Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Taz would not reach ABS printing temperature #12

Open
jubeormk1 opened this issue Jul 5, 2022 · 2 comments
Open

Taz would not reach ABS printing temperature #12

jubeormk1 opened this issue Jul 5, 2022 · 2 comments

Comments

@jubeormk1
Copy link

After 15 minutes:

  • Nozzle 198/240
  • Bed 110/110
  • Room temperature: 17

All temperatures Celsius
@PancakeLegend
Copy link
Member

Explored on 2022-11-21.
Issue is intermittent. Heat cartridge can take a long time to get to temp, if at all. Moving the loom connecting to the hot end can "fix" it temporarily. Recommend replacing heat cartridge.

@PancakeLegend
Copy link
Member

Tested again and took several minutes to get to 240°. Will replace the thermal cartridge with the hotend when it arrives. If the issue persists, I will then assume an issue upstream.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@PancakeLegend @jubeormk1