mod_authg_jwt

Authentication module for Apache to verify JWT of Google OAuth2 or any other OIDC/oAuth2 compliant Identity Provider (Supports only RS256 / RS512).

Verify JWT token and reject requests with invalid tokens with 401. If it gets a JWT signed by an unknown key ID, then the mod will request the key from the identity provider / AuthServer. (Cool down of 60 seconds).

Supports server endpoints

• providing signing keys based on the jku JWT header or a known, fixed url.
• providing keys in pem format (certificate or public key) as well as JWKS format

Simple setup

The following configuration is due in the apache main configuration (e.g. apache2.conf, httpd.conf or similar, e.g. /etc/apache2/apache2.conf).

Module loading:

LoadModule authg_jwt_module modules/mod_authg_jwt.so

Configuring the module:

    AuthClientID ***.apps.googleusercontent.com
    AuthIssuer accounts.google.com
    AuthServer https://www.googleapis.com/oauth2/v1/certs
    AuthServerUseJku false
    AuthServerTrustedHosts hostname1, hostname2, hostnameN
    AuthServerAllowInsecureJku false
    AuthServerKeyFormat cert
    UserClaim email
    MinKeyRefreshWait 30
    CleanKeyCacheSeconds 3600

    <Location /api/>
        AuthType JWT
        Require valid-user
    </Location>

Where the configuration options are:

• AuthClientID: The audience (aud) claim expected to be present during JWT validation. Ignored when not set.
• AuthIssuer: The issuer (iss) claim expected to be present during JWT validation. Ignored when not set.
• AuthServer: The url from where the public signing keys required for signature validation are loaded from. See also AuthServerUseJku.
• AuthServerUseJku: Set this to true when using the JWT jku header value as url to get the public signing keys. The AuthServer url is then only used as fallback when receiving a JWT without jku header. Defaults to false.
• AuthServerTrustedHosts: Only required when using jku. Lists the hosts trusted to provide public signing keys. Comma sparated list (without spaces!). Attention: Ignored when not set! Make sure this is no security issue in your case.
• AuthServerAllowInsecureJku: For test environments only. Allows jku using insecure http urls. Does not do hostcheck of jku when no hosts are configured. Defaults to false.
• AuthServerKeyFormat: The format how the AuthServer provides the signing keys. Options: jwk (server provides a JWK Set), cert (Server provides certificates or public key PEMs). Defaults to cert.
• UserClaim: The claim containing the identity of the user. Typical options are email, sub. Defaults to email.
• MinKeyRefreshWait: Requests the jku or AuthServer url only when there was no call for the last MinKeyRefreshWait seconds. Defaults to 60. Set to 0 to always query when the key was not found in the local cache.
• CleanKeyCacheSeconds: Cleans the key-cache every key_cache_clean_seconds seconds. This is to make sure keys no longer trusted are eventually forgotten by the MOD and that we do not cache long expired keys and still accept them. Defaults to 14400 (=4 hours). Do not set to 0, as this would likely kill apache when having to query the keys each and every time from the server.

Note to enable this mod for your location, AuthType JWT must be configured.

Note also: You will have to restart apache after configuration.

Build on host (for Ubuntu, GNU Linux, etc)

Prepare environment:

sudo apt install build-essential cmake apache2-dev libcurl4-openssl-dev clang-format

Get sources:

git clone [email protected]:akuskis/mod_authg_jwt.git
cd mod_authg_jwt
git submodule update --init --recursive

Build sources:

mkdir build && cd build
cmake .. && make mod_authg_jwt

Potentially helpful commands for Ubuntu and similar

To restart apache

sudo systemctl restart apache2

If this leads to errors use the commands printed in the error message to get more details.

log location of apache

/var/log/apache2/*

Build on host (for Red Hat Enterprise Linux)

Prepare for git

sudo yum install git

Get sources and sub-modules from git

git clone https://github.com/akuskis/mod_authg_jwt.git
cd mod_authg_jwt
git submodule update --init --recursive

prepare environemnt

Install cmake:

sudo yum install cmake

Note if you have an old cmake version in your distribution you will have to manually install cmake 3.16. or higher.

sudo yum remove cmake
cd /opt
sudo wget https://github.com/Kitware/CMake/releases/download/v3.21.4/cmake-3.21.4-linux-x86_64.sh
sudo sh ./cmake-3.21.4-linux-x86_64.sh
sudo ln -s /opt/cmake-3.21.4-linux-x86_64/bin/* /usr/local/bin
sudo ln -s /opt/cmake-3.21.4-linux-x86_64/bin/* /usr/bin
cmake -version

Install development dependencies: This requires you to have a gcc compiler that supports C++ 17 features. If you are still on RHEL 7.x or below you will for sure require the RedHat devtool-chain. This requires you to have a (free for individuals) RedHat subscription. (Note if you have a new RHEL-Version it might be sufficient to install "sudo yum groupinstall 'Development Tools'" instead of the toolchain. Check your gcc version.)

Here you can register for the RedHat developer program: https://developers.redhat.com/register . Then you can see how to use the developer toolset: https://access.redhat.com/solutions/472793 See how to get your system registered: https://access.redhat.com/documentation/en-us/red_hat_subscription_management/1/html/quick_registration_for_rhel/index . For me this was simply "sudo subscription-manager register". Then assign a subscription: https://access.redhat.com/solutions/776723 And add the repositories required: https://access.redhat.com/documentation/en-us/red_hat_developer_toolset/11/html/user_guide/chap-red_hat_developer_toolset#sect-Red_Hat_Developer_Toolset-Subscribe-RHSCL . For me this was "sudo subscription-manager repos --enable rhel-7-server-optional-rpms", "sudo subscription-manager repos --enable rhel-7-server-optional-debug-rpms" and "sudo subscription-manager repos --enable rhel-7-server-optional-source-rpms" and "subscription-manager repos --enable rhel-7-server-devtools-rpms"

and then you are finaly ready to install

sudo yum install devtoolset-11
sudo yum install httpd-devel
sudo yum install openssl-devel libcurl-devel.x86_64
sudo yum install llvm-toolset-12.0
yum install llvm-toolset-12.0-clang-tools-extra

to make cmake happy, make sure there exists an apxs2. If it does not, execute the following:

sudo cp /usr/bin/apxs /usr/sbin/apxs2

Build sources

If you installed the devtoolset, make sure you enable it for the following by executing

sudo scl enable devtoolset-11 'bash'

change to the source directory (.../mod_authg_jwt) and create the build folder:

mkdir build && cd build

Now compile: If you are on the devtoolset compile like this:

export CC=/opt/rh/devtoolset-11/root/usr/bin/gcc 
export CXX=/opt/rh/devtoolset-11/root/usr/bin/g++
cmake .. && make mod_authg_jwt

if you are on the standard gcc you may simpliy use:

cmake .. && make mod_authg_jwt

Before check-in/commit, make sure you run the code formatter:

cd ..
scl enable llvm-toolset-12.0 'clang-format -i src/*.h'
scl enable llvm-toolset-12.0 'clang-format -i src/*.hpp'
scl enable llvm-toolset-12.0 'clang-format -i src/*.c'
scl enable llvm-toolset-12.0 'clang-format -i src/*.cpp'

Now configure apache and restart it.

Potentially helpful commands on RHEL

To restart apache

sudo systemctl restart httpd.service

If this leads to errors use the commands printed in the error message to get more details.

If you have permission issues

a) check the permissions on libmod_authg_jwt.so -> should be execute and read for the apache user. Try it out with:

sudo chmod 777 libmod_authg_jwt.so 

if this was the case carefully decide what the right permissions are an set them

b) check if your RHEL still uses SELinux and temporary disable it:

sudo setenforce 0

if this was the case carefully decide what to set in SELinux or if you can disable it.

log location of apache

/var/log/httpd/*

Build release in Docker

Get sources as it was described before and run the following (Docker should be installed):

docker build -t mod_authg_jwt .
docker create --name mod_authg_jwt mod_authg_jwt
docker cp mod_authg_jwt:/app/build/src/libmod_authg_jwt.so .
docker rm -f mod_authg_jwt

License

This project is licensed under the GPLv3 License - see the LICENSE file for details