ZAPI Redistribute Message not receiving

[sakthishanmugam02]

I am not receiving route redistribute events to my zapi client. the show zebra client shows below output

My FRR version is: 8.5.1 (previously the same code used to work with 8.5 version) - any idea why it is not working?

Client: bgp
------------------------
FD: 48
Connect Time: 00:05:29
Not registered for Nexthop Updates
Client will Not be notified about the status of its routes.
Last Msg Rx Time: 00:05:29
Last Msg Tx Time: 00:05:28
Last Rcvd Cmd: ZEBRA_REDISTRIBUTE_ADD
Last Sent Cmd: ZEBRA_INTERFACE_BFD_DEST_UPDATE

Type        Add         Update      Del
==================================================
IPv4        0           0           0
IPv6        0           0           0
Redist:v4   0           0           0
Redist:v6   0           0           0
VRF         1           0           0
Connected   0           0           0
Interface   0           0           0
Intf Addr   0           0           0
BFD peer    0           0           0
NHT v4      0           0           0
NHT v6      0           0           0
VxLAN SG    0           0           0
VNI         0           0           0
L3-VNI      0           0           0
MAC-IP      0           0           0
ES          0           0           0
ES-EVI      0           0           0
Errors: 0

[donaldsharp]

We really have insufficient data to help out here at all. show run as well as a show ip route XXX where XXX is the route type being redistributed should be a good starting spot

[sakthishanmugam02]

@donaldsharp

here is the reference:

 show run
Building configuration...

Current configuration:
!
frr version 8.5.1
frr defaults traditional
hostname drs-image-builder-vsi
no ipv6 forwarding
hostname drs-infra4
no service integrated-vtysh-config
!
router bgp 64626
 no bgp network import-check
 neighbor 10.30.48.14 remote-as 64627
 neighbor 10.30.48.14 bfd
 neighbor 10.30.48.14 bfd profile peer_5
 neighbor 10.30.48.14 password pass
 neighbor 10.30.48.14 ebgp-multihop 255
 !
 address-family ipv4 unicast
  neighbor 10.30.48.14 maximum-prefix 20
  neighbor 10.30.48.14 route-map rmap-peer-5-in in
  neighbor 10.30.48.14 route-map rmap-peer-5-out out
 exit-address-family
exit
!
route-map rmap-peer-5-in permit 10
exit
!
ip nht resolve-via-default
!
bfd
 profile peer_5
  transmit-interval 500
  receive-interval 500
  minimum-ttl 1
 exit
 !
exit
!
end

and

drs-infra4# show ip route bgp
Codes: K - kernel route, C - connected, S - static, R - RIP,
       O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
       T - Table, A - Babel, F - PBR, f - OpenFabric,
       > - selected route, * - FIB route, q - queued, r - rejected, b - backup
       t - trapped, o - offload failure

B>r 10.0.1.0/24 [20/0] via 10.30.48.63, eth1, weight 1, 00:01:59

To give some background - I have go program that is act as a zapi client,

and it is shown here

Client: bgp
------------------------
FD: 47
Connect Time: 00:03:35
Not registered for Nexthop Updates
Client will Not be notified about the status of its routes.
Last Msg Rx Time: 00:03:35
Last Msg Tx Time: 00:03:34
Last Rcvd Cmd: ZEBRA_REDISTRIBUTE_ADD
Last Sent Cmd: ZEBRA_INTERFACE_BFD_DEST_UPDATE

Type        Add         Update      Del
==================================================
IPv4        0           0           0
IPv6        0           0           0
Redist:v4   0           0           0
Redist:v6   0           0           0
VRF         1           0           0
Connected   0           0           0
Interface   0           0           0
Intf Addr   0           0           0
BFD peer    0           0           0
NHT v4      0           0           0
NHT v6      0           0           0
VxLAN SG    0           0           0
VNI         0           0           0
L3-VNI      0           0           0
MAC-IP      0           0           0
ES          0           0           0
ES-EVI      0           0           0
Errors: 0

I am not seeing any message to my client when it is advertised by the peer

[donaldsharp]

bgp needs a redistribute XXX statement in order for any redistrubtion to happen between bgp and zebra

[sakthishanmugam02]

@donaldsharp thanks for the quick response, I added this line

redistribute table route-map rmap-peer-5-in

after that my client program receives only delete (withdraw) route messages but not when adding (advertising). what could be the problem?