# logread
Jan 1 00:00:21 ralink user.info kernel: PPP generic driver version 2.4.2
Jan 1 00:00:21 ralink user.info kernel: PPP Deflate Compression module registered
Jan 1 00:00:21 ralink user.info kernel: PPP BSD Compression module registered
Jan 1 00:00:21 ralink user.info kernel: PPP MPPE Compression module registered
Jan 1 00:00:21 ralink user.info kernel: NET: Registered protocol family 24
Jan 1 00:00:21 ralink user.info kernel: PPPoL2TP kernel driver, V0.17
Jan 1 00:00:21 ralink user.info kernel: PPTP driver version 0.8.1
Jan 1 00:00:21 ralink user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jan 1 00:00:21 ralink user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Jan 1 00:00:21 ralink user.info kernel: block2mtd: version $Revision: 1.1.1.1 $
Jan 1 00:00:21 ralink user.warn kernel: GACT probability on
Jan 1 00:00:21 ralink user.warn kernel: Mirror/redirect action on
Jan 1 00:00:21 ralink user.warn kernel: Simple TC action Loaded
Jan 1 00:00:21 ralink user.warn kernel: u32 classifier
Jan 1 00:00:21 ralink user.warn kernel: Performance counters on
Jan 1 00:00:21 ralink user.warn kernel: input device check on
Jan 1 00:00:21 ralink user.warn kernel: Actions configured
Jan 1 00:00:21 ralink user.warn kernel: nf_conntrack version 0.5.0 (128 buckets, 1024 max)
Jan 1 00:00:21 ralink user.warn kernel: ip_tables: (C) 2000-2006 Netfilter
Jan 1 00:00:21 ralink user.info kernel: Core Team, Type=Linux
Jan 1 00:00:21 ralink user.warn kernel: ipt_time loading
Jan 1 00:00:21 ralink user.warn kernel: arp_tables: (C) 2002 David S. Miller
Jan 1 00:00:21 ralink user.info kernel: TCP cubic registered
Jan 1 00:00:21 ralink user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:21 ralink user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:21 ralink user.notice kernel: Ebtables v2.0 registered
Jan 1 00:00:21 ralink user.info kernel: 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
Jan 1 00:00:21 ralink user.info kernel: All bugs added by David S. Miller <[email protected]>
Jan 1 00:00:21 ralink user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 00:00:21 ralink user.info kernel: Freeing unused kernel memory: 108k freed
Jan 1 00:00:21 ralink user.warn kernel: Warning: unable to open an initial console.
Jan 1 00:00:21 ralink user.warn kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan 1 00:00:21 ralink user.err kernel: devpts: called with bogus options
Jan 1 00:00:21 ralink user.warn kernel: baud 9600^M
Jan 1 00:00:21 ralink user.warn kernel: xxxxx:-2144892024 9600 260 baud 57600^M
Jan 1 00:00:21 ralink user.warn kernel: xxxxx:-2144892024 57600 43 <4>rt2860v2_ap: module license 'unspecified' taints kernel.
Jan 1 00:00:21 ralink user.warn kernel:
Jan 1 00:00:21 ralink user.warn kernel:
Jan 1 00:00:21 ralink user.warn kernel: === pAd = c0083000, size = 805120 ===
Jan 1 00:00:21 ralink user.warn kernel:
Jan 1 00:00:21 ralink user.warn kernel: <-- RTMPAllocAdapterBlock, Status=0
Jan 1 00:00:21 ralink user.warn kernel: RX DESC a067f000 size = 2048
Jan 1 00:00:21 ralink user.warn kernel: <-- RTMPAllocTxRxRingMemory, Status=0
Jan 1 00:00:21 ralink user.warn kernel: Key1Str is Invalid key length(0) or Type(0)
Jan 1 00:00:21 ralink user.warn kernel: Key2Str is Invalid key length(0) or Type(0)
Jan 1 00:00:21 ralink user.warn kernel: Key3Str is Invalid key length(0) or Type(0)
Jan 1 00:00:21 ralink user.warn kernel: Key4Str is Invalid key length(0) or Type(0)
Jan 1 00:00:21 ralink user.warn kernel: 1. Phy Mode = 9
Jan 1 00:00:21 ralink user.warn kernel: 2. Phy Mode = 9
Jan 1 00:00:21 ralink user.warn kernel: 3. Phy Mode = 9
Jan 1 00:00:21 ralink user.warn kernel: pAd->TxPowerCtrl.bInternalTxALC == FALSE !
Jan 1 00:00:21 ralink user.warn kernel: MCS Set = ff 00 00 00 01
Jan 1 00:00:21 ralink user.warn kernel: SYNC - BBP R4 to 20MHz.l
Jan 1 00:00:21 ralink user.warn kernel: SYNC - BBP R4 to 20MHz.l
Jan 1 00:00:21 ralink user.warn kernel: SYNC - BBP R4 to 20MHz.l
Jan 1 00:00:21 ralink user.warn kernel: SYNC - BBP R4 to 20MHz.l
Jan 1 00:00:21 ralink user.warn kernel: SYNC - BBP R4 to 20MHz.l
Jan 1 00:00:21 ralink user.warn kernel: SYNC - BBP R4 to 20MHz.l
Jan 1 00:00:21 ralink user.warn kernel: sdkjfsf 250^M
Jan 1 00:00:21 ralink user.notice kernel: ralink_gpio: sending a SIGUSR1 to process 599
Jan 1 00:00:21 ralink user.warn kernel: SYNC - BBP R4 to 20MHz.l
Jan 1 00:00:21 ralink user.warn kernel: SYNC - BBP R4 to 20MHz.l
Jan 1 00:00:21 ralink user.warn kernel: SYNC - BBP R4 to 20MHz.l
Jan 1 00:00:21 ralink user.warn kernel: SYNC - BBP R4 to 20MHz.l
Jan 1 00:00:21 ralink user.warn kernel: SYNC - BBP R4 to 20MHz.l
Jan 1 00:00:21 ralink user.warn kernel: SYNC - BBP R4 to 20MHz.l
Jan 1 00:00:21 ralink user.warn kernel: Main bssid = 44:33:4c:a4:05:02
Jan 1 00:00:21 ralink user.warn kernel: <==== rt28xx_init, Status=0
Jan 1 00:00:21 ralink user.warn kernel: 0x1300 = 00064380
Jan 1 00:00:21 ralink user.warn kernel:
Jan 1 00:00:21 ralink user.warn kernel: phy_tx_ring = 0x00405000, tx_ring = 0xa0405000
Jan 1 00:00:21 ralink user.warn kernel:
Jan 1 00:00:21 ralink user.warn kernel: phy_rx_ring0 = 0x00406000, rx_ring0 = 0xa0406000
Jan 1 00:00:21 ralink user.warn kernel: MAC_ADRH -- : 0x00004433
Jan 1 00:00:21 ralink user.warn kernel: MAC_ADRL -- : 0x4ca40502
Jan 1 00:00:21 ralink user.warn kernel: RT305x_ESW: Link Status Changed
Jan 1 00:00:21 ralink user.warn kernel: eth2.2: Setting MAC address to 44 33 4c a4 05 03.
Jan 1 00:00:21 ralink user.info kernel: device eth2 entered promiscuous mode
Jan 1 00:00:21 ralink user.warn kernel: VLAN (eth2.2): Setting underlying device (eth2) to promiscious mode.
Jan 1 00:00:21 ralink user.debug kernel: eth2.1: add 01:00:5e:00:00:01 mcast address to master interface
Jan 1 00:00:21 ralink user.debug kernel: eth2.2: add 01:00:5e:00:00:01 mcast address to master interface
Jan 1 00:00:21 ralink user.info kernel: device ra0 entered promiscuous mode
Jan 1 00:00:21 ralink user.info kernel: eth2.1: dev_set_promiscuity(master, 1)
Jan 1 00:00:21 ralink user.info kernel: device eth2.1 entered promiscuous mode
Jan 1 00:00:21 ralink user.info kernel: br0: port 2(eth2.1) entering learning state
Jan 1 00:00:21 ralink user.info kernel: br0: port 1(ra0) entering learning state
Jan 1 00:00:21 ralink user.warn kernel: RT305x_ESW: Link Status Changed
Jan 1 00:00:21 ralink user.info kernel: br0: topology change detected, propagating
Jan 1 00:00:21 ralink user.info kernel: br0: port 2(eth2.1) entering forwarding state
Jan 1 00:00:21 ralink user.info kernel: br0: topology change detected, propagating
Jan 1 00:00:21 ralink user.info kernel: br0: port 1(ra0) entering forwarding state
Jan 1 00:00:21 ralink user.warn kernel: RT305x_ESW: Link Status Changed
Jan 1 00:00:21 ralink user.warn kernel: RT305x_ESW: Link Status Changed
Jan 1 00:00:21 ralink user.warn kernel: switch register base addr to system register 0xb0000000
Jan 1 00:00:21 ralink user.warn kernel: write offset 0x60, value 0x400095
Jan 1 00:00:22 ralink user.warn kernel: baud 9600^M
Jan 1 00:00:22 ralink user.warn kernel: c_cflag (00000cbd)(1)^M
Jan 1 00:00:22 ralink user.warn kernel: c_cflag (000000ba)(0)^M
Jan 1 00:00:22 ralink user.warn kernel: c_cflag (00000001)(0)^M
Jan 1 00:00:22 ralink user.warn kernel: xxxxx:-2144891844 9600 260
Jan 1 00:00:22 ralink user.info kernel: baud 115200^M
Jan 1 00:00:22 ralink user.warn kernel: c_cflag (000018b2)(1)^M
Jan 1 00:00:22 ralink user.warn kernel: c_cflag (000000ba)(0)^M
Jan 1 00:00:22 ralink user.warn kernel: c_cflag (00000000)(0)^M
Jan 1 00:00:22 ralink user.warn kernel: xxxxx:-2144891844 115200 21
Jan 1 00:00:41 ralink user.info kernel: sdkjfsf 250^M
Jan 1 00:00:41 ralink user.warn kernel: sdkjfsf 250^M
Jan 1 00:00:43 ralink user.warn kernel: sdkjfsf 250^M
Jan 1 00:00:43 ralink user.notice kernel: ralink_gpio: sending a SIGUSR1 to process 599
Jan 1 00:01:55 ralink auth.info login[1852]: root login on 'pts/0'
# cat /proc/mtd
dev: size erasesize name
mtd0: 00800000 00010000 "ALL"
mtd1: 00030000 00010000 "Bootloader"
mtd2: 00010000 00010000 "Config"
mtd3: 00010000 00010000 "Factory"
mtd4: 000c11eb 00010000 "Kernel"
mtd5: 006eee15 00010000 "RootFS"
mtd6: 007b0000 00010000 "Kernel_RootFS"
# busybox
BusyBox v1.12.1 (2013-03-07 10:08:05 HKT) multi-call binary
Copyright (C) 1998-2008 Erik Andersen, Rob Landley, Denys Vlasenko
and others. Licensed under GPLv2.
See source distribution for full notice.
Usage: busybox [function] [arguments]...
or: function [arguments]...
BusyBox is a multi-call binary that combines many common Unix
utilities into a single executable. Most people will create a
link to busybox for each function they wish to use and BusyBox
will act like whatever it was invoked as!
Currently defined functions:
[, [[, ash, basename, brctl, cat, chmod, chpasswd, cp, date, echo, expr, free, getty, grep, halt, hostname, ifconfig, init, init, insmod,
kill, killall, klogd, logger, login, logread, ls, lsmod, mdev, mkdir, mknod, mount, ping, ping6, poweroff, printf, ps, pwd, reboot,
rm, rmmod, route, sed, sh, sleep, syslogd, telnetd, test, tftp, top, touch, udhcpc, udhcpd, umount, uptime, vconfig, wc
# ifconfig
br0 Link encap:Ethernet HWaddr 44:33:4C:A4:05:02
inet addr:192.168.16.254 Bcast:192.168.16.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4165 errors:0 dropped:0 overruns:0 frame:0
TX packets:3279 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4947945 (4.7 MiB) TX bytes:535173 (522.6 KiB)
eth2 Link encap:Ethernet HWaddr 44:33:4C:A4:05:02
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:4170 errors:0 dropped:0 overruns:0 frame:0
TX packets:3465 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5023682 (4.7 MiB) TX bytes:658881 (643.4 KiB)
Interrupt:3
eth2.1 Link encap:Ethernet HWaddr 44:33:4C:A4:05:02
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4170 errors:0 dropped:0 overruns:0 frame:0
TX packets:3279 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4965302 (4.7 MiB) TX bytes:548289 (535.4 KiB)
eth2.2 Link encap:Ethernet HWaddr 44:33:4C:A4:05:03
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:186 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:110484 (107.8 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2255 (2.2 KiB) TX bytes:2255 (2.2 KiB)
# [TAB][TAB]
[ config-pppoe.sh hostname ls printf telnetd
[[ config-pptp.sh ifconfig lsmod ps test
accel-pptp.sh config-udhcpd.sh igmpproxy mdev pwd tftp
ash config-vlan.sh igmpproxy.sh mii_mgr ralink_init top
ated config.sh inadyn mkdir readme touch
autoconn3G.sh cp init mknod reboot udhcpc
automount.sh cpubusy.sh insmod mount reg udhcpc.sh
basename date internet.sh mtd_write rm udhcpd
brctl ddns.sh iptables nat.sh rmmod umount
busybox dnsmasq ipv6_logo.sh ntp.sh route upnp_xml.sh
cat echo iwconfig ntpclient rt2860apd upnpd
chmod expr iwpriv nvram_daemon rtinicapd uptime
chpasswd firewall.sh kill nvram_get sed vconfig
chpasswd.sh free killall nvram_set ser2net vpn-passthru.sh
config-dns.sh getty klogd ping sh wan.sh
config-dslite.sh global.sh lan.sh ping6 sleep wc
config-iTunes.sh goahead lld2d poweroff snmp.sh wifi_unload.sh
config-igmpproxy.sh gpio logger pppd snort.sh wscd
config-l2tp.sh grep login pppoe-relay switch
config-powersave.sh halt logread pppoe.sh syslogd
# free
total used free shared buffers
Mem: 13788 12744 1044 0 880
Swap: 0 0 0
Total: 13788 12744 1044
[ 0.000000] Linux version 3.10.4 (lich@lich-pc) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2012.12 r37734) ) #5 Thu Aug 8 09:47:35 CST 2013
[ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[ 0.000000] MIPS: machine is HILINK HLK-RM04
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=0000c610
[ 0.000000] Readback ErrCtl register=0000c610
[ 0.000000] Memory: 29420k/32768k available (2104k kernel code, 3348k reserved, 525k data, 184k init, 0k highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:128
[ 0.000000] CPU Clock: 360MHz
[ 0.000000] systick: runing - mult: 214748, shift: 32
[ 0.000000] Calibrating delay loop... 479.23 BogoMIPS (lpj=2396160)
[ 0.060000] pid_max: default: 32768 minimum: 301
[ 0.060000] Mount-cache hash table entries: 512
[ 0.070000] NET: Registered protocol family 16
[ 0.090000] bio: create slab <bio-0> at 0
[ 0.100000] rt2880_gpio 10000600.gpio: registering 24 gpios
[ 0.100000] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[ 0.110000] Switching to clocksource systick
[ 0.120000] NET: Registered protocol family 2
[ 0.120000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.140000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.140000] TCP: Hash tables configured (established 512 bind 512)
[ 0.160000] TCP: reno registered
[ 0.160000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.180000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.190000] NET: Registered protocol family 1
[ 0.200000] rt-timer 10000100.timer: maximum frequncy is 7324Hz
[ 0.240000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.260000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.290000] msgmni has been set to 57
[ 0.290000] io scheduler noop registered
[ 0.290000] io scheduler deadline registered (default)
[ 0.310000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.330000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20) is a 16550A
[ 0.350000] console [ttyS0] enabled, bootconsole disabled
[ 0.350000] console [ttyS0] enabled, bootconsole disabled
[ 0.370000] 10000500.uart: ttyS1 at MMIO 0x10000500 (irq = 13) is a 16550A
[ 0.390000] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[ 0.390000] 4 ofpart partitions found on MTD device spi0.0
[ 0.410000] Creating 4 MTD partitions on "spi0.0":
[ 0.420000] 0x000000000000-0x000000030000 : "u-boot"
[ 0.440000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 0.440000] 0x000000040000-0x000000050000 : "factory"
[ 0.460000] 0x000000050000-0x000000400000 : "firmware"
[ 0.480000] 0x00000013aff8-0x000000400000 : "rootfs"
[ 0.480000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.520000] mtd: partition "rootfs" set to be root filesystem
[ 0.520000] mtd: partition "rootfs_data" created automatically, ofs=0x300000, len=0x100000
[ 0.550000] 0x000000300000-0x000000400000 : "rootfs_data"
[ 0.570000] eth0: done loading
[ 0.570000] rt3xxx-usbphy ubsphy.2: loaded
[ 0.590000] rt2880_wdt 10000120.watchdog: Initialized
[ 0.590000] TCP: cubic registered
[ 0.610000] NET: Registered protocol family 17
[ 0.610000] 8021q: 802.1Q VLAN Support v1.8
[ 0.630000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 0.660000] Freeing unused kernel memory: 184K (80292000 - 802c0000)
procd: Console is alive
procd: - watchdog -
[ 5.140000] usbcore: registered new interface driver usbfs
[ 5.140000] usbcore: registered new interface driver hub
[ 5.160000] usbcore: registered new device driver usb
[ 5.360000] Button Hotplug driver version 0.4.1
[ 5.490000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.510000] ehci-platform: EHCI generic platform driver
[ 5.920000] rt3xxx-usbphy ubsphy.2: remote usb device wakeup disabled
[ 5.930000] rt3xxx-usbphy ubsphy.2: UTMI 16bit 30MHz
[ 5.940000] ehci-platform 101c0000.ehci: EHCI Host Controller
[ 5.960000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[ 5.960000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[ 6.000000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[ 6.020000] hub 1-0:1.0: USB hub found
[ 6.020000] hub 1-0:1.0: 1 port detected
[ 6.100000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.100000] ohci-platform 101c1000.ohci: Generic Platform OHCI Controller
[ 6.100000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[ 6.100000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[ 6.430000] hub 2-0:1.0: USB hub found
[ 6.430000] hub 2-0:1.0: 1 port detected
[ 6.560000] input: gpio-keys-polled.3 as /devices/gpio-keys-polled.3/input/input0
procd: - preinit -
[ 7.410000] rt305x-esw 10110000.esw: link changed 0x00
Press the [f] key and hit [enter] to enter failsafe mode
[ 9.110000] rt305x-esw 10110000.esw: link changed 0x08
mount_root: jffs2 is not ready - marker found
procd: - early -
procd: - watchdog -
procd: - init -
Please press Enter to activate this console.
[ 13.530000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
[ 13.550000] Backport generated by backports.git backports-20130617-4-ge3220f5
[ 13.630000] cfg80211: Calling CRDA to update world regulatory domain
[ 13.630000] cfg80211: World regulatory domain updated:
[ 13.650000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.670000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.680000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.700000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.720000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.720000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.970000] NET: Registered protocol family 10
[ 15.910000] rt2800_wmac 10180000.wmac: failed to load eeprom property
[ 15.930000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'.
[ 16.140000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5350, rev 0500 detected
[ 16.140000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5350 detected
[ 16.210000] PPP generic driver version 2.4.2
[ 16.460000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.500000] xt_time: kernel timezone is -0000
[ 16.590000] NET: Registered protocol family 24
[ 16.590000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 17.630000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.710000] usbcore: registered new interface driver cdc_acm
[ 17.710000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 17.900000] usbcore: registered new interface driver usbserial
[ 17.900000] usbcore: registered new interface driver usbserial_generic
[ 17.900000] usbserial: USB Serial support registered for generic
[ 17.900000] usbcore: registered new interface driver asix
[ 17.900000] usbcore: registered new interface driver cdc_ether
[ 18.520000] usbcore: registered new interface driver rndis_host
[ 18.540000] usbcore: registered new interface driver option
[ 18.560000] usbserial: USB Serial support registered for GSM modem (1-port)
[ 23.000000] rt305x-esw 10110000.esw: link changed 0x00
[ 24.450000] rt305x-esw 10110000.esw: link changed 0x08
[ 24.820000] device eth0.1 entered promiscuous mode
[ 24.820000] device eth0 entered promiscuous mode
[ 24.870000] br-lan: port 1(eth0.1) entered forwarding state
[ 24.870000] br-lan: port 1(eth0.1) entered forwarding state
[ 26.080000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 26.870000] br-lan: port 1(eth0.1) entered forwarding state
[ 36.000000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 36.040000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 36.040000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 43.790000] jffs2: notice: (978) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
procd: - init complete -
BusyBox v1.19.4 (2013-08-07 10:18:07 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r37737)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/# cat /proc/mtd
dev: size erasesize name
mtd0: 00030000 00010000 "u-boot"
mtd1: 00010000 00010000 "u-boot-env"
mtd2: 00010000 00010000 "factory"
mtd3: 003b0000 00010000 "firmware"
mtd4: 002c5008 00010000 "rootfs"
mtd5: 00100000 00010000 "rootfs_data"
root@OpenWrt:/# ifconfig
br-lan Link encap:Ethernet HWaddr 44:33:4C:A4:05:02
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::4633:4cff:fea4:502/64 Scope:Link
inet6 addr: fd93:58cd:8d01::1/60 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:37 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5966 (5.8 KiB) TX bytes:1504 (1.4 KiB)
eth0 Link encap:Ethernet HWaddr 46:33:4C:A4:05:02
inet6 addr: fe80::4433:4cff:fea4:502/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:37 errors:0 dropped:0 overruns:0 frame:0
TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6632 (6.4 KiB) TX bytes:14645 (14.3 KiB)
Interrupt:5
eth0.1 Link encap:Ethernet HWaddr 46:33:4C:A4:05:02
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:37 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5966 (5.8 KiB) TX bytes:1504 (1.4 KiB)
eth0.2 Link encap:Ethernet HWaddr 44:33:4C:A4:05:03
inet6 addr: fe80::4633:4cff:fea4:503/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:11412 (11.1 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:528 errors:0 dropped:0 overruns:0 frame:0
TX packets:528 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:35904 (35.0 KiB) TX bytes:35904 (35.0 KiB)
root@OpenWrt:/# free
total used free shared buffers
Mem: 29604 15816 13788 0 1540
-/+ buffers: 14276 15328
Swap: 0 0 0
root@OpenWrt:/#