title"
.
<p><img src="/url" alt="foo bar" title="title" /></p>

Note that link labels cannot contain unescaped brackets:

![[foo]]

[[foo]]: /url "title"
.
<p>![[foo]]</p>
<p>[[foo]]: /url &quot;title&quot;</p>

The link labels are case-insensitive:

![Foo]

[foo]: /url "title"
.
<p><img src="/url" alt="Foo" title="title" /></p>

If you just want a literal ! followed by bracketed text, you can backslash-escape the opening [:

!\[foo]

[foo]: /url "title"
.
<p>![foo]</p>

If you want a link after a literal !, backslash-escape the !:

\![foo]

[foo]: /url "title"
.
<p>!<a href="/url" title="title">foo</a></p>

OEmbed (extension)

UFM adds the oembed extension, which allows you to embed content from some websites into your documentation.

Using this extension, you can embed content from the following sites:

23hq
500px
Animoto
Aol
App.net
Bambuser
Bandcamp
Blip.tv
Cacoo
CanalPlus
Chirb.it
CircuitLab
Clikthrough
Codepen
CollegeHumor
Coub
CrowdRanking
DailyMile
Dailymotion
Deviantart
Dipity
DocumentCloud
Dotsub
Edocr
Flickr
FunnyOrDie
Gist
Gmep
HowCast
Huffduffer
Hulu
Ifixit
Ifttt
Imgur
Instagram
Jest
Justin
Kickstarter
Meetup
Mixcloud
Mobypicture
Nfb
Official.fm
ProductHunt
Polldaddy
PollEverywhere
Prezi
Qik
Rdio
Revision3
Roomshare
Sapo
Screenr
Scribd
Shoudio
Sketchfab
SildeShare
SoundCloud
SpeakerDeck
Spotify
TED
Twitter
Ustream
Vhx
Viddl
Videojug
Vimeo
Vine
Wistia
WordPress
Yfrog
YouTube
Facebook Video

The syntax is the same you'd use for an image, but instead of providing the URL to an image, you provide the URL to the embeddable content.

Here are some examples:

![YouTube Video Example](https://youtube.com/watch?v=dQw4w9WgXcQ)

<iframe src="https://youtube.com/embed/dQw4w9WgXcQ"></iframe>

![GitHub Gist Example](https://gist.github.com/m1guelpf/0a6d0853cff77e77356e6b9b9e52a41d)

<script src="https://gist.github.com/m1guelpf/0a6d0853cff77e77356e6b9b9e52a41d.js"></script>

Autolinks

Autolinks are absolute URIs and email addresses inside < and >. They are parsed as links, with the URL or email address as the link label.

A URI autolink consists of <, followed by an [absolute URI] not containing <, followed by >. It is parsed as a link to the URI, with the URI as the link's label.

An absolute URI, for these purposes, consists of a [scheme] followed by a colon (:) followed by zero or more characters other than ASCII [whitespace] and control characters, <, and >. If the URI includes these characters, they must be percent-encoded (e.g. %20 for a space).

For purposes of this spec, a scheme is any sequence of 2--32 characters beginning with an ASCII letter and followed by any combination of ASCII letters, digits, or the symbols plus ("+"), period ("."), or hyphen ("-").

Here are some valid autolinks:

<http://foo.bar.baz>
.
<p><a href="http://foo.bar.baz">http://foo.bar.baz</a></p>

<http://foo.bar.baz/test?q=hello&id=22&boolean>
.
<p><a href="http://foo.bar.baz/test?q=hello&amp;id=22&amp;boolean">http://foo.bar.baz/test?q=hello&amp;id=22&amp;boolean</a></p>

<irc://foo.bar:2233/baz>
.
<p><a href="irc://foo.bar:2233/baz">irc://foo.bar:2233/baz</a></p>

Uppercase is also fine:

<MAILTO:FOO@BAR.BAZ>
.
<p><a href="MAILTO:FOO@BAR.BAZ">MAILTO:FOO@BAR.BAZ</a></p>

Note that many strings that count as [absolute URIs] for purposes of this spec are not valid URIs, because their schemes are not registered or because of other problems with their syntax:

<a+b+c:d>
.
<p><a href="a+b+c:d">a+b+c:d</a></p>

<made-up-scheme://foo,bar>
.
<p><a href="made-up-scheme://foo,bar">made-up-scheme://foo,bar</a></p>

<http://../>
.
<p><a href="http://../">http://../</a></p>

<localhost:5001/foo>
.
<p><a href="localhost:5001/foo">localhost:5001/foo</a></p>

Spaces are not allowed in autolinks:

<http://foo.bar/baz bim>
.
<p>&lt;http://foo.bar/baz bim&gt;</p>

Backslash-escapes do not work inside autolinks:

<http://example.com/\[\>
.
<p><a href="http://example.com/%5C%5B%5C">http://example.com/\[\</a></p>

An email autolink consists of <, followed by an [email address], followed by >. The link's label is the email address, and the URL is mailto: followed by the email address.

An email address, for these purposes, is anything that matches the non-normative regex from the HTML5 spec:

/^[a-zA-Z0-9.!#$%&'*+/=?^_`{|}~-]+@[a-zA-Z0-9](?:[a-zA-Z0-9-]{0,61}[a-zA-Z0-9])?
(?:\.[a-zA-Z0-9](?:[a-zA-Z0-9-]{0,61}[a-zA-Z0-9])?)*$/

Examples of email autolinks:

<foo@bar.example.com>
.
<p><a href="mailto:foo@bar.example.com">foo@bar.example.com</a></p>

<foo+special@Bar.baz-bar0.com>
.
<p><a href="mailto:foo+special@Bar.baz-bar0.com">foo+special@Bar.baz-bar0.com</a></p>

Backslash-escapes do not work inside email autolinks:

<foo\+@bar.example.com>
.
<p>&lt;foo+@bar.example.com&gt;</p>

These are not autolinks:

<>
.
<p>&lt;&gt;</p>

< http://foo.bar >
.
<p>&lt; http://foo.bar &gt;</p>

<m:abc>
.
<p>&lt;m:abc&gt;</p>

<foo.bar.baz>
.
<p>&lt;foo.bar.baz&gt;</p>

http://example.com
.
<p>http://example.com</p>

foo@bar.example.com
.
<p>foo@bar.example.com</p>

Raw HTML

Text between < and > that looks like an HTML tag is parsed as a raw HTML tag and will be escaped with the exception of HTML comments.

Here is the grammar for tags:

A tag name consists of an ASCII letter followed by zero or more ASCII letters, digits, or hyphens (-).

An attribute consists of [whitespace], an [attribute name], and an optional [attribute value specification].

An attribute name consists of an ASCII letter, _, or :, followed by zero or more ASCII letters, digits, _, ., :, or -. (Note: This is the XML specification restricted to ASCII. HTML5 is laxer.)

An attribute value specification consists of optional [whitespace], a = character, optional [whitespace], and an [attribute value].

An attribute value consists of an [unquoted attribute value], a [single-quoted attribute value], or a [double-quoted attribute value].

An unquoted attribute value is a nonempty string of characters not including spaces, ", ', =, <, >, or `.

A single-quoted attribute value consists of ', zero or more characters not including ', and a final '.

A double-quoted attribute value consists of ", zero or more characters not including ", and a final ".

An open tag consists of a < character, a [tag name], zero or more [attributes], optional [whitespace], an optional / character, and a > character.

A closing tag consists of the string </, a [tag name], optional [whitespace], and the character >.

An HTML comment consists of , where text does not start with > or ->, does not end with -, and does not contain --. (See the HTML5 spec.)

A processing instruction consists of the string <?, a string of characters not including the string ?>, and the string ?>.

A declaration consists of the string <!, a name consisting of one or more uppercase ASCII letters, [whitespace], a string of characters not including the character >, and the character >.

A CDATA section consists of the string <![CDATA[, a string of characters not including the string ]]>, and the string ]]>.

An HTML tag consists of an [open tag], a [closing tag], an [HTML comment], a [processing instruction], a [declaration], or a [CDATA section].

Here are some simple open tags:

<a><bab><c2c>
.
<p>&lt;a&gt;&lt;bab&gt;&lt;c2c&gt;</p>

Empty elements:

<a/><b2/>
.
<p>&lt;a/&gt;&lt;b2/&gt;</p>

[Whitespace] is allowed:

<a  /><b2
data="foo" >
.
<p>&lt;a  /&gt;&lt;b2
data=&quot;foo&quot; &gt;</p>

With attributes:

<a foo="bar" bam = 'baz <em>"</em>'
_boolean zoop:33=zoop:33 />
.
<p>&lt;a foo=&quot;bar&quot; bam = 'baz &lt;em&gt;&quot;&lt;/em&gt;'
_boolean zoop:33=zoop:33 /&gt;</p>

Custom tag names can be used:

Foo <responsive-image src="foo.jpg" />
.
<p>Foo &lt;responsive-image src=&quot;foo.jpg&quot; /&gt;</p>

Illegal tag names, not parsed as HTML:

<33> <__>
.
<p>&lt;33&gt; &lt;__&gt;</p>

Illegal attribute names:

<a h*#ref="hi">
.
<p>&lt;a h*#ref=&quot;hi&quot;&gt;</p>

Illegal attribute values:

<a href="hi'> <a href=hi'>
.
<p>&lt;a href=&quot;hi'&gt; &lt;a href=hi'&gt;</p>

Illegal [whitespace]:

< a><
foo><bar/ >
.
<p>&lt; a&gt;&lt;
foo&gt;&lt;bar/ &gt;</p>

Missing [whitespace]:

<a href='bar'title=title>
.
<p>&lt;a href='bar'title=title&gt;</p>

Closing tags:

</a></foo >
.
<p>&lt;/a&gt;&lt;/foo &gt;</p>

Illegal attributes in closing tag:

</a href="foo">
.
<p>&lt;/a href=&quot;foo&quot;&gt;</p>

Comments:

foo <!-- this is a
comment - with hyphen -->
.
<p>foo <!-- this is a
comment - with hyphen --></p>

foo <!-- not a comment -- two hyphens -->
.
<p>foo &lt;!-- not a comment -- two hyphens --&gt;</p>

Not comments:

foo <!--> foo -->

foo <!-- foo--->
.
<p>foo &lt;!--&gt; foo --&gt;</p>
<p>foo &lt;!-- foo---&gt;</p>

Processing instructions:

foo <?php echo $a; ?>
.
<p>foo &lt;?php echo $a; ?&gt;</p>

Declarations:

foo <!ELEMENT br EMPTY>
.
<p>foo &lt;!ELEMENT br EMPTY&gt;</p>

CDATA sections:

foo <![CDATA[>&<]]>
.
<p>foo &lt;![CDATA[&gt;&amp;&lt;]]&gt;</p>

Entity and numeric character references are preserved in HTML attributes:

foo <a href="&ouml;">
.
<p>foo &lt;a href=&quot;&amp;ouml;&quot;&gt;</p>

Backslash escapes do not work in HTML attributes:

foo <a href="\*">
.
<p>foo &lt;a href=&quot;\*&quot;&gt;</p>

<a href="\"">
.
<p>&lt;a href=&quot;&quot;&quot;&gt;</p>

Hard line breaks

A line break (not in a code span or HTML tag) that is preceded by two or more spaces and does not occur at the end of a block is parsed as a hard line break (rendered in HTML as a <br /> tag):

foo  
baz
.
<p>foo<br />
baz</p>

For a more visible alternative, a backslash before the [line ending] may be used instead of two spaces:

foo\
baz
.
<p>foo<br />
baz</p>

More than two spaces can be used:

foo       
baz
.
<p>foo<br />
baz</p>

Leading spaces at the beginning of the next line are ignored:

foo  
     bar
.
<p>foo<br />
bar</p>

foo\
     bar
.
<p>foo<br />
bar</p>

Line breaks can occur inside emphasis, links, and other constructs that allow inline content:

*foo  
bar*
.
<p><em>foo<br />
bar</em></p>

*foo\
bar*
.
<p><em>foo<br />
bar</em></p>

Line breaks do not occur inside code spans

`code  
span`
.
<p><code>code span</code></p>

`code\
span`
.
<p><code>code\ span</code></p>

or HTML tags:

<a href="foo  
bar">
.
<p>&lt;a href=&quot;foo  
bar&quot;&gt;</p>

<a href="foo\
bar">
.
<p>&lt;a href=&quot;foo\
bar&quot;&gt;</p>

Hard line breaks are for separating inline content within a block. Neither syntax for hard line breaks works at the end of a paragraph or other block element:

foo\
.
<p>foo\</p>

foo  
.
<p>foo</p>

### foo\
.
<h3>foo\</h3>

### foo  
.
<h3>foo</h3>

Soft line breaks

A regular line break (not in a code span or HTML tag) that is not preceded by two or more spaces or a backslash is parsed as a softbreak. (A softbreak may be rendered in HTML either as a [line ending] or as a space. The result will be the same in browsers. In the examples here, a [line ending] will be used.)

foo
baz
.
<p>foo
baz</p>

Spaces at the end of the line and beginning of the next line are removed:

foo 
 baz
.
<p>foo
baz</p>

A conforming parser may render a soft line break in HTML either as a line break or as a space.

A renderer may also provide an option to render soft line breaks as hard line breaks.

Textual content

Any characters not given an interpretation by the above rules will be parsed as plain textual content.

hello $.;'there
.
<p>hello $.;'there</p>

Foo χρῆν
.
<p>Foo χρῆν</p>

Internal spaces are preserved verbatim:

Multiple     spaces
.
<p>Multiple     spaces</p>

Files

spec.md

Latest commit

History

spec.md

File metadata and controls

Introduction

What is UnMarkDocs Flavored Markdown?

What is Markdown?

Why is a spec needed?

About this document

About the examples on this document

Preliminaries

Characters and lines

Tabs

Insecure characters

Blocks and inlines

Precedence

Container blocks and leaf blocks

Leaf blocks

Thematic breaks

ATX headings

Setext headings

Indented code blocks

Fenced code blocks

HTML blocks

Link reference definitions

Paragraphs

Blank lines

Tables (extension)

Alerts (extension)

Container blocks

Block quotes

List items

Motivation

Lists

Inlines

Abbreviations (extension)

Backslash escapes

Entity and numeric character references

Code spans

Emojis (extension)

Emphasis and strong emphasis

Strikethrough (extension)

Links

Link Generation (extension)

Images

OEmbed (extension)

Autolinks

Raw HTML

Hard line breaks

Soft line breaks

Textual content