Skip to content

de_Fuse ZIP v0.4

Pre-release
Pre-release
Compare
Choose a tag to compare
@shinyquagsire23 shinyquagsire23 released this 30 Apr 22:49
· 10 commits to main since this release
v0.4
489a877

What's New?

  • Added TV display output for the menu.
  • Added option in Backup and Restore to change the SEEPROM SATA drive type.
  • Added support for using the serial console for Power/Eject prompts.
  • The Konami code is now required for SEEPROM restores.
  • Fixed a bug where if SMC is held in reset (or is otherwise unresponsive somehow) it will no longer spam the menu with fake button presses.
  • Improved serial scrollback.
  • Misc reliability improvements.

INSTALLATION INSTRUCTIONS

This is an initial release for early adopters who want to know if their RPi Pico is wired correctly for de_Fuse. A lot of stuff currently is not implemented and/or needs improvements. However, what is provided is enough to verify that the Pico is installed correctly.

REQUIRED FILES

boot1.img -- SD card image for minute_minute
fw.img -- Main bootloader, minute
ios.patch -- de_Fuse_iosuhax patch for 5.5.1ish, I think technically it will work on 5.5.5 though?
otp.bin -- This can be dumped via the minute menu, under
Backup and Restore > Dump OTP via PRSHhax.
The menu will still be available if otp.bin is not present,
however IOS will not be able to boot.

The following versions are provided in the zip:

STEPS

  1. Flash pico_defuse.uf2 to the Raspberry Pi Pico via USB. This can be done by copying the file to the USB Mass Storage device that appears.

  2. Flash boot1.img to a 1GB SD card. Some 2GB cards may work, but 1GB seems to be the sweet spot--it just has to be non-SDHC. boot1.img includes an MBR header, so you may have to format the FAT32 partition after flashing in order to continue. Flashing can be done via win32diskimager, dd, or any other SD card formatter.

  3. Copy fw.img, ios.patch and otp.bin to the root of the SD card. If you do not have otp.bin, it can be dumped via Backup and Restore > Dump OTP via PRSHhax.

  4. Power on the Wii U console. If it is working correctly, the power LED will flash and turn purple. By default, the minute menu will appear on the serial console, however an INI file can be placed on the SD card to trigger autobooting.

ACCESSING THE MINUTE MENU

A serial console is required to operate the menu, for now. On Windows you can use PuTTY, on Linux/macOS you can use minicom (eg minicom -b 115200 -o -D /dev/cu.usbmodem11101).

minute can be configured to autoboot into IOS via sdmc:/minute/minute.ini. To trigger the menu manually, press (but do not hold) the power button 3-5 times (like you're trying to get into the BIOS on a computer), or until the menu shows up on the serial console. From here you can swap the SD card and make NAND backups. To back up MLC, it is currently recommended to Format redNAND with a 64GB SD card, and then copy the partitions off the SD card.

An example of an autoboot minute.ini is as follows:

[boot]
autoboot = 1
autoboot_timeout = 3

RESTORING NAND BACKUPS

minute now supports restoring NAND backups, however there still may be some lingering bugs. AS LONG AS YOU HAVE A KNOWN-GOOD SLC.RAW and SLCCMPT.RAW BACKED UP SOMEWHERE SAFE, YOU WILL BE FINE!! I managed to completely wipe my SLCCMPT and restore it, but I also had one restore where some sectors didn't program for some reason. It could have just been my SD card though.

I plan on continuing to work on this, since I also want to recover a unit which has had its NAND entirely wiped with no backups. However, the current state of things is as I said.

A corrupt NAND will look as follows in IOSU logs:

  • "Attached volume to slc01 (raw)"
  • "Attached volume to slccmpt01 (raw)"
  • A ton of spam about bad hashes (this also happens if otp.bin is invalid or zeroed).

TROUBLESHOOTING

You will want a serial console connected for this, see above for help.

If the console LED stays red after pressing the power button, and then boots normally after ~30s, this means that either de_Fuse failed to detect success, or the SD card was invalid.

A successful de_Fuse looks like this:

[pico] Changed state: WIIU_STATE_POWERED_OFF -> WIIU_STATE_NEEDS_DEFUSE
Starting... 1152
Results:
Winner! 0xfb80
01
02
03
04
05
08
09
0a
0b
0c
0d
0e
13
14
15
18
1b
1c
1d
1e
1f
25
88
89
8a
...
  • If the initial lines are not 01, 02, 03, ..., this means the DEBUG GPIOs are not wired correctly.
  • If the final line is 0x1E and the error code is 0x00, that is an invalid SD card. Invalid SD cards seem to hang boot0.
  • If the final line is 0x25, and 1e and 1f are in the output, this means the SD card was valid, but not flashed correctly (or otherwise failed to read).
  • If the final line is 0x25, and 1e and 1f are NOT in the output, this means that the EXI CLK wire is not connected correctly, or there is an issue with the EXI data wire.
Assets 3
Loading