6dofimu16

\mainpage Main Page

---

6DOF IMU 16 Click

6DOF IMU 16 Click is a compact add-on board with a 6-axis inertial measurement device. This board features the ICM-42605, a premium performance 6-axis MotionTracking™ IMU from TDK InvenSense. It combines a 3-axis gyroscope and a 3-axis accelerometer, supporting the lowest gyroscope and accelerometer sensor noise in this IMU class. It also has the highest stability against temperature, shock, SMT/bend-induced offset, and more.

Click Product page

---

Click library

• Author : Stefan Ilic
• Date : Dec 2023.
• Type : I2C/SPI type

Software Support

We provide a library for the 6DOF IMU 16 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

This library contains API for 6DOF IMU 16 Click driver.

Standard key functions :

• c6dofimu16_cfg_setup Config Object Initialization function.

void c6dofimu16_cfg_setup ( c6dofimu16_cfg_t *cfg );

• c6dofimu16_init Initialization function.

err_t c6dofimu16_init ( c6dofimu16_t *ctx, c6dofimu16_cfg_t *cfg );

• c6dofimu16_default_cfg Click Default Configuration function.

err_t c6dofimu16_default_cfg ( c6dofimu16_t *ctx );

Example key functions :

• c6dofimu16_sw_reset This function performs the device software reset.

err_t c6dofimu16_sw_reset ( c6dofimu16_t *ctx );

• c6dofimu16_get_gyro_data This function reads the angular rate of X, Y, and Z axis in degrees per second (mdps).

err_t c6dofimu16_get_gyro_data ( c6dofimu16_t *ctx, c6dofimu16_axis_t *gyro_data );

• c6dofimu16_get_accel_data This function reads the accelerometer of X, Y, and Z axis relative to standard gravity (mg).

err_t c6dofimu16_get_accel_data ( c6dofimu16_t *ctx, c6dofimu16_axis_t *accel_data );

Example Description

This example demonstrates the use of 6DOF IMU 16 Click board by reading and displaying the accelerometer and gyroscope data (X, Y, and Z axis).

The demo application is composed of two sections :

Application Init

Initializes the driver performs the Click default configuration, and checks communication by reading device ID.

void application_init ( void )
{
    log_cfg_t log_cfg;  /**< Logger config object. */
    c6dofimu16_cfg_t c6dofimu16_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    c6dofimu16_cfg_setup( &c6dofimu16_cfg );
    C6DOFIMU16_MAP_MIKROBUS( c6dofimu16_cfg, MIKROBUS_1 );
    err_t init_flag = c6dofimu16_init( &c6dofimu16, &c6dofimu16_cfg );
    if ( ( I2C_MASTER_ERROR == init_flag ) || ( SPI_MASTER_ERROR == init_flag ) )
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( C6DOFIMU16_ERROR == c6dofimu16_default_cfg ( &c6dofimu16 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }

    uint8_t dev_id = 0;
    c6dofimu16_reg_read( &c6dofimu16, C6DOFIMU16_REG_WHO_AM_I, &dev_id );
    if ( C6DOFIMU16_DEVICE_ID != dev_id )
    {
        log_error( &logger, " Communication error " );
        for ( ; ; );
    }
    log_printf( &logger, " Device ID: 0x%.2X \r\n", ( uint16_t ) dev_id );

    
    log_info( &logger, " Application Task " );
}

Application Task

Reading the accelerometer and gyroscope measurements, results are displayed on the USB UART every second.

void application_task ( void )
{
    c6dofimu16_axis_t accel_data;
    c6dofimu16_axis_t gyro_data;

    c6dofimu16_get_accel_data( &c6dofimu16, &accel_data );
    c6dofimu16_get_gyro_data( &c6dofimu16, &gyro_data );
    log_printf( &logger, " Accel data | Gyro data \r\n" );
    log_printf( &logger, " X: %.2f g  | %.2f dps \r\n", accel_data.x_data, gyro_data.x_data );
    log_printf( &logger, " Y: %.2f g  | %.2f dps \r\n", accel_data.y_data, gyro_data.y_data );
    log_printf( &logger, " Z: %.2f g  | %.2f dps \r\n", accel_data.z_data, gyro_data.z_data );
    Delay_ms ( 1000 );
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.C6DOFIMU16

Additional notes and informations

Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---